An exit pupil at infinity makes the lens image-space telecentric. Such lenses are used with image sensors that do not tolerate a wide range of angles of incidence. For example, a three-CCD color beamsplitter prism assembly works best with a telecentric lens, and many digital image sensors have a minimum of colorcrosstalk and shading problems when used with telecentric lenses. If both pupils are at infinity, the lens is double telecentric.
Object-space telecentric lenses
Non-telecentric lenses exhibit varying magnification for objects at different distances from the lens. Most lenses are entocentric—objects further away have lower magnification. For pericentric lenses, objects further away have higher magnification. The variation of magnification with distance causes several problems for machine vision and other applications:
Some features or objects may be hidden by objects that are closer to the lens.
The apparent shape of objects varies with distance from the center of the field of view. Objects appearing close to the edges are viewed from an angle, while objects near the centre of the FOV are viewed frontally.
Telecentric lenses, on the other hand, provide an orthographic projection, providing the same magnification at all distances. An object that is too close or too far from the lens may still be out of focus, but the resulting blurry image will have the same size as the correctly focused image would. Because their images have constant magnification and geometry, telecentric lenses are used for metrology applications, when a machine vision system must determine the precise size of objects independently from their position within the FOV and even when their distance is affected by some degree of unknown variations. These lenses are also commonly used in optical lithography for forming patterns in semiconductor chips. Object-space telecentric lenses have an entrance pupil infinitely far behind the lens; that is, if one looks in the front of the lens, the image of the aperture is very far away. Telecentric lenses tend to be larger, heavier, and more expensive than normal lenses of similar focal length and f-number. This is partly due to the extra components needed to achieve telecentricity, and partly because the object or image lens elements of an object or image-space telecentric lens must be at least as large as the largest object to be photographed or image to be formed., these lenses can range in cost from hundreds to thousands of US dollars or euros, depending on quality. Because of their intended applications, telecentric lenses often have higher resolution and transmit more light than normal photographic lenses. In order to optimize the telecentric effect, these lenses are often used in conjunction with telecentric illuminators, which produce a parallel light flow, often from LED sources.
Image-space telecentric lenses
An image-space telecentric lens produces images of the same size regardless of the distance between the lens and the film or image sensor. This allows the lens to be focused to different distances without changing the size of the image. Image-space telecentric lenses have an exit pupil infinitely far in front of the lens; that is, if one looks in the back of the lens, the image of the aperture is very far away. At the film or image sensor, all of the chief rays from these lenses hit "straight on", or at zero angle of incidence. This property minimizes any angle-of-incidence dependence of the sensor, or of any beam-splitter prism assembly behind the lens, such as a color separation prism in a three-CCD camera. Many lenses that have been specially optimized for digital SLR cameras are nearly telecentric on the image side, to avoid the vignetting and color crosstalk that occur in color filter array-based digital image sensors with oblique incident rays. The Four Thirds System uses this approach. Since the ray cones approaching the detector surface have the same angle of incidence and angular subtense everywhere in the image plane, the image is evenly illuminated. This feature is commonly used in photography and is very useful for radiometric and color measurement applications, where one would need the irradiance to be the same regardless of the field position. Lenses that are double-telecentric have magnification that is more precisely constant than those that are only object-side telecentric, because the principal ray intercept position on the detector does not change. This property allows precise measurement of objects regardless of position.
