Veining (metallurgy)


In metallurgy a veining is the occurrence of a sheet like casting defect, produced by molten metal penetration into a sand casting mould.

Description

Veining occurs as 'vein' like projections from a casting, usually at right angles to the casting's surface; the phenonoma can occur in any alloy, and is commonly seen in ferrous or copper based castings.
Veining has been attributed to temperature differences at distance from the molten metal resulting in differential thermal expansion in the sand leading to strain in, and failure of the sand mould. Research has shown that a main cause of veining is thermal expansion of the silica sand in combination with reduction in sand volume above 573C due to softening/sintering and/or melting of sand grains, which results in cracking/voids.
Veining can be reduced or avoided by the use of more refractory non-silica sands ; by flux additives which lower the temperature of silica transition to tridymite or cristobalite, or which sinter the sand increasing resistance to failure; or by organic additives which are decomposed to carbon at high temperature, which then bonds to silica increasing strength, imparting veining resistance.