The Art of Computer Programming
The Art of Computer Programming is a comprehensive monograph written by computer scientist Donald Knuth that covers many kinds of programming algorithms and their analysis.
Knuth began the project, originally conceived as a single book with twelve chapters, in 1962. The first three volumes of what was then expected to be a seven-volume set were published in 1968, 1969, and 1973. Work began in earnest on Volume 4 in 1973, but was suspended in 1977 for work on typesetting. Writing of the final copy of Volume 4A began in longhand in 2001, and the first online pre-fascicle, 2A, appeared later in 2001. The first published installment of Volume 4 appeared in paperback as Fascicle 2 in 2005.
The hardback Volume 4A, combining Volume 4, Fascicles 0–4, was published in 2011. Volume 4, Fascicle 6 was released in December 2015; Volume 4, Fascicle 5 was released in November 2019.
Fascicles 5 and 6 are expected to comprise the first two-thirds of Volume 4B. Knuth has not announced any estimated date for release of Volume 4B, although his method used for Volume 4A is to release the hardback volume sometime after release of the paperback fascicles that comprise it. Near-term publisher estimates put the release date at May or June of 2019, which proved to be incorrect.
History
After winning a Westinghouse Talent Search scholarship, Knuth enrolled at the Case Institute of Technology, where his performance was so outstanding that the faculty voted to award him a master of science upon his completion of the baccalaureate degree. During his summer vacations, Knuth was hired by the Burroughs Corporation to write compilers, earning more in his summer months than full professors did for an entire year. Such exploits made Knuth a topic of discussion among the mathematics department, which included Richard S. Varga.In January 1962, when he was a graduate student in the mathematics department at Caltech, Knuth was approached by Addison-Wesley to write a book about compiler design, and he proposed a larger scope. He came up with a list of 12 chapter titles the same day. In the summer of 1962 he worked on a FORTRAN compiler for UNIVAC. During this time, he also came up with a mathematical analysis of linear probing, which convinced him to present the material with a quantitative approach. After receiving his PhD in June 1963, he began working on his manuscript, of which he finished his first draft in June 1965, at hand-written pages. He had assumed that about five hand-written pages would translate into one printed page, but his publisher said instead that about hand-written pages translated to one printed page. This meant he had approximately printed pages of material, which closely matches the size of the first three published volumes. The publisher was nervous about accepting such a project from a graduate student. At this point, Knuth received support from Richard S. Varga, who was the scientific adviser to the publisher. Varga was visiting Olga Taussky-Todd and John Todd at Caltech. With Varga's enthusiastic endorsement, the publisher accepted Knuth's expanded plans. In its expanded version, the book would be published in seven volumes, each with just one or two chapters. Due to the growth in the material, the plan for Volume 4 has since expanded to include Volumes 4A, 4B, 4C, 4D, and possibly more.
In 1976, Knuth prepared a second edition of Volume 2, requiring it to be typeset again, but the style of type used in the first edition was no longer available. In 1977, he decided to spend some time creating something more suitable. Eight years later, he returned with TEX, which is currently used for all volumes.
The offer of a so-called Knuth reward check worth "one hexadecimal dollar" for any errors found, and the correction of these errors in subsequent printings, has contributed to the highly polished and still-authoritative nature of the work, long after its first publication. Another characteristic of the volumes is the variation in the difficulty of the exercises. Knuth even has a numerical difficulty scale for rating those exercises, varying from 0 to 50, where 0 is trivial, and 50 is an open question in contemporary research.
Knuth's dedication reads:
This series of books is affectionately dedicated
to the Type 650 computer once installed at
Case Institute of Technology,
with whom I have spent many pleasant evenings.
Assembly language in the book
All examples in the books use a language called "MIX assembly language", which runs on the hypothetical MIX computer. Currently, the MIX computer is being replaced by the MMIX computer, which is a RISC version. Software such as GNU MDK exists to provide emulation of the MIX architecture. Knuth considers the use of assembly language necessary for the speed and memory usage of algorithms to be judged.Critical response
Knuth was awarded the 1974 Turing Award "for his major contributions to the analysis of algorithms , and in particular for his contributions to the 'art of computer programming' through his well-known books in a continuous series by this title." American Scientist has included this work among "100 or so Books that shaped a Century of Science", referring to the twentieth century, and within the computer science community it is regarded as the first and still the best comprehensive treatment of its subject. Covers of the third edition of Volume 1 quote Bill Gates as saying, "If you think you're a really good programmer… read Art of Computer Programming… You should definitely send me a résumé if you can read the whole thing." The New York Times referred to it as "the profession's defining treatise".Volumes
Completed
- Volume 1 – Fundamental Algorithms
- Volume 2 – Seminumerical Algorithms
- Volume 3 – Sorting and Searching
- Volume 4A – Combinatorial Algorithms
Planned
- Volume 4B... – Combinatorial Algorithms
- Volume 5 – Syntactic Algorithms
- Volume 6 – The Theory of Context-Free Languages
- Volume 7 – Compiler Techniques
Chapter outlines
Completed
Volume 1 – Fundamental Algorithms
- Chapter 1 – Basic concepts
- *1.1. Algorithms
- *1.2. Mathematical Preliminaries
- **1.2.1. Mathematical Induction
- **1.2.2. Numbers, Powers, and Logarithms
- **1.2.3. Sums and Products
- **1.2.4. Integer Functions and Elementary Number Theory
- **1.2.5. Permutations and Factorials
- **1.2.6. Binomial Coefficients
- **1.2.7. Harmonic Numbers
- **1.2.8. Fibonacci Numbers
- **1.2.9. Generating Functions
- **1.2.10. Analysis of an Algorithm
- **1.2.11. Asymptotic Representations
- ***1.2.11.1. The O-notation
- ***1.2.11.2. Euler's summation formula
- ***1.2.11.3. Some asymptotic calculations
- *1.3 MMIX
- **1.3.1. Description of MMIX
- **1.3.2. The MMIX Assembly Language
- **1.3.3. Applications to Permutations
- *1.4. Some Fundamental Programming Techniques
- **1.4.1. Subroutines
- **1.4.2. Coroutines
- **1.4.3. Interpretive Routines
- ***1.4.3.1. A MIX simulator
- ***1.4.3.2. Trace routines
- **1.4.4. Input and Output
- **1.4.5. History and Bibliography
- Chapter 2 – Information Structures
- *2.1. Introduction
- *2.2. Linear Lists
- **2.2.1. Stacks, Queues, and Deques
- **2.2.2. Sequential Allocation
- **2.2.3. Linked Allocation
- **2.2.4. Circular Lists
- **2.2.5. Doubly Linked Lists
- **2.2.6. Arrays and Orthogonal Lists
- *2.3. Trees
- **2.3.1. Traversing Binary Trees
- **2.3.2. Binary Tree Representation of Trees
- **2.3.3. Other Representations of Trees
- **2.3.4. Basic Mathematical Properties of Trees
- ***2.3.4.1. Free trees
- ***2.3.4.2. Oriented trees
- ***2.3.4.3. The "infinity lemma"
- ***2.3.4.4. Enumeration of trees
- ***2.3.4.5. Path length
- ***2.3.4.6. History and bibliography
- **2.3.5. Lists and Garbage Collection
- *2.4. Multilinked Structures
- *2.5. Dynamic Storage Allocation
- *2.6. History and Bibliography
Volume 2 – Seminumerical Algorithms
- Chapter 3 – Random Numbers
- *3.1. Introduction
- *3.2. Generating Uniform Random Numbers
- **3.2.1. The Linear Congruential Method
- ***3.2.1.1. Choice of modulus
- ***3.2.1.2. Choice of multiplier
- ***3.2.1.3. Potency
- **3.2.2. Other Methods
- *3.3. Statistical Tests
- **3.3.1. General Test Procedures for Studying Random Data
- **3.3.2. Empirical Tests
- **3.3.3. Theoretical Tests
- **3.3.4. The Spectral Test
- *3.4. Other Types of Random Quantities
- **3.4.1. Numerical Distributions
- **3.4.2. Random Sampling and Shuffling
- *3.5. What Is a Random Sequence?
- *3.6. Summary
- Chapter 4 – Arithmetic
- *4.1. Positional Number Systems
- *4.2. Floating Point Arithmetic
- **4.2.1. Single-Precision Calculations
- **4.2.2. Accuracy of Floating Point Arithmetic
- **4.2.3. Double-Precision Calculations
- **4.2.4. Distribution of Floating Point Numbers
- *4.3. Multiple Precision Arithmetic
- **4.3.1. The Classical Algorithms
- **4.3.2. Modular Arithmetic
- **4.3.3. How Fast Can We Multiply?
- *4.4. Radix Conversion
- *4.5. Rational Arithmetic
- **4.5.1. Fractions
- **4.5.2. The Greatest Common Divisor
- **4.5.3. Analysis of Euclid's Algorithm
- **4.5.4. Factoring into Primes
- *4.6. Polynomial Arithmetic
- **4.6.1. Division of Polynomials
- **4.6.2. Factorization of Polynomials
- **4.6.3. Evaluation of Powers
- **4.6.4. Evaluation of Polynomials
- *4.7. Manipulation of Power Series
Volume 3 – Sorting and Searching
- Chapter 5 – Sorting
- *5.1. Combinatorial Properties of Permutations
- **5.1.1. Inversions
- **5.1.2. Permutations of a Multiset
- **5.1.3. Runs
- **5.1.4. Tableaux and Involutions
- *5.2. Internal sorting
- **5.2.1. Sorting by Insertion
- **5.2.2. Sorting by Exchanging
- **5.2.3. Sorting by Selection
- **5.2.4. Sorting by Merging
- **5.2.5. Sorting by Distribution
- *5.3. Optimum Sorting
- **5.3.1. Minimum-Comparison Sorting
- **5.3.2. Minimum-Comparison Merging
- **5.3.3. Minimum-Comparison Selection
- **5.3.4. Networks for Sorting
- *5.4. External Sorting
- **5.4.1. Multiway Merging and Replacement Selection
- **5.4.2. The Polyphase Merge
- **5.4.3. The Cascade Merge
- **5.4.4. Reading Tape Backwards
- **5.4.5. The Oscillating Sort
- **5.4.6. Practical Considerations for Tape Merging
- **5.4.7. External Radix Sorting
- **5.4.8. Two-Tape Sorting
- **5.4.9. Disks and Drums
- *5.5. Summary, History, and Bibliography
- Chapter 6 – Searching
- *6.1. Sequential Searching
- *6.2. Searching by Comparison of Keys
- **6.2.1. Searching an Ordered Table
- **6.2.2. Binary Tree Searching
- **6.2.3. Balanced Trees
- **6.2.4. Multiway Trees
- *6.3. Digital Searching
- *6.4. Hashing
- *6.5. Retrieval on Secondary Keys
Volume 4A – Combinatorial Algorithms, Part 1
- Chapter 7 – Combinatorial Searching
- *7.1. Zeros and Ones
- **7.1.1. Boolean Basics
- **7.1.2. Boolean Evaluation
- **7.1.3. Bitwise Tricks and Techniques
- **7.1.4. Binary Decision Diagrams
- *7.2. Generating All Possibilities
- **7.2.1. Generating Basic Combinatorial Patterns
- ***7.2.1.1. Generating all n-tuples
- ***7.2.1.2. Generating all permutations
- ***7.2.1.3. Generating all combinations
- ***7.2.1.4. Generating all partitions
- ***7.2.1.5. Generating all set partitions
- ***7.2.1.6. Generating all trees
- ***7.2.1.7. History and further references
Planned
Volume 4B, 4C, 4D – Combinatorial Algorithms
- Chapter 7 – Combinatorial Searching
- *7.2. Generating all possibilities
- **7.2.2. Backtrack programming
- ***7.2.2.1. Dancing links
- ***7.2.2.2. Satisfiability
- ***7.2.2.3. Constraint satisfaction
- ***7.2.2.4. Hamiltonian paths
- ***7.2.2.5. Cliques
- ***7.2.2.6. Covers
- ***7.2.2.7. Squares
- ***7.2.2.8. A potpourri of puzzles
- ***7.2.2.9. Estimating backtrack costs
- **7.2.3. Generating inequivalent patterns
- *7.3. Shortest paths
- *7.4. Graph algorithms
- **7.4.1. Components and traversal
- **7.4.2. Special classes of graphs
- **7.4.3. Expander graphs
- **7.4.4. Random graphs
- *7.5. Network algorithms
- **7.5.1. Distinct representatives
- **7.5.2. The assignment problem
- **7.5.3. Network flows
- **7.5.4. Optimum subtrees
- **7.5.5. Optimum matching
- **7.5.6. Optimum orderings
- *7.6. Independence theory
- **7.6.1. Independence structures
- **7.6.2. Efficient matroid algorithms
- *7.7. Discrete dynamic programming
- *7.8. Branch-and-bound techniques
- *7.9. Herculean tasks
- *7.10. Near-optimization
- Chapter 8 – Recursion
Volume 5 – Syntactic Algorithms
- Chapter 9 – Lexical scanning
- Chapter 10 – Parsing techniques
Volume 6 – The Theory of Context-free Languages
Volume 7 – Compiler Techniques
English editions
Current editions
These are the current editions in order by volume number:- The Art of Computer Programming, Volumes 1-4A Boxed Set. Third Edition, 3168pp.
- * Volume 1: Fundamental Algorithms. Third Edition, xx+650pp.. Errata: , . Addenda: .
- * Volume 2: Seminumerical Algorithms. Third Edition, xiv+762pp.. Errata: , . Addenda: .
- * Volume 3: Sorting and Searching. Second Edition, xiv+780pp.+foldout.. Errata: , . Addenda: .
- * Volume 4A: Combinatorial Algorithms, Part 1. First Edition, xv+883pp.. Errata: .
- Volume 1, Fascicle 1: MMIX – A RISC Computer for the New Millennium. . Errata:
- Volume 4, Fascicle 5: Mathematical Preliminaries Redux; Backtracking; Dancing Links. xiii+382pp,. Errata:
- Volume 4, Fascicle 6: Satisfiability. xiii+310pp,. Errata:
Previous editions
Complete volumes
These volumes were superseded by newer editions and are in order by date.- Volume 1: Fundamental Algorithms. First edition, 1968, xxi+634pp,.
- Volume 2: Seminumerical Algorithms. First edition, 1969, xi+624pp,.
- Volume 3: Sorting and Searching. First edition, 1973, xi+723pp+foldout,. Errata: .
- Volume 1: Fundamental Algorithms. Second edition, 1973, xxi+634pp,. Errata: .
- Volume 2: Seminumerical Algorithms. Second edition, 1981, xiii+ 688pp,. Errata: .
- The Art of Computer Programming, Volumes 1-3 Boxed Set. Second Edition, pp.
Fascicles
- Volume 4, Fascicle 0: Introduction to Combinatorial Algorithms and Boolean Functions. vi+240pp,. Errata: .
- Volume 4, Fascicle 1: Bitwise Tricks & Techniques; Binary Decision Diagrams. viii+260pp,. Errata: .
- Volume 4, Fascicle 2: Generating All Tuples and Permutations. v+127pp,. Errata: .
- Volume 4, Fascicle 3: Generating All Combinations and Partitions. vi+150pp,. Errata: .
- Volume 4, Fascicle 4: Generating All Trees; History of Combinatorial Generation. vi+120pp,. Errata: .
- Volume 4, Fascicle 5: Mathematical Preliminaries Redux; Backtracking; Dancing Links. xiii+382pp,. Errata:
- Volume 4, Fascicle 6: Satisfiability. xiii+310pp,. Errata:
Pre-fascicles
Volume 4 pre-fascicle 6A was revised and published as fascicle 6.
- '
- '