Rhymney Railway A class


The Rhymney Railway A class were 0-6-2T tank locomotives introduced into traffic in 1910 and designed by the railway's engineer Hurry Riches. These were substantial sized tank engines, and weighed and were in length.

Construction

There were initially five locos in the class augmented by another five in 1911, then three in 1914, two in 1916 and three in 1918. They were built by Robert Stephenson and Company and Hudswell Clarke. The last eight differed in having Belpaire fireboxes and were classed as A1.
YearRR classRR Nos.BuilderBuilder Nos.GWR/BR Nos.
1910A10–14Robert Stephenson & Co.3387–339152–56
1910A115–119Robert Stephenson & Co.3392–339671–75
1911A15, 18–22Hudswell Clarke946–95157–62
1914A123–25Hudswell Clarke1063–106563–65
1916A126–27Hudswell Clarke1119–112066–67
1918A128–30Robert Stephenson & Co.3660–366268–70

Overview of RR classes

The A class, and the preceding M class of 1904 and R class of 1910, were closely related designs ideally suited to hauling heavy coal trains a relatively short distance.
These three classes were designed for work on the Rhymney Railway, replacing smaller locomotives. When the smaller railway companies were forcibly merged into the Great Western Railway in 1923, these modern 0-6-2's were in generally good order and had proved successful. Collectively they became the blueprint for the 200 strong GWR 5600 Class.

Rebuilds of RR classes

Fifteen A class locos were upgraded from 1926 onwards. All told twenty nine "Stephenson" locos were similarly dealt with up to as late as 1949. In 1929 No 55 was reboilered by the GWR and in this form was visually almost indistinguishable from the GWR 5600 Class.
The GWR number 2 boiler was also suitable for the M and R class Rhymney locomotives. The A and P classes were also rebuilt but used the slightly shorter standard number 10 boiler, also to good effect.

GWR 5600 Class

The design of the 5600 class followed the Rhymney designs quite closely but adopted GWR practice as far as possible, by utilising many standardized parts. Included in Collett’s innovations was a standard number 2 boiler which was suitable for the 5600, complete with the traditional copper GWR safety valve casing and copper-capped chimney.

Welsh 0-6-2T types

The railways of South Wales seem to have had a particular liking for the 0-6-2T type. This was because the nature of the work they undertook demanded high adhesive weight, plenty of power with good braking ability, but no need for outright speed, nor large tanks or bunker as the distances from pit to port were short. These Welsh locomotives were taken over by the GWR at the grouping in 1923 and many including seventeen of the Rhymney A, M, P and R's were rebuilt with GWR taper boilers. All the Rhymney Stephenson derived locos passed into British Railways ownership in 1948. Others included :
For further information on these pre-grouping locomotives see Locomotives of the Great Western Railway.