SIMM
A SIMM is a type of memory module containing random-access memory used in computers from the early 1980s to the late 1990s. It differs from a dual in-line memory module, the most predominant form of memory module today, in that the contacts on a SIMM are redundant on both sides of the module. SIMMs were standardised under the JEDEC JESD-21C standard.
Most early PC motherboards used socketed DIP chips for DRAM. As computer memory capacities grew, memory modules were used to save motherboard space and ease memory expansion. Instead of plugging in eight or nine single DIP chips, only one additional memory module was needed to increase the memory of the computer.
History
SIMMs were invented in 1982 by James J. Parker at Zenith Microcircuits and the first Zenith Microcircuits customer was Wang Laboratories. Wang Laboratories tried to patent it and were granted a patent in April 1987. That patent was later voided when Wang Laboratories sued multiple companies for infringement and it was then publicized that they were the prior invention of Parker at Zenith Microcircuits. The lawsuit was then dropped and the patent was vacated. The original memory modules were built upon ceramic substrates with 64K Hitachi "flip chip" parts and had pins, i.e. single in-line package packaging. There was an 8-bit part and a 9-bit part both at 64K. The pins were the costliest part of the assembly process and Zenith Microcircuits, in conjunction with Wang and Amp, soon developed an easy insertion, pinless connector. Later the modules were built on ceramic substrates with Fujitsu plastic J-lead chips and still later, they were made on standard PCB material. SIMMs using pins are usually called SIP or SIPP memory modules to distinguish them from the more common modules using edge connectors.The first variant of SIMMs has 30 pins and provides 8 bits of data. They were used in AT-compatible, 386-based, 486-based, Macintosh Plus, Macintosh II, Quadra, Atari STE microcomputers, Wang VS minicomputers and Roland Electronic Samplers.
The second variant of SIMMs has 72 pins and provides 32 bits of data. These appeared first in the early 1990s in later models of the IBM PS/2, and later in systems based on the 486, Pentium, Pentium Pro, early Pentium II, and contemporary/competing chips of other brands. By the mid-90s, 72-pin SIMMs had replaced 30-pin SIMMs in new-build computers, and were starting to themselves be replaced by DIMMs.
Non-IBM PC computers such as UNIX workstations may use proprietary non-standard SIMMs. The Macintosh IIfx uses proprietary non-standard SIMMs with 64 pins.
DRAM technologies used in SIMMs include FPM, and the higher-performance EDO DRAM.
Due to the differing data bus widths of the memory modules and some processors, sometimes several modules must be installed in identical pairs or in identical groups of four to fill a memory bank. The rule of thumb is a 286, 386SX, 68000 or low-end 68020 / 68030 system would require two 30-pin SIMMs for a memory bank. On 386DX, 486, and full-spec 68020 through 68060 systems, either four 30-pin SIMMs or one 72-pin SIMM are required for one memory bank. On Pentium systems, two 72-pin SIMMs are required. However, some Pentium systems have support for a "half bank mode", in which the data bus would be shortened to only 32 bits to allow operation of a single SIMM. Conversely, some 386 and 486 systems use what is known as "memory interleaving", which requires twice as many SIMMs and effectively doubles the bandwidth.
The earliest SIMM sockets were conventional push-type sockets. These were soon replaced by ZIF sockets in which the SIMM was inserted at an angle, then tilted into an upright position. To remove one, the two metal or plastic clips at each end must be pulled to the side, then the SIMM must be tilted back and pulled out. The earlier sockets used plastic retainer clips which were found to break, so steel clips replaced them.
Some SIMMs support presence detect. Connections are made to some of the pins that encode the capacity and speed of the SIMM, so that compatible equipment can detect the properties of the SIMM. PD SIMMs can be used in equipment which does not support PD; the information is ignored. Standard SIMMs can easily be converted to support PD by fitting jumpers, if the SIMMs have solder pads to do so, or by soldering wires on.
30-pin SIMMs
Standard sizes: 256 KB, 1 MB, 4 MB, 16 MB30-pin SIMMS have 12 address lines, which can provide a total of 24 address bits. With an 8 bit data width, this leads to an absolute maximum capacity of 16 MB for both parity and non-parity modules.
| Pin # | Name | Signal Description | Pin # | Name | Signal Description | |
| 1 | VCC | +5 VDC | 16 | DQ4 | Data 4 | |
| 2 | /CAS | Column Address Strobe | 17 | A8 | Address 8 | |
| 3 | DQ0 | Data 0 | 18 | A9 | Address 9 | |
| 4 | A0 | Address 0 | 19 | A10 | Address 10 | |
| 5 | A1 | Address 1 | 20 | DQ5 | Data 5 | |
| 6 | DQ1 | Data 1 | 21 | /WE | Write Enable | |
| 7 | A2 | Address 2 | 22 | VSS | Ground | |
| 8 | A3 | Address 3 | 23 | DQ6 | Data 6 | |
| 9 | VSS | Ground | 24 | A11 | Address 11 | |
| 10 | DQ2 | Data 2 | 25 | DQ7 | Data 7 | |
| 11 | A4 | Address 4 | 26 | QP* | Data parity out | |
| 12 | A5 | Address 5 | 27 | /RAS | Row Address Strobe | |
| 13 | DQ3 | Data 3 | 28 | /CASP* | Parity Column Address Strobe | |
| 14 | A6 | Address 6 | 29 | DP* | Data parity in | |
| 15 | A7 | Address 7 | 30 | VCC | +5 VDC |
* Pins 26, 28 and 29 are not connected on non-parity SIMMs.
72-pin SIMMs
Standard sizes: 1 MB, 2 MB, 4 MB, 8 MB, 16 MB, 32 MB, 64 MB, 128 MBWith 12 address lines, which can provide a total of 24 address bits, two ranks of chips, and 32 bit data output, the absolute maximum capacity is 227 = 128 MB.
| Pin # | Name | Signal Description | Pin # | Name | Signal Description | |
| 1 | VSS | Ground | 37 | MDP1* | Data Parity 1 | |
| 2 | MD0 | Data 0 | 38 | MDP3* | Data Parity 3 | |
| 3 | MD16 | Data 16 | 39 | VSS | Ground | |
| 4 | MD1 | Data 1 | 40 | /CAS0 | Column Address Strobe 0 | |
| 5 | MD17 | Data 17 | 41 | /CAS2 | Column Address Strobe 2 | |
| 6 | MD2 | Data 2 | 42 | /CAS3 | Column Address Strobe 3 | |
| 7 | MD18 | Data 18 | 43 | /CAS1 | Column Address Strobe 1 | |
| 8 | MD3 | Data 3 | 44 | /RAS0 | Row Address Strobe 0 | |
| 9 | MD19 | Data 19 | 45 | /RAS1† | Row Address Strobe 1 | |
| 10 | VCC | +5 VDC | 46 | NC | Not Connected | |
| 11 | NU | Not Used | 47 | /WE | Read/Write Enable | |
| 12 | MA0 | Address 0 | 48 | NC | Not Connected | |
| 13 | MA1 | Address 1 | 49 | MD8 | Data 8 | |
| 14 | MA2 | Address 2 | 50 | MD24 | Data 24 | |
| 15 | MA3 | Address 3 | 51 | MD9 | Data 9 | |
| 16 | MA4 | Address 4 | 52 | MD25 | Data 25 | |
| 17 | MA5 | Address 5 | 53 | MD10 | Data 10 | |
| 18 | MA6 | Address 6 | 54 | MD26 | Data 26 | |
| 19 | MA10 | Address 10 | 55 | MD11 | Data 11 | |
| 20 | MD4 | Data 4 | 56 | MD27 | Data 27 | |
| 21 | MD20 | Data 20 | 57 | MD12 | Data 12 | |
| 22 | MD5 | Data 5 | 58 | MD28 | Data 28 | |
| 23 | MD21 | Data 21 | 59 | VCC | +5 VDC | |
| 24 | MD6 | Data 6 | 60 | MD29 | Data 29 | |
| 25 | MD22 | Data 22 | 61 | MD13 | Data 13 | |
| 26 | MD7 | Data 7 | 62 | MD30 | Data 30 | |
| 27 | MD23 | Data 23 | 63 | MD14 | Data 14 | |
| 28 | MA7 | Address 7 | 64 | MD31 | Data 31 | |
| 29 | MA11 | Address 11 | 65 | MD15 | Data 15 | |
| 30 | VCC | +5 VDC | 66 | NC | Not Connected | |
| 31 | MA8 | Address 8 | 67 | PD1x | Presence Detect 1 | |
| 32 | MA9 | Address 9 | 68 | PD2x | Presence Detect 2 | |
| 33 | /RAS3† | Row Address Strobe 3 | 69 | PD3x | Presence Detect 3 | |
| 34 | /RAS2 | Row Address Strobe 2 | 70 | PD4x | Presence Detect 4 | |
| 35 | MDP2* | Data Parity 2 | 71 | NC | Not Connected | |
| 36 | MDP0* | Data Parity 0 | 72 | VSS | Ground |
* Pins 35, 36, 37 and 38 are not connected on non-parity SIMMs.
†/RAS1 and /RAS3 are only used on two-rank SIMMS: 2, 8, 32, and 128 MB.
# These lines are only defined on 3.3V modules.
x Presence Detect signals are detailed in JEDEC Standard.
Proprietary SIMMs
GVP 64-pin
Several CPU cards from Great Valley Products for the Commodore Amiga used special 64-pin SIMMs.Apple 64-pin
64-pin SIMMs were used in Apple Macintosh IIfx computers to allow overlapping read/write cycles.| Pin # | Name | Signal Description | Pin # | Name | Signal Description | |
| 1 | GND | Ground | 33 | Q4 | Data output bus, bit 4 | |
| 2 | NC | Not connected | 34 | /W4 | Write-enable input for RAM IC 4 | |
| 3 | +5V | +5 volts | 35 | A8 | Address bus, bit 8 | |
| 4 | +5V | +5 volts | 36 | NC | Not connected | |
| 5 | /CAS | Column address strobe | 37 | A9 | Address bus, bit 9 | |
| 6 | D0 | Data input bus, bit 0 | 38 | A10 | Address bus, bit 10 | |
| 7 | Q0 | Data output bus, bit 0 | 39 | A11 | Address bus, bit 11 | |
| 8 | /W0 | Write-enable input for RAM IC 0 | 40 | D5 | Data input bus, bit 5 | |
| 9 | A0 | Address bus, bit 0 | 41 | Q5 | Data output bus, bit 5 | |
| 10 | NC | Not connected | 42 | /W5 | Write-enable input for RAM IC 5 | |
| 11 | A1 | Address bus, bit 1 | 43 | NC | Not connected | |
| 12 | D1 | Data input bus, bit 1 | 44 | NC | Not connected | |
| 13 | Q1 | Data output bus, bit 1 | 45 | GND | Ground | |
| 14 | /W1 | Write-enable input for RAM IC 1 | 46 | D6 | Data input bus, bit 6 | |
| 15 | A2 | Address bus, bit 2 | 47 | Q6 | Data output bus, bit 6 | |
| 16 | NC | Not connected | 48 | /W6 | Write-enable input for RAM IC 6 | |
| 17 | A3 | Address bus, bit 3 | 49 | NC | Not connected | |
| 18 | GND | Ground | 50 | D7 | Data input bus, bit 7 | |
| 19 | GND | Ground | 51 | Q7 | Data output bus, bit 7 | |
| 20 | D2 | Data input bus, bit 2 | 52 | /W7 | Write-enable input for RAM IC 7 | |
| 21 | Q2 | Data output bus, bit 2 | 53 | /QB | Reserved | |
| 22 | /W2 | Write-enable input for RAM IC 2 | 54 | NC | Not connected | |
| 23 | A4 | Address bus, bit 4 | 55 | /RAS | Row address strobe | |
| 24 | NC | Not connected | 56 | NC | Not connected | |
| 25 | A5 | Address bus, bit 5 | 57 | NC | Not connected | |
| 26 | D3 | Data input bus, bit 3 | 58 | Q | Parity-check output | |
| 27 | Q3 | Data output bus, bit 3 | 59 | /WWP | Write wrong parity | |
| 28 | /W3 | Write-enable input for RAM IC 3 | 60 | PDCI | Parity daisy-chain input | |
| 29 | A6 | Address bus, bit 6 | 61 | +5V | +5 volts | |
| 30 | NC | Not connected | 62 | +5V | +5 volts | |
| 31 | A7 | Address bus, bit 7 | 63 | PDCO | Parity daisy-chain output | |
| 32 | D4 | Data input bus, bit 4 | 64 | GND | Ground |