Type JT tenders were built between 1935 and 1945 by Berliner Maschinenbau, Beyer, Peacock and Company, Henschel and Son, North British Locomotive Company and Robert Stephenson and Hawthorns. In 1935, the South African Railways placed six Class 16E express passenger steam locomotives in service, numbered in the range from 854 to 859. The engines and tenders were built by Henschel to the design of A.G. Watson, Chief Mechanical Engineer of the SAR at the time, and were initially placed in service at Kimberley to work named trains like the Union Limited and the Union Express southwards to Beaufort West and northwards to Johannesburg respectively. In the same year, the first twenty Class 15E locomotives entered service, built by Robert Stephenson and Hawthorns, numbered in the range from 2858 to 2877 and nicknamed Bongol. The Type JT first entered service as tenders to these two locomotive classes. Between 1935 and 1946, more entered service as tenders to the Classes 15E and 15F.
Characteristics
The original Type JT tenders were arranged for manual stoking. On tenders which were delivered between 1939 and 1945 with Class 15F numbers 2923 to 3056, provision was made in the design to convert them to mechanical stoking later. These were built by North British and Beyer, Peacock to the design and specifications of W.A.J. Day, who succeeded A.G. Watson as CME in 1936. A mechanical stoker was later tested on no. 2923, before the remaining locomotives of this group were all equipped with mechanical stokers by the late 1940s. The tender rode on four-wheeled bogies and was virtually identical to the subsequent Type ET tender which was built with a mechanical stoker. Like the Type ET, it also had a coal capacity and a maximum axle load of, but a larger water capacity of. Its empty weight was less due to the absence of mechanical stoking equipment. These appear to have been the only differences between the Types JT and ET tenders.
Locomotives
Three locomotive classes, built by five manufacturers, were delivered new with Type JT tenders which were numbered for their engines in the number ranges as shown. An oval number plate, bearing the engine number and often also the tender type, was attached to the rear end of the tender.
1935: Class 16E, numbers 854 to 859.
1935-1937: Class 15E, numbers 2858 to 2901.
1938-1945: Class 15F, numbers 2902 to 3056.
Classification letters
Since many tender types are interchangeable between different locomotive classes and types, a tender classification system was adopted by the SAR. The first letter of the tender type indicates the classes of engines to which it can be coupled. The "J_" tenders could be used with the locomotive classes as shown.
The second letter indicates the tender's water capacity. The "_T" tenders had a capacity of between. A number, when added after the letter code, indicates differences between similar tender types, such as function, wheelbase or coal bunker capacity.
