The prototype of the Honker was created in 1984 in the Fabryka Samochodów Rolniczych or FSR in Poznań. Based on the earlier design of the Tarpan car, it was to replace it as the basic Polish-made pick-up truck in public service. However, it was not until 1988 that the serial production was started. The car was produced in two variants:
Tarpan Honker 4012, a typical hard top with room for up to 10 passengers
Tarpan Honker 4022, a pick-up truck with room for 2 passengers
Soon after production started, the FSR started the construction of a new, slightly shorter and more narrow version, which received the designation of Honker 4032. Although the prototype never entered serial production, it was the first car to be known solely as Honker, without any indication of its relation to the earlier Tarpan. In late 1996 the design was bought by the Daewoo Motor Polska company, who decided to continue the production in Lublin. The interior design was slightly modified and the car received the new designation of Daewoo Honker 2324. The car did not differ much from the original version and was available in the same set of options. There were plans for creation of a modernized Daewoo Honker II with either 4x2 or 4x4 drive, but they were called off and instead the factory only modified the external design and continued the production under a new name of Daewoo Honker 2000. After the bankruptcy of Daewoo, the license was inherited by two companies. Andoria-Mot continued the production in small quantities from 2002–2003, and in 2003 created two modernized versions, both in a hard-top pick-up combination. Intrall Polska, made the Honker from Jan. 2004-Spring 2007. In 2004, Intrall created another model, the off-road carHonker MAX. In addition, in 2004 the Honker saw yet another modification: an armored and mine-protected heavier version Honker Skorpion 3 was created specifically for the Polish Army forces in Iraq. In 2016, the company producing the Honker,, filed for bankruptcy, ending the production of the vehicle.
Variants
Honker trucks were produced in the hard-top versions, with a container carrier and as a pick-up. Honkers produced up to 1992 used M20 gasoline engines shared with Żuk and Nysa trucks. In later models, M20 engine was replaced with gasoline engines from the FSO Polonez car, Ivecodiesel engines, and from 1997 onwards used the turbo engines Andoria 4CT90 and later 4CTi90. The truck had a 3-door body, based on a rigid frame bridges driving the leaf springs.
Production
Production models of Honker was low, reaching a maximum level of a few hundred vehicles. In Poznan in 1992, FSR built 450 autos in 1992; 314 autos in 1994; and 288 autos in 1995. FSR production stopped in early 1996. In mid 1996 Daewoo bought the rights and established Daewoo Motor Poland Sp. Ltd. to produce vehicles. Production resumed in autumn 1996 trials for the assembly of Honkers in Lublin. In both factories, they built only around 20 autos. Yearly production were as follows:
1997 they built 155 autos;
1998 - 232 autos;
1999 - about 350 autos;
2000 - about 200 autos;
2001 - about 30-40 autos;
2002 - 140 autos;
2003 - 278 autos;
2004 - about 490 autos;
2005 - 177 autos;
2006 - 245 autos;
2007 - 35 autos.
In the spring of 2007, production was again suspended. In 2008, the Ukrainian company DP Naftogazbud Polior was to begin building the Honker again, but never did. In 2009, Syndyk DMP, the owner of the rights to Honker, sold the company to DZT Tymińscy, which then restarted production of the Honker.