Remington Nylon 66
The Remington Nylon 66 was a rifle manufactured by Remington Arms from 1959 to 1989. It was one of the earliest mass-produced rifles to feature a stock made from a material other than wood. Previously the 22-410 Stevens combination gun had been offered with a Tenite stock. The firearms market generally lacked experience with synthetic stocks, making the Nylon 66 a risky gamble for Remington. The model name was taken from the polymer of the same name.
History
In the 1950s, Remington Arms was interested in designing a rifle that was cheaper to produce. After analysis, engineers determined that there were savings to be found in the production of the receivers and stocks of rifles. Thus Remington asked chemical engineers at DuPont to come up with a plastic that could replace both the wooden stock and the receiver. The specs given to DuPont called for a material that could be formed into any shape desired but that also had a high tensile-impact and flexural strength.After some research, DuPont came back to Remington with a compound they called Nylon Zytel-101. Zytel is DuPont's brand name for Nylon. This compound was ultimately used to produce the stock and receiver. After the Nylon 66 proved to be successful, Remington also marketed a series of bolt action and lever action rifles using Nylon stocks.
Design and features
The largely synthetic construction meant that the Nylon 66 could operate without any added lubricants. This made it popular in arctic regions, and indeed there have been many reports of indigenous peoples killing large animals, such as moose, with a.22 LR fired from a Nylon 66. Some have speculated that the light weight of the gun could potentially cause substandard accuracy in the field, but this does not seem to be a complaint from Nylon 66 shooters.The Nylon 66 was fitted with leaf sights as well as a grooved receiver that could accommodate a mount for a telescopic sight. It was available in several colors, such as "Mohawk Brown", "Apache Black", and "Seneca Green".
The 77 Apache version has a bright green stock and was sold by K-Mart. The Seneca Green is a dull colored green and, in some lighting conditions, Seneca Green is difficult to distinguish from the more common brown. This version was also made with a detachable 10 round magazine which, in contrast to the standard version, was often unreliable. A copy of the tube magazine model was also made by FIE of Brazil, but many of these had quality control issues. The standard U.S. made tube magazine model could reliably cycle hundreds of rounds without cleaning, provided high velocity ammunition was used.
Below are some production numbers to assist with the rarity of each model:
| Model | Number produced |
| Nylon 66 Gallery Special | Unknown |
| Nylon 66 150th Anniversary | 3,792 |
| Nylon 66 Bicentennial | 10,268 |
| Nylon 77 | 15,000 |
| Nylon 66 Seneca Green | 42,500 |
| Apache 77 aka Kmart Nylon | 54,000 |
| Nylon 66 Black Diamond | 56,000 |
| Nylon 10C | 128,000 |
| Nylon 66 Apache Black | 221,000 |
| Nylon 66 Mohawk Brown | 716,492 |
Variants
Nylon 66MB: Mohawk Brown, 1959–1987Nylon 66GS: Gallery Special 1962–1981. Shell deflector. Counter cable attachment on bottom of stock. A few were known to have been Apache Black.
Nylon 66SG: Seneca Green, 1959–1962 42,500 made
Nylon 66AB: Apache Black, 1962–1984 221,000 made.
Nylon 66BD: Black Diamond 1978–1987
Remington began numbering this model in 1967. Serial numbers for 1967 ran from 410000-419011. For 1968 the numbers ran from 419012–473710. These 1967–1968 serial numbers were located on the bottom of the barrel, about 3" back from the muzzle.