Supplicant (computer)


In computer networking, a supplicant is an entity at one end of a point-to-point LAN segment that seeks to be authenticated by an authenticator attached to the other end of that link. The IEEE 802.1X standard uses the term "supplicant" to refer either to hardware or to software. In practice, a supplicant is a software application installed on an end-user's computer. The user invokes the supplicant and submits credentials to connect the computer to a secure network. If the authentication succeeds, the authenticator typically allows the computer to connect to the network.
port should be set in multi-session mode.
A supplicant, in some contexts, refers to a user or to a client in a network environment seeking to access network resources secured by the IEEE 802.1X authentication mechanism. But saying "user" or "client" over-generalizes; in reality, the interaction takes place through a personal computer, an Internet protocol phone, or similar network device. Each of these must run supplicant software that initiates or reacts to IEEE 802.1X authentication requests for association.

Overview

Businesses, campuses, governments and all other social entities across-the-board in need of security may resort to the use of IEEE 802.1X authentication to regulate users access to their corresponding network infrastructure. And to enable this, client devices need to meet supplicant definition in order to gain access. In businesses, for example, it is very common that employees will receive their new computer with all the necessary settings appropriately set for IEEE 802.1X authentication, in particular when connecting wirelessly to the network.

Access

For a supplicant capable device to gain access to the secured resources on a network, some preconditions should be observed and a context that will make this feasible. The network to which the supplicant needs to interact with must have a RADIUS Server also known as Authentication Server, an Authenticator and optionally a Dynamic Host Configuration Protocol server if automatic Internet protocol address assignment is sought after, and in certain configurations, an active directory domain controller. This is particularly true in Microsoft environment especially when using Internet Authentication Service or Network Policy Server as the software running on the Authentication Server.

Supplicant list

Supplicants include but are not limited to:
One aspect of reality a user needs to understand and, more likely comply with the network administrator is the use of user name and password, or a Media Access Control Address as the minimum that will be required for account setup.
On a Windows machine, taking an example of Windows 8, one should make sure to enable one's client to act as a supplicant by going to the Network Properties of the Network Interface Card, and from the Authentication tab, "Enable IEEE 802.1X authentication" need to be checked. Similar steps need to be taken on other network devices that provide support for IEEE 802.1X authentication. This is the most important single step a user will need to make in order for one's network device to act as a supplicant.