Sisu R-141


Sisu R-series is a 2–3-axle lorry model series made by the Finnish heavy vehicle producer Suomen Autoteollisuus in 1970–1982. The series consists of 4×2-driven R-141 and R-148, 6×2-driven R-142, 6×4-driven R-143 and R-149, 4×4-driven R-144, 4×4+2-driven R-145 and 6×6-driven R-146. Typical applications are logging trucks, dumper trucks and long-distance transportation haulers which pull conventional and semi-trailers.
The predecessors of the series were Sisu K-141...148. R-series was replaced by the 1982 introduced Sisu SR-series.

Development

The R-series belongs to the producer's heavy duty Jyry range and it is based on the preceding models. Similar to the previous range, the R-type is equipped with a tiltable, single piece bonnet made from reinforced plastic as standard. Use of plastic is further increased in various cabin parts.
Previously, Sisu tandems were equipped with an in-house developed mechanism that lifted the rearmost axle. The solution was not very reliable and it had led to a number of warranty claims. The main domestic competitor Vanajan Autotehdas had developed an outstanding lifting tandem mechanism. SAT took over the producer when the designing work of R-series was ongoing, and adopted the mechanism to Sisus. The Vanaja type lifting tandem used in R-142 6×2 variant was the most significant new feature in the R-series.

Production

R-series was officially launched in 1970 together with forward-control M-series. Initially the range consisted 4×2-driven R-141 and R-148, R-142 with 6×2 layout and R-149 6×4. 4×4+2-driven R-145 was launched in 1971, R-143 6×4 in 1972, R-144 4×4 in 1976 and R-146 in 1978. The R-148 4×2 and R-149 6×4 differ from the similar layout models R-141 4×2 and R-143 6×4 by the engine and cabin location; the first mentioned models are with a short overhang, in the others the power unit is pushed more forward creating a long overhang, in order to optimise load distribution between the axles.
The applications include semi-trailer haulers, earthmovers, logging vehicles, flatbed haulers and tankers. Bronto Skylift used R-142 chassis for its 32-metre high reaching aerial platforms. The 6×4-driven R-143 was targeted to poor terrain conditions and closed construction sites without weight restrictions; the 4×4+2-driven R-145 was in particular for logging use on and off road conditions. The 1978 launched R-146 6×6 was designated to haul heavy flatbed trailers and it was made by combining existing components of the range.
Some units were exported: Colombian transportation company FSM & CIA bought five R-142s to haul semi-trailers with bitumen tanks.

Technical data

Engine

The initially offered power units were two variants of six-cylinder inline Leyland diesel: the naturally aspirated O.680 and its more powerful turbocharged version O.690. A third option was notorious Leyland O.801 V8, which was used on some R-141 and R-142 models, but remained uncommon and was soon taken out of selection. Rolls-Royce Eagle 265 Mk I as available as the fourth option; the same type had been used already on the preceding models and was further powered on R-series.
14-litre, 6-cylinder Cummins NTE-370-series was introduced in R-models in 1980, two years after it had entered service in M-type. The 1981 introduced R-142BEV features a 405-horsepower variant and it was the most powerful lorry produced in Northern Europe at its time.

Engine data

Transmission and chassis

Engine power is transmitted to gearbox through a clutch, which is dry single- or double plate type, or turbine clutch. A number of gearbox options were available. The 13-speed Fuller RTO91513 is suitable for highways, and 14-speed Fuller RTO9508LLB designated for on- and off-road use. Both transmissions provide top speed of 102–107 km/h, but the latter option has got 35% higher ratio with the smallest gear compared to the first variant. Also a six-speed synchronised gearbox was available. PTO is a standard feature in every gearbox option.
The driven rear axle options consisted single and double reduction options. The single reduction models are fitted with integrated two-step reduction gear. Such models are types BTR and BTK. The double reduction models with planetary gears in wheel hubs came into the selection in 1971. Such models are BTO, BTY and BTE. BTY is equipped with three, BTE with five planet gears.
The service brake system is air operated and dual-circuit type.
The frame is U-profile pressed from 8 mm thick steel, with profile height of 250 mm and 90 mm width. Both front and rear leaf springs are 1 500 mm long; the front springs consist of 11 leaves, rear springs have got 16 each.

Cabin

The three-seat, full steel cabin is heat and sound insulated, and the interior is fully upholstered. The two-piece windscreen is curved and made from laminated glass. The driver's seat can be adjusted vertically and horizontally, and it is sprung and damped. The heater fan is two-speed and the nozzles are located at windscreen, legroom and both ends of the dashboard. The windscreen wipers are with separate motors.
The last conventional type Vanaja lorries produced featured the Sisu R-series cabin.

Dimensions and weights

The contemporary Finnish legislation allowed a total weight of 16 tonnes for the two-axle variants. The three-axle models were allowed to be loaded up to total weight of 22 tonnes.
Dimensions and weights of some of the variants are listed in the below table. The manufacturer allowed an extra long platform with restricted total weight; those values are shown in Italic. The structural total weights differed from the nominal values; for example R-142 was allowed to be loaded up to 26 tonnes total weight in off-road use.
ModelLayoutWheelbaseKerb weightPermitted loadMax. gross weightMax. length of platform
R-141BPT4×24 350 mm5 810 kg10 190 kg14 500 – 16 000 kg4 390 – 5 720 mm
R-141BPT4×24 650 mm5 830 kg10 170 kg14 500 – 16 000 kg4 830 – 6 220 mm
R-141BPT4×25 950 mm6 110 kg9 890 kg15 100 – 16 000 kg7 120 – 8 100 mm
R-141DST4×24 350 mm6 200 kg9 800 kg14 000 – 16 000 kg4 700 – 5 800 mm
R-141DST4×24 650 mm6 330 kg9 670 kg14 900 – 16 000 kg5 300 – 6 400 mm
R-141DST4×25 950 mm6 510 kg9 490 kg15 400 – 16 000 kg7 650 – 8 400 mm
R-141DET4×24 350 mm6 400 kg9 600 kg14 900 – 16 000 kg4 800 – 5 800 mm
R-141DET4×24 650 mm6 530 kg9 470 kg15 000 – 16 000 kg5 400 – 6 400 mm
R-141DET4×25 950 mm6 610 kg9 390 kg15 500 – 16 000 kg7 800 – 8 400 mm
R-142BPT6×23 800 mm + 1 200 mm7 230 kg14 770 kg20 600 – 22 000 kg4 980 – 5 810 mm
R-142BPT6×24 050 mm + 1 200 mm7 270 kg14 730 kg20 850 – 22 000 kg5 500 – 6 220 mm
R-142BPT6×24 650 mm + 1 200 mm7 300 kg14 700 kg21 050 – 22 000 kg6 550 – 7 210 mm
R-142BPT6×25 050 mm + 1 200 mm7 470 kg14 530 kg21 350 – 22 000 kg7 330 – 7 800 mm
R-142CST6×23 800 mm + 1 200 mm7 580 kg14 420 kg21 000 – 22 000 kg5 180 – 5 810 mm
R-142CST6×24 050 mm + 1 200 mm7 640 kg14 360 kg21 200 – 22 000 kg5 690 – 6 220 mm
R-142CST6×24 650 mm + 1 200 mm7 700 kg14 300 kg21 800 – 22 000 kg7 030 – 7 210 mm
R-142CST6×25 050 mm + 1 200 mm7 820 kg14 200 kg21 800 – 22 000 kg7 610 – 7 800 mm
R-142CEV and DET6×23 800 mm + 1 200 mm7 770 kg14 230 kg21 100 – 22 000 kg5 300 – 5 900 mm
R-142CEV and DET6×24 200 mm + 1 200 mm7 820 kg14 180 kg21 100 – 22 000 kg6 050 – 6 700 mm
R-142CEV and DET6×24 650 mm + 1 200 mm7 960 kg14 040 kg21 300 – 22 000 kg6 950 – 7 480 mm
R-142CEV and DET6×25 050 mm + 1 200 mm8 040 kg13 960 kg21 600 – 22 000 kg7 800 – 8 100 mm
R-142CZT and DST6×23 800 mm + 1 200 mm7 570 kg14 430 kg21 000 – 22 000 kg5 150 – 5 810 mm
R-142CZT and DST6×24 050 mm + 1 200 mm7 620 kg14 380 kg21 200 – 22 000 kg5 650 – 6 370 mm
R-142CZT and DST6×24 650 mm + 1 200 mm7 760 kg14 240 kg21 400 – 22 000 kg7 000 – 7 480 mm
R-142CZT and DST6×25 050 mm + 1 200 mm7 840 kg14 160 kg21 400 – 22 000 kg7 600 – 8 100 mm
R-143CST6×43 800 mm + 1 370 mm8 370 kg13 630 kg21 300 – 22 000 kg5 470 – 5 950 mm
R-143CZT6×43 800 mm + 1 370 mm8 370 kg13 630 kg21 000 – 22 000 kg5 450 – 6 070 mm
R-143CZT6×44 800 mm + 1 370 mm8 370 kg13 630 kg21 300 – 22 000 kg7 250 – 7 880 mm
R-149BPT6×43 800 mm + 1 270 mm7 120 kg14 880 kg21 000 – 22 000 kg5 240 – 5 870 mm
R-149BPT6×44 800 mm + 1 270 mm7 330 kg14 670 kg21 500 – 22 000 kg7 150 – 7 120 mm