In summer 1912, the British pioneer aviatorThomas Sopwith, also a keen yachtman and power-boat racer, started design of a flying boat, to be called the "Bat Boat" after a flying machine in Rudyard Kipling's short story With the Night Mail, to combine his interests in aviation and the sea. The resultant design was a biplane, powered by a Gnome rotary engine in a tractor configuration. The hull, which was made of Consuta, i. was built by S. E. Saunders, the shipbuilders based at Cowes on the Isle of Wight who were experienced in the construction of power-boats, while the wings, of about 30 ft span, were built at Sopwith's flying school at Brooklands. Although the aircraft was approaching completion by August 1912, it was abandoned and was never flown. Sopwith then produced a completely new design of flying boat, still called "Bat-boat", this time a pusher configurationtwo-bay biplane powered by a 90 hp Austro-Daimler engine. The hull, which was again built by Saunders of Consuta, accommodated two people side-by-side in an open cockpit in line with the leading edge of the wings, and had a curved, vee-profile planing bottom. The wings, of 41 ft span, were unstaggered, with lateral control by wing warping. The tail, which had no fixed fin, was carried on tailbooms connected to the wings, while an additional forward elevator was fitted to the front of the hull to supplement the normal elevator fitted to the tail. The new Bat-boat was assembled at Sopwith's new factory at Kingston upon Thames early in 1913, and was displayed at the International Aero Show at Olympia, London in February that year. The Bat-Boat was sent from Olympia to Cowes for tests in March, with both Thomas Sopwith and Harry Hawker attempting, with little success, to get the Bat Boat airborne. The Bat Boat was wrecked by a storm. A second Bat Boat soon followed, omitting the forward elevator, while a third aircraft was built using components of the first prototype, but with a 100 hp Green engine and an amphibious undercarriage. Thus equipped, the third Bat Boat won the £500 Mortimer Singer prize for the first all-British amphibious aircraft on 8 July 1913. In 1914, Sopwith laid down a second pair of Bat Boats. These two aircraft had a similar layout to the first three aircraft, but were larger, having a span of 55 ft, and were powered by 200 hp Salmson engines. The first of these pair was displayed at the Olympia Air Show in March 1914. Also in March, Sopwith commenced building a final Bat Boat to compete in the 1914 Daily Mail Circuit of Britain race for seaplanes. This was similar to the Salmson powered Bat Boat exhibited at Olympia, but was powered by a 225 hp Sunbeam engine. However, the outbreak of the First World War led to cancellation of the Circuit of Britain race.
Operational history
The second Bat-Boat was purchased by the Admiralty and delivered to Calshot Naval Air Station in June 1913, being allocated the serial number38. It was badly damaged, however, sinking at its moorings on 23 August 1913, having to be rebuilt again by Sopwith's. After serving at several Naval Air Stations, it was destroyed in a gale at Scapa Flow, Orkney, on 21 November 1914. The third Bat Boat was also purchased by the RNAS in February 1914, and given the serial number 118. It was used for a night flying demonstration at the Fleet Review in July 1914, and for bomb dropping trials at Calshot, being scrapped in February 1915 when it was found that its hull was badly rotted. The first of the two Salmson powered Bat Boats was purchased by the German Navy Air Service, being used as a trainer at Kiel. The second Salmson powered Bat Boat was, after testing at Calshot of radio equipment, sold to Greece in July. The Circuit of Britain machine was subject to compulsory purchase by the RNAS following the outbreak of war. While it suffered engine problems, it remained in use until April 1915.
Variants
;Bat Boat Type 1 ;Bat Boat Type 1A ;Bat Boat Type 2 ;Bat Boat Type 2
