Pinsetter


In bowling, a pinsetter or pinspotter is an automated mechanical device that sets bowling pins back to their original position, return bowling balls back to the front of the alley and clear fallen pins on the pin deck. During the earlier period of bowling, a pinsetter was originally a person who manually set the pins and returned the ball to the bowler through simple ball-return rails. The first mechanical pinsetter was invented by Gottfried Schmidt, who sold the patent in 1941 to AMF, which largely did away with pinsetting as a manual profession, although a small number of bowling alleys still use human pinsetters. While humans usually no longer set the pins, a pinchaser, or in slang "pin monkey", often is stationed near the equipment to ensure that it is clean and working properly, and to clear minor jams.
Beginning in the 1970s, modern pinsetters are integrated with electronic scoring systems of varying sophistication. While many pinsetters have a manual reset button to use in case the pinsetter does not automatically activate at the correct time, other types have no automatic tracking of the state of the game – especially for the candlepin and duckpin bowling sports which use smaller balls – and are almost always manually activated.

Common terms and design features

The design of the machines varies, depending both in individual company's hardware designs, and for the particular bowling sport's playing rules and equipment specifications. Several types of bowling make use of different designs for machines due to the different size and shape of the pins and balls. Common part descriptions for just about all pinspotting units consist of:
In the mid 1800s, various alternatives to free-standing pins received U.S. patents to solve perceived problems in pinsetting and ball return, aiming to avoid the need for human pinsetters. One scheme involved pins with spherical bases that when hit by a ball merely fell over, in place, to be rotated back to a vertical position. A second arrangement involved resetting the pins via cords descending from respective pin bottoms to weights beneath the pin deck. Another design involved suspending the pins with overhead cords.
In the decades leading up to the introduction of fully automatic units, semi-automatic pinsetters such as the Brunswick B-1 and B-10, having a manually filled "table" similar to those of fully automatic units and operating much the same as the later units, were used by human pinsetters to speed up manual operation and assure accurate spotting. The oldest operational bowling facility in the United States, Milwaukee, Wisconsin's Holler House, opened in September 1908, is one of the few remaining all-manually operated alleys that still uses Brunswick "table-style" manual units.

[Ten-pin] pinsetters

AMF pinspotters

The AMF family of pinspotters, first marketed in 1952 are the first ones used in quantity in the industry. They have changed little since the mass-produced 82-30 version. There are three main pinspotter models, the aforementioned 82-30, the 82-70 and the newest versions, the 82-90 and the 82-90XLI, both of which use the 82-70's general mechanical design. AMF pinspotters were originated by American Machine and Foundry and are now manufactured by QubicaAMF Worldwide. All operate generally the same way with small improvements.
The 82-30's operation and mechanics, having been significantly developed from AMF's , which depended much on the use of suction to hold the pins in a double-sided spotting table for both spotting remaining pins and setup of new racks of pins, are quite different from the Model A, A-2 and JetBack units from Brunswick, with differing sweep and table designs, and especially in how the pins are handled for storage, after they got to the top of the machinery. After the bowler rolls their ball, and knocking down the pins, the ball strikes the pit cushion block. This activates the machine, which lowers the sweep to the guard position. Then the table descends and the respot cells close around each neck of the standing pins. The cells that have pins in them complete electrical circuits that send scoring information to the display, and turned on one or more of ten "pindicator" lights – pioneered by AMF in May 1953 – in an electrically illuminated triangular framed screen on the pinspotter's masking unit in front of the machine, to identify remaining pins.
After the table lifts the remaining pins, the machine runs the sweep, clearing dead pins from the pin deck, then returns to the guard position. Ball and pins travel on a continuously running carpet belt at the bottom of the pit. The ball, being heavier, travels to one of the side kick-backs where it enters the ball return, shared by adjacent lanes. The pins travel under the cushion into the ring-shaped, revolving circular pin elevator, at the rear center of the unit, which brings the pins up to a "distributor arm" that travels laterally as well as forward and back over the table , to deliver the pins to the corresponding bins or "spotting cups" as known in the 82-30's factory manuals, awaiting the next spotting cycle. In the 82-30, its semi-cylindrical "spotting cup" bins are part of the visible spotting table suspended below the table's frame, each at a roughly a 45° angle with each "cup" inclined, pin-base-forward, in front of each spotting cell, and clearly visible to the bowler whenever the table approaches its lowermost position. After the table returns to its upper position, the sweep also lifts, and the machine shuts down to await the next ball. For spotting the new rack of pins, the 82-30 version tilts the pin-filled spotting cups vertically as the table descends, and tilts the cups slightly rearwards to clear the new rack of pins just as the table starts upwards, leaving the new rack of pins spotted on the lane for the next frame. Should the spotting cups not yet be filled with a full rack of ten pins for the next frame, the sweep bar pauses in its forward "guard" position after its rearwards stroke to clear any fallen pins, until the cups all have pins in them, with the table only descending when the cups have all filled, and are ready to set them onto the pindeck.
Beginning in December 1961, the 82-30 units also became famous for having the "Sparemaker" version of the earlier triangular pindicator screen on their masking units as advertised by AMF and their staff's pro bowler Dick Weber, which added a set of eleven lighted "arrows" to the usual numbered ten lights for standing pins, triangular corner lights that indicated the first or second ball to be rolled, and separate lights to indicate a foul, or a strike. The "arrows" were for the purpose of advising an inexperienced bowler to assist in spare conversion, by indicating where a second ball delivery should hit the remaining pins for a successful conversion, and were triggered by appropriate combinations of standing pins that helped the machine select which one of the eleven arrows to illuminate.
There have been specific upgrades and improvements made to the machines produced after the 82-30, with after-market solid-state/microprocessor-operated controllers available for the 82-30 itself. The 82-70 is the general standard in most AMF-equipped modern bowling centers today. It features a microprocessor-operated chassis that is upgraded to short cycle the machine for strikes, gutter balls, or 7–10 pick-offs. It features solid state motors. The 82-90 and the 82-90XLI are further upgrades, basically using the 82-70's mechanics, which replaced the older, completely electro-mechanical controls with machine status indicator lights, much more sophisticated "pin storage" design, single control centers that handle two machines, and perhaps the most important upgrade is the self shutdown control, which shuts the machine down to prevent damage from continuing to operate with a fault. The 82-90 models feature a deck that is thinner than the 82-70.
QubicaAMF Worldwide has also introduced many different scoring systems that are compatible with all pinsetters and pinspotters.

Brunswick A series pinsetters

The Brunswick Model A, dating from 1956, as well as the developed A2 and the JetBack versions of it, work as follows.
When an A series pinsetter starts the reset process, balls and pins are pushed off the end of the lane by the rake or sweep onto a shaker board in place of the AMF-variety carpet belt. This "shaker board" transfers the ball and pins to the back of the pit, behind the lane's pindeck. Two rotating wheels, at the backside of the unit, are situated with their common axis along the bowling lane. The ball-lift wheel is the front most wheel and has a continuous smooth surface with cork strips adhered to grip and push the ball onto the lift rods. Pins fall rearwards through the unit into the pin wheel, which capture the pins and sends them up to the pin elevator, similar to the AMF unit's design.
When a ball rolls onto the ball-lift wheel, friction from the cork strips lifts the ball up onto the two lift rods that are covered with a rubber material. When the ball is between the lift rods and the ball wheel it is rolled upward and is dropped onto a metal track that leads the ball to an acceleration belt. The acceleration belt pushes the ball at a fast speed underneath the lanes until the ball is pushed upward by two wheels located at the head of the ball return track, where it is delivered back to the bowlers.
When a pin rolls back, the smaller diameter of the pin allows it to fall rearwards through the ball wheel. As the pins are moving from the shaker board, they will bounce around until it lands in a pocket in the pinwheel. The wheel brings the pin to the top and drops it into a metal tray, called a "turnpan", similar to the orientation pan that exists on the rear end of the AMF 82-30 unit's pivoting pin distributor arm. It's shaped somewhat like a scoop, with the lip of the scoop facing the front of the machine. From there a pin elevator lifts the pin up towards the top of the pinsetter, to drop into a rotating metal basket called the "pin turret", letting it slide into one of ten spots as the turret rotates – nine around the periphery in groups of three spots each, and one in the center for the number-5 pin. When a pin lands in an empty location in the turret, the turret rotates so that the next pin will land in the next empty location, with the 5-pin chute in the center of the turret being filled last. Once the turret is full, and the spotting table reaches the top of its travel, all ten pins are simultaneously dropped from the turret into the spotting chutes of the table's upper level, holding them in the table's upper level as the table lowers them through its full downward travel close to the lanebed, to set the new rack of pins on the pin deck. As the table lowers towards the pindeck to set the new rack of pins, it is visibly protected with its attached sheet metal "deck shield", visible to the bowler at any time the spotting table needs to either descend part-way to handle standing pins after the first ball, or to fully descend to set the new rack of pins for the next frame. The Model A, A-2 and JetBack series pinsetters all characteristically halt their operation, should the pin turret not yet be full of pins for the next frame, by pausing the sweep bar at the back of its rearwards travel and holding the table in its fully elevated position, until the pin-turret fills and releases its load into the spotting table's upper level.
This style of machine is typically loaded with 20 pins, though most proprietors normally put in 21 pins to facilitate quicker loading and faster operation of the pinsetter, especially in cases where the bowler make two strikes in quick succession — on all the Model A-based unit designs, the "second ball cycle" used for both a second ball's delivery or a strike won't complete if the turret is not full, with the deck waiting in its elevated position as stated previously. Adding an extra pin does not put undue stress on the machine, but adding more than that is not advisable due to damage that can occur to the machine. Other centers will only load the pinsetter with 19 pins. Having only 19 pins in the machine will cause fewer stops from time to time but it will slow down the progress of the game if multiple strikes are thrown in succession.
The later A2 and JetBack versions, otherwise each virtually identical to the original Model A design, were augmented enough to have much faster ball return action than the original Model A units. the A-2 was also designed to be a faster machine overall to increase the number of frames that could be bowled in a given time frame, thus increasing the revenue of the bowling center.
The visible deck shield, as well as the noticeable sounds of pins entering the pin elevator and of the next set of pins dropping from the turret into the deck chutes, are unique to the Brunswick A series. There is a large Brunswick "crowned-B" on the front of the deck shield of the Model A, "A-2" on the A-2 deck shield front, and "JetBack" on the JetBack deck shield front, unless these markings have been removed or covered by the bowling center proprietor.

Brunswick GS series pinsetters

The GSX is Brunswick's current pinsetter. This machine uses a conveyor belt on the pit floor to move the pins to a vertical elevator system similar to the ones utilized on the AMF 82 series pinspotters, while the ball exits the pit at the side through a ball door. Pins are loaded using a combination of belts. The ball return system on this machine uses an under-lane accelerator as opposed to a lift. It lowers the pin table on every cycle to determine scoring.
The original model in the GS series was the GS-10, which was principally designed by Augusti Schmid in Scherzenbach, Switzerland to promote the sport of bowling throughout Europe. In 1984, Brunswick Bowling & Billiards Corporation acquired the rights to manufacture and sell the GS-10 pinsetter. The mechanical portion of the pinsetter was originally manufactured in the Brunswick plant located in Stockach, Germany. In 1999 the mechanical manufacturing was relocated to Hungary. The electronic control system is manufactured in Michigan, near the Brunswick plant located in Muskegon, Michigan. Subsequent models :
The GS is characterized by a sweep that rotates downward as soon as the ball enters the pin deck. A GS-X shows “gsx” on the sweep when it is down, unless this marking has been removed or covered by the bowling center proprietor.

Other types of ten-pin pinsetters

The Mendes company produced a magnetic pinsetter known as the MM-2001. It featured a flat magnetic pin table and magnets on the head of each pin. It had a pit similar to the AMF and an elevator similar to the GSX. Pin loading involves the combination of a carousel and magazine. The company claimed this technology reduces stops in play due to table jams on out-of-range pins. Mendes was bought out by Qubica, which sold the machine as the MAG3 until its partnership with AMF.
The now-defunct Bowl Mor firm of central Massachusetts that was more famous for their candlepin pinsetters, also made tenpin pinspotters early in their history. Some of these units are still in service, with having continued to use them, with some design features in appearance and function.
String-type pinsetters, similar to those used for five-pin and some nine-pin lanes, is available in ten-pin bowling format. The system is mechanically identical to the five-pin counterpart and can be found in various low-cost bowling centers, typically arcades and other recreational centers, as well as personal bowling lanes installed in private homes. Many bowling equipment manufacturers offers ten-pin string pinsetters, with notable examples being the QubicaAMF TMS String Pinspotter and the Brunswick StringPin.

Candlepin pinsetters

The most common candlepin pinsetters were made by a Massachusetts company named Bowl-Mor, which was founded in the 1940s by two attorneys, Howard Dowd and R. Lionel Barrows. According to the International Candlepin Bowling Association, Dowd and Barrows were searching for business venture that could weather an economic depression. Marketing research on their part found that participant sports met this requirement, and that bowling was one of the top three participant sports at the time. The first Bowl-Mor pinsetters were installed at the now-defunct Whalom Park amusement park in 1949. Though no longer manufactured, refurbished units, parts and maintenance support are available from several vendors.
Bowl-Mor pinsetters have a depressed pit approximately 14" long at the end of the bowling lane, placed about 4" below the level of the lane surface, with a curtain behind it, hanging past the lane surface but not touching the bottom of the pit. The curtain arrests the backwards motion of struck balls and pins, so that they fall onto the pit. When a reset takes place, a "twin-board" sweep bar unit descends, driven by a roller chain drive system on each side of the machine along a pair of "L"-shaped tracks — one on either side, and sweeps the pins and balls off the lane, rearwards off the pin-plate, and past the curtain and onto a rotating circular turntable in the pit, possessing eight flat radial "fences" to push the pins rearwards. Here, pins and balls separate, being spun off the "fences" of the steadily rotating turntable by centrifugal force into the pin elevator unit.
A pin elevator composed of a roller chain-driven rotating rack of open frames catches the candlepins and hauls them towards the top of the machine, and then turns 90 degrees to bring the pins horizontally across, bringing the pins past ten conveyors each wide enough to hold pins in a lengthwise orientation. Unlike the pinspotters used for tenpins and duckpins, since candlepins have identical "ends" to them, the machine does not have to orient the candlepins in one particular direction. The pins fall off the end of the conveyors into spotting tubes, mounted at their base onto the plate that forms the main part of the spotting table. As the sweep nears the forward end of its travel, and then begins its ascent to its resting position, the table drops to the metal plate pindeck at the end of the lanebed, and release a set of pins, and then ascends to its own resting position, ready to be filled with pins once more.
A separate elevator next to the turntable transports the balls to the ball return system, which has a near-vertical ramp that the balls roll down to gain enough momentum to roll through either an above-lane or submerged trough back up the alley, entering the ball return rack next to the approach area where players can grab them. Bowl Mor pinsetters are stocked with 24 to 27 pins, and are deemed substantially more reliable than typical Ten-pin bowling pinsetters. Due to the playing rules of candlepin bowling allowing fallen "dead wood" pins to remain on the lane between each ball's roll, no provision has ever been made for "spotting cells" in a candlepin pinsetter's spotting table, simplifying the machines' design. Most parts of the machine are driven by chains – especially the sweep board's drive system, on two L-shaped tracks on either side of the unit – or belts. A Bowl Mor unit weighs approximate, and draws 24 amperes at 110 volts from three-wire 110-220 volt service mains. The ICBA lists the cost of a refurbished Bowl Mor unit at approximately $5000.
AMF manufactured candlepin pinsetters for a short time in the 1960s, using a Bowl-Mor style spotting table and an adapted tenpin-style sweep bar that operated during its sweep.
Unless triggered into action by an automated scoring unit, candlepin pinsetters must be started by the bowler at the conclusion of a frame, by using a button or foot pedal operated switch to start the reset cycle.

Five-pin pinsetters

is a popular variation in Canada, and pinsetters fall into two categories: string and free-fall. String pinsetters are more prevalent, and consist of machines attached to the head of each pin, by means of a cord. Essentially, the pinsetter is triggered by the movement of any pin by more than an inch or two. With that, the machine lowers a guard, pulls up all 5 pins, and resets those that did not move. There is, on average, a three-second lag from when the pins were knocked down to when the guard is lowered. The pit floor is angled such that the ball is gravity-fed to a track that leads to an elevator. The elevator lifts the ball to the return track.
Free-fall 5-pin pinsetters to their ten-pin counterparts, and requires initiation by the bowler pressing a "reset" button as a candlepin unit does to "cycle" it, when a ball is bowled or pin knocked down. When the player pushes their "Reset" button, the machine lowers a guard, lifts standing pins and sweeps away the downed pins. If it does not recognize any standing pins, it will set up a new set for the next frame. Unlike tenpin, balls and pins are picked up in the same elevator or conveyor and are separated at the top of the machine.
The PBS family of pinsetters are the most frequently used, and many consider the PBS as the workhorse of the industry. The PBS family includes models made by Schmid & Company as well as the CA-1. These machines are straight electrical and do not require air compressors unlike pneumatic machines. The Schmid machines ran using relays while the CA-1 used circuit boards. The PBS brand was bought out by Brunswick, who introduced a second generation Schmid pinsetter dubbed the 81-5 as well as a 10-pin string pinsetter and a convertible five-ten pin machine marketed as the Chamelion.
The Mendes family of string pinsetters is not as common as the PBS family. Mendes machines are easily spotted for its shield that descends on a hinge like a closing door. The machine may immediately start up if all the pins are knocked down. The early Mendes string pinsetters were pneumatic. They released an electrical version of the machine known as the ME90. Mendes was bought out by Qubica—now QubicaAMF Worldwide. The machine is now marketed by QubicaAMF under the TMS name These machines are available for five and ten pin, but there is no convertible version.
A third family of pinsetter was recently released into the market by Paule Computer Systems. The machine—marketed as the Merlin—is a convertible five/ten pin string pinsetter that uses 15 strings. The changeover time of this machine is quick. The PBS version uses 12 strings—a changeover requires the headpin and the two corners to be restrung.

Duckpin pinsetters

is played in two varieties.
Regular duckpin bowling is popular in the northeastern and mid-Atlantic United States. One popular pinspotter in this sport is the Sherman model, named after its inventor, Ken Sherman, which was produced from 1953-1973. It has continuously moving conveyor belts at the ends of the gutters beside the pin deck as required by the sport's ruling body, the National Duckpin Bowling Congress that move fallen pins to the pit. The Sherman's sweep device is located on the right side, vertical "kickback" panel of the lane and pivots 180 degrees to clear pins. The pin table always handles the pins by the neck. A new rack of pins is created with a moving magazine that is shaped like a pin triangle. When the magazine is loaded and the bowler is ready for a new set of pins, a lever pushes the magazine unit out to the pin table so it can take the pins out of the magazine and then set them down on the lane.
The Bowl-Mor company also made a duckpin pinspotter for a time, using a similar sweep device to its more famous candlepin machines.
Soft belly or rubberband duckpin is played in Quebec. Most of these bowling centers use a string type pinsetter similar to five pin. Apart from five-pin, rubber band duckpin is the only bowling variant that currently sanctions string type pinsetters. The free-fall machine for this sport features a rotating turntable in the pit floor similar to a Bowl-Mor candlepin unit, conveyor belts in the gutters as required in the regular duckpin game in the US, an elevator similar to the Brunswick GSX, a turret similar to the A-2, and a rather flat looking pin table. The sweep is similar to the candlepin Bowl-Mor.

Off-spot pins

Older table-based pinsetters that pick up the pins between throws could malfunction if a pin were moved sideways when the ball is thrown, but remained standing. The pin would now be out of alignment with the setter pickup holes, and the table mechanism would collide with these misplaced pins. Failure of the device to detect pin drift can result in setter mechanism collision damage, pin crush damage, or lane damage from blunt force pressure of the setter pressing down on the misaligned pin.
If a pin had drifted but still managed to be picked up, older table pinsetters would simply realign the pin into the correct spot when placing it back onto the lane. This results in less than accurate gameplay since the table is changing the pin positions during the pickup process.
Regular table-style fully automated tenpin pinspotters from AMF and Brunswick, from their beginnings earlier in the 20th century, have been required by the United States Bowling Congress to be able to accurately re-spot "off-spot" pins that have been knocked out of position, sometimes up to 15 cm from the normal setting position, and then place them back onto the lane in the same location. If the pins are sufficiently out of position to not be pickable, the table will detect contact with the misplaced pin, and shut down the pinspotter to prevent mechanism damage.
String pinsetters generally do not have a mechanism to place pins back on the lane exactly where they were before, during the spare clearing. Since there is no table, collision damage is not possible with a string pinsetter, but they can suffer from string entanglement when the pins are being picked up, that prevents pins from aligning with the pickup holes.