Trigonometric functions
In mathematics, the trigonometric functions are real functions which relate an angle of a right-angled triangle to ratios of two side lengths. They are widely used in all sciences that are related to geometry, such as navigation, solid mechanics, celestial mechanics, geodesy, and many others. They are among the simplest periodic functions, and as such are also widely used for studying periodic phenomena, through Fourier analysis.
The most widely used trigonometric functions are the sine, the cosine, and the tangent. Their reciprocals are respectively the cosecant, the secant, and the cotangent, which are less used in modern mathematics.
The oldest definitions of trigonometric functions, related to right-angle triangles, define them only for acute angles. For extending these definitions to functions whose domain is the whole projectively extended real line, one can use geometrical definitions using the standard unit circle. Modern definitions express trigonometric functions as infinite series or as solutions of differential equations. This allows extending the domain of the sine and the cosine functions to the whole complex plane, and the domain of the other trigonometric functions to the complex plane from which some isolated points are removed.
Right-angled triangle definitions
In this section, the same upper-case letter denotes a vertex of a triangle and the measure of the corresponding angle; the same lower case letter denotes an edge of the triangle and its length.Given an acute angle = of a right-angled triangle, the hypotenuse is the side that connects the two acute angles. The side adjacent to is the side of the triangle that connects to the right angle. The third side is said opposite to.
If the angle is given, then all sides of the right-angled triangle are well defined up to a scaling factor. This means that the ratio of any two side lengths depends only on. These six ratios define thus six functions of, which are the trigonometric functions. More precisely, the six trigonometric functions are:
;sine:
;cosine:
;tangent:
;cosecant:
;secant:
;cotangent:
In a right angled triangle, the sum of the two acute angles is a right angle, that is 90° or radians.
Radians versus degrees
In geometric applications, the argument of a trigonometric function is generally the measure of an angle. For this purpose, any angular unit is convenient, and angles are most commonly measured in degrees.When using trigonometric function in calculus, their argument is generally not an angle, but rather a real number. In this case, it is more suitable to express the argument of the trigonometric as the length of the arc of the unit circle delimited by an angle with the center of the circle as vertex. Therefore, one uses the radian as angular unit: a radian is the angle that delimits an arc of length on the unit circle. A complete turn is thus an angle of radians.
A great advantage of radians is that many formulas are much simpler when using them, typically all formulas relative to derivatives and integrals.
This is thus a general convention that, when the angular unit is not explicitly specified, the arguments of trigonometric functions are always expressed in radians.
Unit-circle definitions
The six trigonometric functions can be defined as coordinate values of points on the Euclidean plane that are related to the unit circle, which is the circle of radius one centered at the origin of this coordinate system. While [|right-angled triangle definitions] permit the definition of the trigonometric functions for angles between and radian the unit circle definitions allow to extend the domain of the trigonometric functions to all positive and negative real numbers.Rotating a ray from the direction of the positive half of the x-axis by an angle yields intersection points of this ray with the unit and, by extending the ray to a line if necessary, with the and with the The tangent line to the unit circle in point, which is orthogonal to this ray, intersects the y- and x-axis in points and. The coordinate values of these points give all the existing values of the trigonometric functions for arbitrary real values of in the following manner.
The trigonometric functions and are defined, respectively, as the x- and y-coordinate values of point, i.e.,
In the range this definition coincides with the right-angled triangle definition by taking the right-angled triangle to have the unit radius as hypotenuse, and since for all points on the unit circle the equation holds, this definition of cosine and sine also satisfies the Pythagorean identity
The other trigonometric functions can be found along the unit circle as
By applying the Pythagorean identity and geometric proof methods, these definitions can readily be shown to coincide with the definitions of tangent, cotangent, secant and cosecant in terms of sine and cosine, that is
File:Trigonometric functions.svg|right|thumb|300px|link=|Trigonometric functions:
-
As a rotation of an angle of does not change the position or size of a shape, the points,,,, and are the same for two angles whose difference is an integer multiple of. Thus trigonometric functions are periodic functions with period. That is, the equalities
hold for any angle and any integer. The same is true for the four other trigonometric functions. Observing the sign and the monotonicity of the functions sine, cosine, cosecant, and secant in the four quadrants, shows that is the smallest value for which they are periodic, i.e., is the fundamental period of these functions. However, already after a rotation by an angle the points and return to their original position, so that the tangent function and the cotangent function have a fundamental period of. That is, the equalities
hold for any angle and any integer.
Algebraic values
The algebraic expressions for the most important angles are as follows:Writing the numerators as square roots of consecutive non-negative integers, with a denominator of 2, provides an easy way to remember the values.
Such simple expressions generally do not exist for other angles which are rational multiples of a straight angle.
For an angle which, measured in degrees, is a multiple of three, the sine and the cosine may be expressed in terms of square roots, see Trigonometric constants expressed in real radicals. These values of the sine and the cosine may thus be constructed by ruler and compass.
For an angle of an integer number of degrees, the sine and the cosine may be expressed in terms of square roots and the cube root of a non-real complex number. Galois theory allows proving that, if the angle is not a multiple of 3°, non-real cube roots are unavoidable.
For an angle which, measured in degrees, is a rational number, the sine and the cosine are algebraic numbers, which may be expressed in terms of th roots. This results from the fact that the Galois groups of the cyclotomic polynomials are cyclic.
For an angle which, measured in degrees, is not a rational number, then either the angle or both the sine and the cosine are transcendental numbers. This is a corollary of Baker's theorem, proved in 1966.
Simple algebraic values
The following table summarizes the simplest algebraic values of trigonometric functions. The symbol represents the point at infinity on the projectively extended real line; it is not signed, because, when it appears in the table, the corresponding trigonometric function tends to on one side, and to on the other side, when the argument tends to the value in the table.In calculus
Trigonometric functions are differentiable. This is not immediately evident from the above geometrical definitions. Moreover, the modern trend in mathematics is to build geometry from calculus rather than the converse. Therefore, except at a very elementary level, trigonometric functions are defined using the methods of calculus.For defining trigonometric functions inside calculus, there are two equivalent possibilities, either using power series or differential equations. These definitions are equivalent, as starting from one of them, it is easy to retrieve the other as a property. However the definition through differential equations is somehow more natural, since, for example, the choice of the coefficients of the power series may appear as quite arbitrary, and the Pythagorean identity is much easier to deduce from the differential equations.
Definition by differential equations
Sine and cosine are the unique differentiable functions such thatDifferentiating these equations, one gets that both sine and cosine are solutions of the differential equation
Applying the quotient rule to the definition of the tangent as the quotient of the sine by the cosine, one gets that the tangent function verifies
Power series expansion
Applying the differential equations to power series with indeterminate coefficients, one may deduce recurrence relations for the coefficients of the Taylor series of the sine and cosine functions. These recurrence relations are easy to solve, and give the series expansionsThe radius of convergence of these series is infinite. Therefore, the sine and the cosine can be extended to entire functions, which are complex-valued functions that are defined and holomorphic on the whole complex plane.
Being defined as fractions of entire functions, the other trigonometric functions may be extended to meromorphic functions, that is functions that are holomorphic in the whole complex plane, except some isolated points called poles. Here, the poles are the numbers of the form for the tangent and the secant, or for the cotangent and the cosecant, where is an arbitrary integer.
Recurrences relations may also be computed for the coefficients of the Taylor series of the other trigonometric functions. These series have a finite radius of convergence. Their coefficients have a combinatorial interpretation: they enumerate alternating permutations of finite sets.
More precisely, defining
one has the following series expansions:
There is a series representation as partial fraction expansion where just translated reciprocal functions are summed up, such that the poles of the cotangent function and the reciprocal functions match:
This identity can be proven with the Herglotz trick.
Combining the th with the th term lead to absolutely convergent series:
Infinite product expansion
The following infinite product for the sine is of great importance in complex analysis:For the proof of this expansion, see Sine. From this, it can be deduced that
Relationship to exponential function (Euler's formula)
relates sine and cosine to the exponential function:This formula is commonly considered for real values of, but it remains true for all complex values.
Proof: Let and One has for. The quotient rule implies thus that. Therefore, is a constant function, which equals, as This proves the formula.
One has
Solving this linear system in sine and cosine, one can express them in terms of the exponential function:
When is real, this may be rewritten as
Most trigonometric identities can be proved by expressing trigonometric functions in terms of the complex exponential function by using above formulas, and then using the identity for simplifying the result.
Definitions using functional equations
One can also define the trigonometric functions using various functional equations.For example, the sine and the cosine form the unique pair of continuous functions that satisfy the difference formula
and the added condition
In the complex plane
The sine and cosine of a complex number can be expressed in terms of real sines, cosines, and hyperbolic functions as follows:By taking advantage of domain coloring, it is possible to graph the trigonometric functions as complex-valued functions. Various features unique to the complex functions can be seen from the graph; for example, the sine and cosine functions can be seen to be unbounded as the imaginary part of becomes larger, and the fact that the functions contain simple zeros or poles is apparent from the fact that the hue cycles around each zero or pole exactly once. Comparing these graphs with those of the corresponding Hyperbolic functions highlights the relationships between the two.
Basic identities
Many identities interrelate the trigonometric functions. This section contains the most basic ones; for more identities, see List of trigonometric identities. These identities may be proved geometrically from the unit-circle definitions or the right-angled-triangle definitions. For non-geometrical proofs using only tools of calculus, one may use directly the differential equations, in a way that is similar to that of the [|above proof] of Euler's identity. One can also use Euler's identity for expressing all trigonometric functions in terms of complex exponentials and using properties of the exponential function.Parity
The cosine and the secant are even functions; the other trigonometric functions are odd functions. That is:Periods
All trigonometric functions are periodic functions of period. This is the smallest period, except for the tangent and the cotangent, which have as smallest period. This means that, for every integer, one hasPythagorean identity
The Pythagorean identity, is the expression of the Pythagorean theorem in terms of trigonometric functions. It isSum and difference formulas
The sum and difference formulas allow expanding the sine, the cosine, and the tangent of a sum or a difference of two angles in terms of sines and cosines and tangents of the angles themselves. These can be derived geometrically, using arguments that date to Ptolemy. One can also produce them algebraically using Euler's formula.; Sum
; Difference
When the two angles are equal, the sum formulas reduce to simpler equations known as the double-angle formulae.
These identities can be used to derive the product-to-sum identities.
By setting and this allows expressing all trigonometric functions of as a rational fraction of :
Together with
this is the tangent half-angle substitution, which allows reducing the computation of integrals and antiderivatives of trigonometric functions to that of rational fractions.
Derivatives and antiderivatives
The derivatives of trigonometric functions result from those of sine and cosine by applying quotient rule. The values given for the antiderivatives in the following table can be verified by differentiating them. The number is a constant of integration.Inverse functions
The trigonometric functions are periodic, and hence not injective, so strictly speaking, they do not have an inverse function. However, on each interval on which a trigonometric function is monotonic, one can define an inverse function, and this defines inverse trigonometric functions as multivalued functions. To define a true inverse function, one must restrict the domain to an interval where the function is monotonic, and is thus bijective from this interval to its image by the function. The common choice for this interval, called the set of principal values, is given in the following table. As usual, the inverse trigonometric functions are denoted with the prefix "arc" before the name or its abbreviation of the function.The notations sin−1, cos−1, etc. are often used for arcsin and arccos, etc. When this notation is used, inverse functions could be confused with multiplicative inverses. The notation with the "arc" prefix avoids such a confusion, though "arcsec" for arcsecant can be confused with "arcsecond".
Just like the sine and cosine, the inverse trigonometric functions can also be expressed in terms of infinite series. They can also be expressed in terms of complex logarithms. See Inverse trigonometric functions for details.
Applications
Angles and sides of a triangle
In this sections denote the three angles of a triangle, and denote the lengths of the respective opposite edges. They are related by various formulas, which are named by the trigonometric functions they involve.Law of sines
The law of sines states that for an arbitrary triangle with sides,, and and angles opposite those sides, and :where is the area of the triangle,
or, equivalently,
where is the triangle's circumradius.
It can be proven by dividing the triangle into two right ones and using the above definition of sine. The law of sines is useful for computing the lengths of the unknown sides in a triangle if two angles and one side are known. This is a common situation occurring in triangulation, a technique to determine unknown distances by measuring two angles and an accessible enclosed distance.
Law of cosines
The law of cosines is an extension of the Pythagorean theorem:or equivalently,
In this formula the angle at is opposite to the side . This theorem can be proven by dividing the triangle into two right ones and using the Pythagorean theorem.
The law of cosines can be used to determine a side of a triangle if two sides and the angle between them are known. It can also be used to find the cosines of an angle if the lengths of all the sides are known.
Law of tangents
The following all form the law of tangentsThe explanation of the formulae in words would be cumbersome, but the patterns of sums and differences, for the lengths and corresponding opposite angles, are apparent in the theorem.
Law of cotangents
Ifand
then the following all form the law of cotangents
It follows that
In words the theorem is: the cotangent of a half-angle equals the ratio of the semi-perimeter minus the opposite side to the said angle, to the inradius for the triangle.
, a figure formed with a trigonometry-based function.
Periodic functions
The trigonometric functions are also important in physics. The sine and the cosine functions, for example, are used to describe simple harmonic motion, which models many natural phenomena, such as the movement of a mass attached to a spring and, for small angles, the pendular motion of a mass hanging by a string. The sine and cosine functions are one-dimensional projections of uniform circular motion.Trigonometric functions also prove to be useful in the study of general periodic functions. The characteristic wave patterns of periodic functions are useful for modeling recurring phenomena such as sound or light waves.
Under rather general conditions, a periodic function can be expressed as a sum of sine waves or cosine waves in a Fourier series. Denoting the sine or cosine basis functions by, the expansion of the periodic function takes the form:
For example, the square wave can be written as the Fourier series
In the animation of a square wave at top right it can be seen that just a few terms already produce a fairly good approximation. The superposition of several terms in the expansion of a sawtooth wave are shown underneath.
History
While the early study of trigonometry can be traced to antiquity, the trigonometric functions as they are in use today were developed in the medieval period. The chord function was discovered by Hipparchus of Nicaea and Ptolemy of Roman Egypt. The functions of sine and versine can be traced back to the jyā and koti-jyā functions used in Gupta period Indian astronomy, via translation from Sanskrit to Arabic and then from Arabic to Latin.All six trigonometric functions in current use were known in Islamic mathematics by the 9th century, as was the law of sines, used in solving triangles. With the exception of the sine, the other five modern trigonometric functions were discovered by Arabic mathematicians, including the cosine, tangent, cotangent, secant and cosecant. Al-Khwārizmī produced tables of sines, cosines and tangents. Circa 830, Habash al-Hasib al-Marwazi discovered the cotangent, and produced tables of tangents and cotangents. Muhammad ibn Jābir al-Harrānī al-Battānī discovered the reciprocal functions of secant and cosecant, and produced the first table of cosecants for each degree from 1° to 90°. The trigonometric functions were later studied by mathematicians including Omar Khayyám, Bhāskara II, Nasir al-Din al-Tusi, Jamshīd al-Kāshī, Ulugh Beg, Regiomontanus, Rheticus, and Rheticus' student Valentinus Otho.
Madhava of Sangamagrama made early strides in the analysis of trigonometric functions in terms of infinite series.
The terms tangent and secant were first introduced by the Danish mathematician Thomas Fincke in his book Geometria rotundi.
The 16th century French mathematician Albert Girard made the first published use of the abbreviations sin, cos, and tan in his book Trigonométrie.
In a paper published in 1682, Leibniz proved that is not an algebraic function of.
Leonhard Euler's Introductio in analysin infinitorum was mostly responsible for establishing the analytic treatment of trigonometric functions in Europe, also defining them as infinite series and presenting "Euler's formula", as well as near-modern abbreviations.
A few functions were common historically, but are now seldom used, such as the chord, the versine, the coversine, the haversine, the exsecant and the excosecant. The list of trigonometric identities shows more relations between these functions.
- )
Etymology
The choice was based on a misreading of the Arabic written form j-y-b, which itself originated as a transliteration from Sanskrit ', which along with its synonym translates to "bowstring", being in turn adopted from Ancient Greek Chord "string".
The word tangent comes from Latin tangens meaning "touching", since the line touches the circle of unit radius, whereas secant stems from Latin secans—"cutting"—since the line cuts the circle.
The prefix "co-" is found in Edmund Gunter's Canon triangulorum, which defines the cosinus as an abbreviation for the sinus complementi and proceeds to define the cotangens similarly.