A standard cubic foot defines an amount of gas contained in a volume of one cubic foot at standard temperature and pressure. This standard unit of molecular quantity for gases can be used with the ideal gas law to compute the quantity per unit of volume for other pressures and temperatures. In spite of the label "standard", there is a variety of definitions, mainly depending on the type of gas. Since, for a given volume, the quantity is proportional to the pressure and temperature, each definition fixes base values for pressure and temperature.
Natural gas
Since natural gas is an imprecise mix of various molecular species, chiefly methane but with varying proportions of other gases, a standard cubic foot of natural gas does not represent a precise unit of mass, but a molecular quantity, expressed in moles. For petroleum gases, the standard cubic foot is defined as one cubic foot of gas at and at normal sea levelair pressure. The pressure definition differs between sources, but are all close to normal sea level air pressure.
A pressure. This value is very close to 30 inches of mercury. Gives 1.1981 moles per scf or 0.002641 pound moles per scf.
The standard cubic meter of gas is used in the context of the SI system. It similarly defined as the quantity of gas contained in a cubic meter at a temperature of and a pressure of. Converting volume units between the standard cubic foot and the standard cubic meter is not exact, as the base temperature and pressure used are different, but for most practical situations the difference can be ignored. Comparing the same volume between the and 101.325 kPa standard cubic meter versus the and standard cubic foot gives an error of 0.04%. A standard cubic foot in the US Customary System is approximately equivalent to 0.02833 standard cubic meters in the SI system. In the natural gas industry, where quantities are often expressed in standard cubic feet, large multiples of standard cubic feet are generally not expressed with metric prefixes, but rather with prefixes based on roman numerals, where the s for "standard" is often omitted. Common units of gas volumes include ccf, Mcf, and MMcf. The M refers to the Roman numeral for thousand, while two M's represent one thousand thousands, or one million. Bcf, Tcf, Qcf, etc., are also used.
The National Conference on Weights and Measures, a US-based non-profit organization working in cooperation with the US National Institute of Standards and Technology, has defined a set of standards in a regulation entitled the "Uniform Regulation for the Method of Sale of Commodities". This regulation defines a standard cubic foot, for compressed or liquefied gases in refillable cylinders other than LPG by, "A standard cubic foot of gas is defined as a cubic foot at a temperature of 21 °C and a pressure of 101.325 kilopascals ".
Industrial gases
Yet other definitions are in use for industrial gas, where, in the US, a standard cubic foot for industrial gas use is defined at and 14.696 psia, while in Canada, a standard cubic meter for industrial gas use is defined at and 101.325 kPa.
Converting actual volumes to standard volumes
An actual volume can be converted to a standard volume using the following equation: Where, Example: How many standard cubic feet are in 1 cubic foot of gas at 80 °F and 50 psig?
