Smith & Wesson


Smith & Wesson is an American manufacturer of firearms, ammunition and restraints. The corporate headquarters is in Springfield, Massachusetts.
Smith & Wesson was founded by Horace Smith and Daniel B. Wesson as the "Smith & Wesson Revolver Company" in 1856 after their previous company, also called the "Smith & Wesson Company" and later renamed as "Volcanic Repeating Arms", was sold to Oliver Winchester and became the Winchester Repeating Arms Company. The modern Smith & Wesson had been previously owned by Bangor Punta and Tomkins plc before being acquired by Saf-T-Hammer Corporation in 2001. Smith & Wesson has been a unit of American Outdoor Brands Corporation since 2016, after corporate restructuring in the 21st century.

History

Volcanic Repeating Arms

and Daniel B. Wesson founded the Smith & Wesson Company in Norwich, Connecticut in 1852 to develop the Volcanic rifle. Smith developed a new Volcanic Cartridge, which he patented in 1854. The Smith & Wesson Company was renamed Volcanic Repeating Arms in 1855 and was purchased by Oliver Winchester. Smith left the company and returned to his native Springfield, Massachusetts, while Wesson stayed on as plant manager with Volcanic Repeating Arms for 8 months. Volcanic Repeating Arms was insolvent in late 1856, after which it was reorganized as the New Haven Arms Company in April 1857 and eventually as the Winchester Repeating Arms Company by 1866.

Smith & Wesson Revolver Company

As Samuel Colt's patent on the revolver was set to expire in 1856, Wesson began developing a prototype for a cartridge revolver. His research pointed out that a former Colt employee named Rollin White held the patent for a "bored-through" cylinder, a component he would need for his invention. Wesson reconnected with Smith and the two partners approached White to manufacture a newly designed revolver-and-cartridge combination. After Wesson left Volcanic Repeating Arms in 1856, he rejoined Smith to form the Smith & Wesson Revolver Company which would become the modern Smith & Wesson company.
Rather than make White a partner in their company, Smith and Wesson paid him a royalty of $0.25 on every revolver that they made. It would become White's responsibility to defend his patent in any court cases which eventually led to his financial ruin, but was very advantageous for the new Smith & Wesson Company.

19th century

Smith & Wesson's revolvers came into popular demand with the outbreak of the American Civil War as soldiers from all ranks on both sides of the conflict made private purchases of the revolvers for self-defence.
The orders for the Smith & Wesson Model 1 revolver outpaced the factory's production capabilities. In 1860 demand volume exceeded the production capacity so Smith & Wesson expanded into a new facility and began experimenting with a new cartridge design more suitable than the.22 Short that it had been using.
At the same time, the company's design was being infringed upon by other manufacturers which led to numerous lawsuits filed by Rollin White. In many of these instances part of the restitution came in the form of the offender being forced to stamp "Manufactured for Smith & Wesson" on the revolvers in question.
White's vigorous defence of his patent caused a problem for arms makers in the United States at the time as they could not manufacture cartridge revolvers. At the end of the war, the U.S. Government charged White with causing the retardation of arms development in America.
Demand for revolvers declined at the close of the Civil War so Smith & Wesson focused on the development of arms suitable for use on the American frontier. In 1870 the company switched focus from pocket-sized revolvers to a large frame revolver in heavier calibres. This new design, known as the Smith & Wesson Model 3, was adopted by the US Army as the first cartridge-firing revolver in US service.
In 1899 Smith & Wesson introduced its most widely used revolver, the.38 Military & Police. With over 6 million produced, it became the standard sidearm of American police officers for much of the 20th century. An additional 1 million of these guns were made for the US Military during World War II.

20th century

The post-war periods in the 20th century were times of great innovation for the company. In 1935 Smith & Wesson released the Smith & Wesson Model 27 which was the first revolver chambered for.357 Magnum. It was designed as a more powerful handgun for law enforcement officers. The Model 27 started the "Magnum Era" of handguns. The high point was in 1955 when the company created the Smith & Wesson Model 29 in.44 Magnum. Two decades later the Dirty Harry movies made this gun a cultural icon.
In 1965, the Wesson family sold its controlling interest in Smith & Wesson to Bangor Punta, a large American conglomerate. Over the next decade, Bangor Punta diversified the company's civilian sales to include related gun products as well as offering additional police equipment. By the late 1970s these profitable moves made Smith & Wesson "the envy of the industry" according to Business Week.
Despite all of these advantages, however, Smith & Wesson's market share began to decline in the 1980s. As the war on drugs intensified in the United States, police departments all across the country replaced their Smith & Wesson revolvers with European semiautomatics. From 1982 to 1986 profits at the company declined by 41 percent
In June 1987 Tomkins plc paid $112.5 million to purchase Smith & Wesson. Tomkins modernized the production equipment and instituted additional testing which significantly increased product quality. However new gun sales in the United States lagged in the 1990s, some of which was attributed to the Federal Assault Weapons Ban of 1994. Also, there were numerous city and state lawsuits against Smith & Wesson. After the success of the Tobacco Master Settlement Agreement, municipalities thought they might be able to succeed through tort law against the gun industry as well.

21st century

Clinton agreement

On March 17, 2000, Smith & Wesson made an agreement with U.S. President Bill Clinton under which it would implement changes in the design and distribution of its firearms in return for "preferred buying program" to offset the loss of revenue as a result of the anticipated boycott. The agreement stated all authorized dealers and distributors of Smith & Wesson's products had to abide by a "code of conduct" to eliminate the sale of firearms to prohibited persons, and dealers had to agree to not allow children under 18 access to gun shops or sections of stores that contained firearms.
After an organized campaign by the NRA and NSSF over the issue of smart guns, thousands of retailers and tens of thousands of firearms consumers boycotted Smith & Wesson. CEO Ed Shultz, who negotiated the deal, was forced out in September of that year. By December 2000, the company's stock price was 19 cents per share. Smith & Wesson dropped its smart gun plans after nearly being driven out of business.

Acquisition

On May 11, 2001, Saf-T-Hammer Corporation acquired Smith & Wesson Corp. from Tomkins plc for US$15 million, a fraction of the US$112 million originally paid by Tomkins. Saf-T-Hammer assumed US$30 million in debt, bringing the total purchase price to US$45 million. Saf-T-Hammer, a manufacturer of firearms locks and other safety products, purchased the company with the intention of incorporating its line of security products into all Smith & Wesson firearms in compliance with the 2000 agreement.
The acquisition of Smith & Wesson was chiefly brokered by Saf-T-Hammer President Bob Scott, who had left Smith & Wesson in 1999 because of a disagreement with Tomkins’ policies. After the purchase, Scott became the president of Smith & Wesson to guide the 157-year-old company back to its former standing in the market.
On February 15, 2002, the name of the newly formed entity was changed to Smith & Wesson Holding Corporation.

Post-acquisition

In 2006 Smith & Wesson refocused its marketing on big box retailers, according to Smith & Wesson CEO Mike Golden in a 2008 conference call with investors.
On November 7, 2016, Smith & Wesson Holding Corporation changed its name to American Outdoor Brands Corporation.
In 2017 Smith & Wesson saw a severe contraction in its sales as units shipped to distributors and retailers declined 38.3%. The company was forced to lay off one-fourth of its manufacturing workforce.
The company has come under increased scrutiny due to the use of its firearms in mass shootings such as the 2018 Stoneman Douglas High School shooting, in which 19-year-old Nikolas Jacob Cruz used a Smith & Wesson AR-15 style rifle, the semi-automatic M&P15. The same weapon was used in the 2015 San Bernardino attack and the 2012 Aurora, Colorado shooting.

Products

Cartridges

Smith & Wesson has produced revolvers over the years in several standard frame sizes. M refers to the small early Ladysmith frame, I to the small.32 frame, J to the small.38 frame, K to the medium.38 frame, L to the medium large.38 and.44 Magnum frame, and N to the largest.44 Magnum type frame. In 2003, the even larger X frame was introduced for the.500 S&W Magnum.
;I-frame models
;J-frame models
;K-frame models
;L-frame models
;M-frame models
;N-frame models
;X-frame models
;Z-frame models
Most Smith & Wesson revolvers have been equipped with an internal locking mechanism since the acquisition by Saf-T-Hammer. The mechanism is relatively unobtrusive, is activated with a special key, and renders the firearm inoperable. While the lock can simply be left disengaged, most gun enthusiasts prefer "pre-lock" guns.

Semi-automatic pistols

In 1953 the U.S. Army was looking for a pistol to replace the Colt 1911A1. To obtain a bid from the U.S. Government, Smith & Wesson began working on a design similar to the German Walther P38. A year later the Army dropped its search and Smith & Wesson introduced its pistol to the civilian shooting market as the Model 39.
The Model 39 would come to be known as a first-generation pistol. Since the Model 39 debuted, Smith & Wesson has continuously developed this design into its third-generation pistols now on the market. The first-generation models use a 2-digit model number, the second generation use 3 digits, and third-generation models use 4 digits.
Along with the myriad smaller configurations, the mid-sized 4516, 457, the Chiefs Special CS45, and the decocker equipped, 4546, 4566 and 4576, and the 45 TSW, the 4553, still being issued to the West Virginia State Troopers.
For many of the second-generation models, the first digit identified the material used in the frame; thus the first digit of 4 indicated an alloy, the first digit of 5 indicated blued steel, and the first digit of 6 indicated stainless steel. For most of the third-generation models, the first two digits identified the calibre, the last two digits were for the action style and the material, respectively. Action style numbers were typically 0 for the standard double/single-action and 4 for double-action-only. Material numbers were commonly 3 for aluminium, 4 for blued steel, and 6 for stainless steel.

Sigma series

Smith & Wesson introduced the Sigma series of recoil-operated, locked-breech semi-auto pistols in 1994 with the Sigma SW40F, followed by the Sigma SW9F 9 mm, which included a 17-shot magazine. Glock initiated a patent infringement lawsuit against Smith & Wesson. The latter paid an undisclosed amount to settle the case and for the right to continue producing models in the Sigma line. The gun frame is manufactured from polymer, while the slide and barrel use either stainless steel or carbon steel. In 1996, Smith & Wesson updated the Sigma by adding a compact model with a shortened barrel and again, in 1999, modified the series by changing the grip by adding checkering and adding an integral accessory rail for lights and laser targeting devices.
S&W reached an agreement with Walther to produce variations of the P99 line of pistols. Branded as the SW99, the pistol is available in several calibres, including 9 mm,.40 S&W, and.45 ACP, and in both full size and compact variations. Under the terms of the agreement, Walther produced the frames, and Smith & Wesson produced the slide and barrel. The pistol has several cosmetic differences from the original Walther design and strongly resembles a hybrid between the P99 and the Sigma series.

M&P Series

In 2005, Smith & Wesson debuted a new polymer-framed pistol intended for the law enforcement market. Dubbed the M&P, its name was meant to evoke S&W's history as the firearm of choice for law enforcement agencies through its previous lineup of M&P revolvers. The M&P is a completely new design with no parts interchangeable with any other pistol including the Sigma. The new design not only looks completely different than the Sigma but feels completely different with 3 different backstraps supplied with each M&P. Many of the ergonomic study elements that had been incorporated into the Sigma and the SW99 were brought over to the M&P. The improved trigger weight and feel, and unique takedown method were meant to set the M&P apart from both the Sigma and the popular Glock pistols.
The M&P is available in 9×19mm,.40 S&W, and.357 SIG. Also, a.22 LR M&P was developed with Carl Walther and is made in Germany. A.45 ACP model was released in early 2007, after making its debut at the SHOT Show. In addition, compact versions are available in.22LR, 9×19mm,.40 S&W,.357 SIG, and.45 ACP. The.22LR Compact is made by Smith & Wesson in the United States. Subcompact versions are available in 9×19mm,.40 S&W and.45 ACP.

SD VE Series

Smith & Wesson introduced the SD VE series in 2012 in hopes of remaking and improving the cancelled Smith & Wesson SD. The SD VE design has an improved self-defence trigger and a comfortable, ergonomic, textured grip. The SD VE also features an improved stainless steel barrel and slide that the SD did not include. The Smith & Wesson SD VE is available in 9×19mm and.40 S&W calibres in either a standard-capacity version or in the low-capacity version

SW1911 Series

In 2003, Smith & Wesson introduced their variation of the classic M1911.45 ACP semi-automatic handgun, the SW1911. This firearm retains the M1911's well-known dimensions, operation, and feel while adding a variety of modern touches. Updates to the design include serration at the front of the slide for easier operation and disassembly, a high "beaver-tail" grip safety, external extractor, lighter weight hammer and trigger, as well as updated internal safeties to prevent accidental discharges if dropped. S&W 1911s are available with black finished carbon steel slides and frames or bead blasted stainless slides and frames. They are available with aluminium frames alloyed with scandium in either natural or black finishes. These updates have resulted in a firearm that is true to the M1911 design, with additions that would normally be considered "custom", with a price similar to equivalent designs from other manufacturers.
Smith & Wesson's Performance Center produces the top of the line hand fitted competition version knowns as the PC 1911. While most 1911s run around, the PC 1911 is heavier, at approximately. The full-length guide rod adds some weight, and so does the add-on magazine well.

Rifles and carbines

During the early years of WW2, Smith & Wesson manufactured batches of the Model 1940 Light Rifle under request from the British Government.
In January 2006, Smith & Wesson reentered the rifle market with its M&P15 series of rifles based on the AR-15. Unveiled at SHOT Show 2006, the rifle debuted in two varieties: the M&P15 and the M&P15T. The two are basically the same rifle, chambered in 5.56 NATO, with the T model featuring folding sights and a four-sided accessories rail. These rifles were first produced by Stag Arms but marketed under the Smith & Wesson name. Currently Smith & Wesson makes the lower receiver in-house while the barrel is supplied by Thompson/Center, a S&W company.
In May 2008, Smith & Wesson introduced its first AR-variant rifle in a caliber other than 5.56 NATO. The M&P15R is a standard AR-15 rifle chambered for the 5.45×39mm cartridge. In 2009, it released the M&P15-22, chambered for.22 Long Rifle.
Smith & Wesson manufactured a line of bolt-action rifles called the i-Bolt. These synthetic-stock rifles were available in.25-06,.270 Win, or.30-06 caliber.

Submachine gun

In 1967 Smith & Wesson produced a 9mm submachine gun, hoping to capitalize on U.S. sales of the Israeli Uzi and HK MP5. It borrowed the magazine of the Carl Gustaf M/45 submachine gun and made a similar side-folding stock. But the rest of the straight blowback weapon had no parts in common with the earlier Swedish gun. The S&W Model 76 submachine gun was made in limited numbers and was primarily used as a police weapon. Because all of them were made prior to 1986, many of them made it into civilian hands in the United States and are commonly used in submachine gun competition.

Shotguns

Smith & Wesson bought patents and tooling for a pump-action shotgun design from Noble Manufacturing Co. in 1972 and produced it as the Model 916. The guns were plagued by a variety of quality issues, including a recall due to a safety issue with barrels of the 916T version rupturing. The Model 916 was succeeded by the pump-action Model 3000 and the semi-automatic Model 1000; both were produced by Howa Machinery in Japan. However, with the sale of the company to Tomkins plc, Smith & Wesson exited the shotgun market in the mid-1980s to return to their core market of handguns.
During the 1980s, the company released the Smith & Wesson AS, an assault shotgun which had a fully automatic capability.
In November 2006, Smith & Wesson announced that it would reenter the shotgun market with two new lines of shotguns, the break-open Elite Series and the semi-automatic 1000 Series, unveiled at the 2007 SHOT Show. Both series were manufactured in Turkey. Along with the new shotguns, the company debuted the Heirloom Warranty program, a first of its kind in the firearms industry. The warranty provides both the original buyer and the buyer's chosen heir with a lifetime warranty on all Elite Series shotguns. The 1000 Series and Elite Series were both discontinued circa 2010.

Other products

Smith & Wesson is also a manufacturer of restraints. Smith & Wesson first manufactured handcuffs for the Peerless handcuff company which obtained the right to produce the first swinging-bow handcuffs patented by George A. Carney in 1912. Peerless did not have the facilities necessary for production so they contracted Smith & Wesson to manufacture the handcuffs for them. When Peerless set up its own production plant, Smith & Wesson continued to produce Peerless-type handcuffs under their own brand.
Smith & Wesson markets firearm accessories, safes, apparel, watches, collectables, knives, axes, tools, air guns, emergency light bars, and other products under its brand name.
John Wilson and Roy G. Jinks designed the Smith & Wesson model 6010 Bowie knife in 1971 and the 1973 Texas Ranger Bowie knife. Blackie Collins designed the subsequent model 6020 and 6060 Survival knife in 1974–1979. All of these limited-production and custom knives were made at the Springfield, Mass., United States factory.
In October 2002, Smith & Wesson announced it had entered into a licensing agreement with Cycle Source Group to produce a line of bicycles designed by and for law enforcement. These bicycles had custom configurations and silent hubs.
Smith & Wesson flashlights are available to the general public. They are designed and produced by PowerTech, Inc, in Collierville, Tennessee.
Smith & Wesson has a line of wood pellet grills named after various pistol cartridges, such as.22 Magnum,.38 Special,.44 Magnum,.357 Magnum, and.500 Magnum.
Smith & Wesson has entered into a licensing agreement with North Carolina-based Wellco Enterprises to design and distribute a full line of tactical law enforcement footwear.

Footnotes