The universal integrated circuit card, also known as a SIM card, is the smart card used in mobile terminals in GSM and UMTS networks. The UICC ensures the integrity and security of all kinds of personal data, and it typically holds a few hundred kilobytes. In a GSM network, the UICC contains a SIM application and in a UMTS network, it contains a USIMapplication. A UICC may contain several applications, making it possible for the same smart card to give access to both GSM and UMTS networks, and also provide storage of a phone book and other applications. It is also possible to access a GSM network using a USIM application and it is possible to access UMTS networks using a SIM application with mobile terminals prepared for this. With the UMT release 5 a new application, the IP multimedia Services Identity Module is required for services in the IMS. The telephone book is a separate application and not part of either subscriber identity module. In a cdmaOne/CDMA2000 network, the UICC contains a CSIM application, in addition to 3GPP USIM and SIM applications. A card with all 3 features is called a removable user identity card, or R-UIM. Thus, the R-UIM card can be inserted into CDMA, GSM, or UMTS handsets, and will work in all three cases. In 2G networks, the SIM card and SIM application were bound together, so that "SIM card" could mean the physical card, or any physical card with the SIM application. In 3G networks, it is a mistake to speak of a USIM, CSIM, or SIM card, as all three are applications running on a UICC card. SIM card. The UICC smart card consists of a CPU, ROM, RAM, EEPROM and I/O circuits. Early versions consisted of the whole full-size smart card. Soon the race for smaller telephones called for a smaller version of the card. The card was cropped down to 50 × 15 mm, as illustrated. Since the card slot is standardized, a subscriber can easily move their wireless account and phone number from one handset to another. This will also transfer their phone book and text messages. Similarly, usually a subscriber can change carriers by inserting a new carrier's UICC card into their existing handset. However, it is not always possible because some carriers SIM-lock the phones that they sell, preventing rival carriers' cards from being used. The use and content of the card can be protected by use of PIN codes. One code, PIN1, can be defined to control normal use of the phone. Another code, PIN2, can be set, to allow the use of special functions. PUK1 and PUK2 is used to reset PIN1 and PIN2 respectively. The integration of the ETSI framework and the Application management framework of GlobalPlatform is standardized in the UICC configuration.
