Tellurium copper


Tellurium copper is an alloy of copper and tellurium. Tellurium improves machinability of copper.

Overview

Tellurium is usually added to copper to improve machinability. ASTM specification B301 has 0.5% tellurium; at concentrations of up to 0.75% machinability is improved whilst electrical conductivity and hot working behavior is maintained. Mechanical properties are similar to tough pitch copper, whilst machinability is similar to brass - the alloy's hardnesses are increased by precipitation of copper telluride.
Tellurium copper is not suited to welding though can be welded with gas shielded arc welding or resistance welding; it can be readily soft soldered, silver soldered, or brazed.
Tellurium copper can be used as the electrode in electrical discharge machining - the alloy is used to replace copper when grinding wheel loading occurs during fine finishing of the electrode - the alloy retains the properties of copper in the EDM process.

Phase diagram

Copper forms tellurides. These include Cu4Te, Cu2Te, and CuTe. A eutectic forms at 71% Te,. Between 4.3 to 30% Te there is stratification between Cu and Cu2Te.