Reliant Scimitar


The Reliant Scimitar name was used for a series of sports car models produced by British car manufacturer Reliant between 1964 and 1986. During its 22-year production it developed into a range of versions including a convertible launched in 1980. All have a fibreglass body mounted on a steel box-section chassis.

Scimitar GT SE4 (1964–1970)

's first Scimitar was a coupé based upon the styling of a Daimler SP250 prototype and the chassis of a Reliant Sabre. It was first displayed in 1964. It was powered by a 2.6-litre Ford straight six from the Ford Zephyr and Zodiac. In order to keep cost down, many components in addition to the engine were existing ones originally designed for competitor models, a point emphasized for buyers of the early Scimitars in which unfolding the sun visor involved knocking the driver's mirror out of adjustment.
In 1966 the SE4A was replaced by the SE4B, with a 3.0 L V6 Ford "Essex" engine. A year later, in September 1967, the cheaper SE4C was introduced with a 2.5-litre version of the same engine and a reduction of £105 on the recommended retail price. The engine differed from the one fitted on the Ford Zephyr 6 in that the Reliant engine came with an alternator whereas Ford buyers had to be content with a dynamo.
Just over 1000 SE4s were produced.

1964: Scimitar GT SE4

Scimitar Coupe with 2.6-litre straight six engine
As the Sabre 6 began looking a bit dated, managing director Ray Wiggin started looking for a new design. While at the 1962 Motor Show, he saw a car called an Ogle SX250: it had been designed by David Ogle and it was based on the Daimler Dart SP250 chassis and running gear. The car had been privately commissioned by Boris Forter, managing director of the Helena Rubenstein Company, who later had another one built for his girlfriend.
Daimler didn't use the design, so Reliant approached Ogle and asked to buy the rights for it. Some subtle changes were made to the bodyshell and it was further modified to fit the Reliant Sabre chassis and running gear.
The new Scimitar GT car retained the straight-six engine from the Sabre, but with triple SU carburettors as standard it now produced 120 bhp and propelled the car to a top speed of. It was launched at the Earls Court Motor Show in 1964; it was praised for its elegant lines and performance figures for a price of £1,292. The price included wire wheels and a luxurious interior with comprehensive instrumentation. Optional extras included a choice of De Normanville overdrive unit, electric sunroof and ZF gearbox. Reliant produced approximately 296 straight-six Scimitar GTs.

1966: Scimitar GT SE4A/B

Scimitar coupé with 3-litre V6 Essex engine
In late 1966 Ford dropped the 2.6-litre Straight Six engine and replaced it with the new 3-litre Essex V6 engine. This meant that Reliant had to do a good deal of development work to the existing Scimitar GT to enable the new more powerful engine to fit and obtain best performance and handling.
As the Essex engine was shorter, it was mounted further back in the bulkhead to help improve weight distribution. The lower wishbones were re-positioned, the tower structures and cross members were reinforced and an anti-roll bar was fitted. Other modifications included replacing the wire wheels with wider steel wheels as standard, and the fitting of a higher-ratio rear axle.
The interior was updated to move with the times. There was now an all-anti-dazzle-black interior. The padded fascia board had crash pads at the top and bottom, and improvements were made with the ventilation by fitting directionally variable ventilator jets, as used by Ford.
This is what Autocar said about the new 3-litre Scimitar GT on 12 January 1967:
"At a Glance - High performance 2+2 coupe. Lusty, low revving engine in conjunction with high gearing gives effortless cruising at three-figure speeds. Good gear change, but rather wide ratios. Smooth, light clutch. Ride and handling very good, and much improved over the earlier car. Light, accurate steering and first class brakes with powerful servo. Ventilation improved but still not ideal. Fuel and range very good".

1967: Scimitar GT SE4C

Scimitar coupé with 2.5-litre V6 Essex engine
Reliant introduced their third and final version of the V6 Scimitar GT in late 1967. To widen its appeal they launched a slightly less powerful Scimitar GT.
Using Ford's 2.5-litre version of the V6 Essex engine meant that the car could still reach speeds of over, have slightly better fuel economy, but ultimately reduce the cost to the public by approx £120.
Externally, the only difference between the 3-litre and 2.5-litre versions was the small badge on the boot giving the engine size. Approximately 118 of the 2.5-litre Scimitar GTs were sold before this version was withdrawn. Production of the standard Scimitar GT continued until November 1970.

Scimitar GTE SE5 (1968–1972) and SE5A (1972–1975)

of Ogle was asked to submit some body designs based on the Ogle Design GTS estate car experiment for a new four-seater Scimitar, the SE5 Reliant Scimitar. Managing Director Ray Wiggin, Chief Engineer John Crosthwaite and fibreglass body expert Ken Wood went to Ogle’s in Letchworth to view some mock-up body designs for the new SE5. Wiggin told Wood to proceed with a proper master.
The SE5 was conceived and ready for the 1968 Motor Show in less than 12 months. For the SE5 John Crosthwaite and his team designed a completely different longer chassis frame, revised suspension, new and relocated fuel tank, a rollover bar, new cooling system, spare wheel mounted in the nose to give increased rear space and a fuel tank. When designing the chassis Crosthwaite worked closely with Ogle body stylist Peter Bailey to modify and refine the prototype.
The main change introduced in the SE5 was the sports estate hatchback body shape, although other car manufacturers had also produced hatchback models.
The SE5 came with the same 3.0-litre Ford Essex engine used in the SE4a/b. This gave the SE5 a claimed top speed of over. A Borg-Warner 35 automatic transmission was added as an option in 1970 and by 1971, overdrive on the 4-speed manual was offered. In 1972 several improvements were included in the upgrade to SE5A, including a boost in power. The extra 7 hp and maximum engine speed raised performance and the GTE was now capable of in 8.5 seconds and top speed was raised to. The SE5's flat dashboard also gave way to a curved and moulded plastic one.
The SE5A can be recognised from a SE5 at the rear by the reverse lamps which are below the bumper on the earlier model and are incorporated into the rear clusters on the later version. Badging changes included changing the "SCIMITAR" lettering from a narrow type-style to a fatter one.
Directly following the announcement of the car, Autocar magazine tested a 3-litre GTE in October 1968. They reported a maximum speed of and a time of 10.7 seconds. Overall fuel consumption for the test came in at 18.5 mpg. The manufacturer's UK market recommended retail price, including sales taxes, was £1,759. The 3-litre MG MGC GT was retailing at this time for £1,337 while Rover's 3500 was offered for £1,791. Launch of the more directly comparable Volvo 1800ES was still four years away.
4,311 SE5s were produced. It was an instant success; GT production was cut down and the proportion of GTEs to GTs being built was four-to-one. Reliant increased its volume by 20% in the first year. The 5A model sold more than any other Scimitar, with 5105 manufactured. Princess Anne was given a manual overdrive SE5 as a joint 20th birthday present and Christmas present in November 1970 by the Queen and the Duke of Edinburgh. It was Air Force blue in colour with a grey leather interior and registered 1420 H in recognition of her position as Colonel-in-Chief of the 14th/20th Hussars. Anne subsequently owned eight other GTEs.

Scimitar GTE SE6 (1975–1976), SE6A (1976–1980) and SE6B (1980–1986)

More of a luxury model than the SE5, the SE6 series was promoted to the executive market. These models were two-door sports estates, again with the Ford V6 3.0 L engine as used in the SE5A with 135 bhp,: the wheelbase was increased by and the track by making the cars correspondingly longer and wider than their predecessors. The extra length was used to improve rear-seat legroom and access which enhanced the car's credentials as a 'genuine' four-seater. Noticeable changes from the earlier models were the increase in the outer headlamp size from 5.3/4" to 7" and the replacement of the chrome plated bumpers with rubber ones. A Laycock overdrive on third and fourth gear was optional. The SE6 was replaced by the SE6A in late 1976. 543 SE6 models were produced.
The SE6A displayed a number of changes, including Lockheed brakes and suspension revisions. An easy way to spot a SE6A from a SE6 is the change to orange from red reflectors on the rear extractor vents, and the three vertical grooves in the front bumper were removed. 3877 SE6As were made—making it the most popular version of all the SE6 shape.
Ford had stopped making the Essex engine for the Capri by 1981, and production stopped completely in 1988 so one of the major differences with the SE6B was the engine. The German-built Ford Cologne 2.8 L V6 was used instead and provided similar power but rather less torque at low revs. The final drive ratio was lowered from 3.31:1 to 3.54:1 to compensate. All SE6Bs were equipped with the quite troublesome Pierburg/Solex carburetted engines and although the battery was moved from the SE6/SE6A position to allow for injection equipment to be fitted, none ever left the factory so fitted. Some late versions came with the galvanised chassis as standard but the exact numbers and chassis details are vague.
Introduced at the 1980 Geneva Motor Show, only 407 SE6Bs were manufactured. Production ceased by 1986.

Scimitar GTC SE8 (1980–1986)

Reliant began planning a convertible in 1977 and commissioned Ogle Design to create a proposal. Tom Karen adapted his earlier GTE design and created a four-seater convertible with a good-sized boot. From the B-post back, all of the panels were new, with extra bracing introduced between the rear side panels and door hinge plates running under the dashboard. The roll hoop from the GTE was retained, and for additional support this was linked to extra tubes running around the front screen creating a Triumph Stag-like T-bar design that would ensure the rigidity of the new body design. As the car sported a separate chassis and the extra bracing, it did not suffer from the scuttle shake that unibody convertibles could be prone to suffer.
The hood was designed in house by adapting the hood frame from a Triumph Stag, with a bespoke cover made of mohair.
A prototype car was produced in 1978 and was powered by a 3.0 Essex engine. Later Reliant replaced it with a 2.8 Cologne engine, because Ford had withdrawn its Essex engines from the European market in favour of the Cologne unit. This was slightly down on torque compared to the Essex engine, so to improve performance Reliant changed the final drive ratio from 3.31 to 3.54. The GTC was launched in March 1980, with a hardtop added after the Birmingham Motor Show that year. While it was well received by the motoring press, in 1980 the country was heading into a recession and Reliant struggled to sell its £11,360 convertibles in great numbers. As a result, many cars were left sitting at the factory for months until owners could be found. By 1986 the Scimitar GTC cost 20% more than a Ford Escort XR3i Cabriolet, a similar offering in respect of seats and performance.
After production at Reliant ceased, Middlebridge Scimitar Ltd. acquired the manufacturing rights to the Scimitar GTE and GTC in June 1987. This company, based in Beeston, Nottinghamshire, produced a 2.9 L version of the GTE with many modifications and modernisations including electronic fuel injection and a five-speed Ford T9 gearbox with the Ford A4LD 4-speed auto as an option.
The fifth Middlebridge Scimitar built was delivered to Princess Anne. Only 78 Scimitars were ever produced by Middlebridge before the company went into receivership in 1990. One GTC was made, using a LHD body from Reliant which was converted by Middlebridge to RHD but the car was never completed and eventually the body and chassis were separated and sold off to new owners. The production rights were subsequently acquired by Graham Walker Ltd., which as of 2014 built Scimitars to order.