Rosedale Railway


The Rosedale Railway was an goods-only railway line running from Battersby Junction across the heights of the North York Moors in North Yorkshire, England to reach iron ore deposits in the remote hills of the Rosedale valley. It opened in 1861 and closed in 1929.

Overview

The first construction of a recognisable railway along this route was in 1858 when The Ingleby Ironstone & Freestone Mining Company constructed a narrow gauge line to link existing mining operations with the North Yorkshire and Cleveland Railway at Battersby. Because of the difference in height between the junction at Battersby railway station and the moorland location of the workings, a steep 1 in 5 incline was located at Ingleby, where trucks would be hauled up the slope to a height of above sea level using the weight of descending full wagons. The length of the incline was and the wagons descended at an average speed of which resulted in a journey time of 3 minutes from top to bottom.
When the NY&CR had been absorbed into the NER, the NER decided to convert the line to standard gauge operations and extend the track from the top of the incline to mine workings at Rosedale run by the Rosedale Ironstone Mining Company, whom the NER had interests in. This line opened to the west side of Rosedale on 27 March 1861. Within a few years mining also began on the east side of the valley, and an additional branch line was run from Blakey Junction around the head of the valley to reach the new workings. The workings reached a peak production of over in 1873.
The route across the moors was very inhospitable during winter months. During a severe winter of 1916–17 the line was blocked for five weeks.

Closure and legacy

Because of increased costs and a fall in the price of iron, the mines closed in 1925. Operations continued for a few years extracting the valuable calcine dust from the slag heaps but traffic on the line finally ceased in 1929.
The original kilns at Rosedale West are still visible, whilst the nearby engine shed was dismantled with the stone being used for the construction of the village hall at Hutton-le-Hole, further down the valley. The incline and the trackbed from the incline to Blakey Junction is now a public bridleway, part of which is followed by the Coast to Coast Walk and the Esk Valley Walk.