Parapsicephalus
Parapsicephalus is a genus of long-tailed rhamphorhynchid pterosaurs from the Lower Jurassic Whitby, Yorkshire, England. It contains a single species, P. purdoni, named initially as a species of the related rhamphorhynchid Scaphognathus in 1888 but moved to its own genus in 1919 on account of a unique combination of characteristics. In particular, the top surface of the skull of Parapsicephalus is convex, which is otherwise only seen in dimorphodontians. This has been the basis of its referral to the Dimorphodontia by some researchers, but it is generally agreed upon that Parapsicephalus probably represents a rhamphorhynchid. Within the Rhamphorhynchidae, Parapsicephalus has been synonymized with the roughly contemporary Dorygnathus; this, however, is not likely given the many differences between the two taxa, including the aforementioned convex top surface of the skull. Parapsicephalus has been tentatively referred to the Rhamphorhynchinae subgrouping of rhamphorhynchids, but it may represent a basal member of the group instead.
Description
The type skull of Parapsicephalus, which is long as preserved, suggests that it was of medium size. Comparisons with the related pterosaurs Scaphognathus, Dorygnathus, and Jianchangnathus indicates that the full skull would have been long. Wellnhofer estimated its wingspan at ; more recently, a referred humerus, which is long, has produced wingspan estimates of.Skull
When viewed from the side, the convex top of the skull formed a gentle slope. The elongate frontal process of the premaxilla, which extends backwards towards the eyes, may have supported a low crest along its midline. Below the nostril, the premaxilla meets with the maxilla; their junction is marked by a discontinuity in the surface texture of the bone. Overall, the oval-shaped antorbital fenestra, situated behind and separate from the nostril, measures long and tall. The maxilla extends backwards in a half-moon shape to encircle the front end of the fenestra, with the top prong of the maxilla forming a 45° angle with the horizontal. The top end of the fenestra is enclosed by the thin, rectangular, and slightly concave nasal, and the lacrimal, which is not well-preserved but may have been long, slender, and triangular. On the underside of the skull, the maxilla forms the majority of the palate, extending back from below the external nostrils. Along the midline of the maxilla is situated a thin strip of bone, the vomer, which connects back to join the pterygoid.At the back of the antorbital fenestra is the jugal, which has often been illustrated as a small V-shaped, two-pronged structure, but it is actually large and has four prongs. The lacrimal process extends forward and upward from the main body of the jugal, while the more robust postorbital process extends backward and upward. Collectively, they enclose the bottom of the eye socket, with angles of 45° on each side. The pear-shaped eye socket measures tall and wide at the widest point. Behind the jugal is the quadratojugal, which has traditionally been depicted as hypertrophied and occupying the location of the back portion of the jugal; it is actually a small, half moon-shaped bone wedged between the jugal and the quadrate and situated below the elongate infratemporal fenestra. Overall, the infratemporal fenestra is shaped similarly to the eye socket. The quadrates are strap-like, and wrap around from the back to the bottom of the skull. Although mostly obscured, the removal of the parietal during preparation has exposed part of the endocast of the brain, which has a large flocculus and cerebrum.
The frontal, which is located on the top of the skull between the premaxilla and the eye socket, takes the shape of a sub-rectangle with a large, rhombic process extending forward to meet the nasal. The frontal process of the premaxilla cuts into the frontal along the midline of this rhombus. Contacting the rear ends of both the frontal and jugal is the thin and triangular postorbital, about long along the bottom, extends backwards to separate the infratemporal and supratemporal fenestrae. The supratemporal fenestra itself is a somewhat four-sided oval. Behind the postorbital and closing off the supratemporal fenestra is the three-pronged squamosal, which is partially overlapped by the robust, spatula-like paroccipital processes of the occipital. Between the processes is the foramen magnum, which is a oval. Further below is the basoccipital, which forms a rounded plate that encloses the back of the skull.
Referred pectoral girdle
The humerus referred to Parapsicephalus probably had a slightly deflected deltopectoral crest. It bears a sub-triangular medial process, wide and long, that originates close to the humeral head. In cross-section, the shaft of the humerus is sub-rectangular, and about wide at the midpoint; the bottom third of the shaft is bowed forward. The scapula and coracoid appear to be completely fused; they are respectively and long, and form an angle of 70° to each other, creating overall a V-shaped structure as in Sericipterus. The outer end of the scapula is noticeably wider than the inner end, and the glenoid is positioned entirely on the scapula, with the shaft curving about 15° towards the glenoid. Meanwhile, the portion of the coracoid closest to the glenoid is very expanded.Discovery and naming
Parapsicephalus is only definitely known from a single partial skull lacking the snout, but including a detailed endocast of the brain. It is catalogued under the specimen number GSM 3166, and is stored at the British Geological Survey in Keyworth, Nottinghamshire. It was collected in the 1880s by Reverend D.W. Purdon from the Loftus Alum Shale Quarry, in Loftus, North Yorkshire, from which fossils had been discovered as early as the early nineteenth century. The quarry has since become disused since operations ceased in 1860. The exposed rocks, which consist of pyrite-rich shales with calcareous concretions, are part of the upper Alum Shale Member of the Whitby Mudstone Formation, which has been dated to about 182 million years ago, or the Toarcian stage of the Jurassic period.GSM 3166 was described by Edwin Tulley Newton, who loaned it from Rev. Purdon, in 1888. He described it as a species of Scaphognathus, S. purdoni, named after Purdon; he did not include it in the type species S. crassirostris due to differences in the curvature of the top of the skull, as well as the midline channel on the top of the skull. In his description of the braincase, he noted its intermediate morphology between that of lizards and birds, which he considered evidence of a close relationship between birds, pterosaurs, and "reptiles". F. Plieninger subsequently compared GSM 3166 to Campylognathoides, and expressed that it was not as close to Scaphognathus as Newton had presumed. Later, in 1919, Gustav von Arthaber, based on the shape of the top of the skull, the elongated nostrils and prefrontal bones, the large antorbital fenestra and eye socket, the deep jugal, and the presence of seven teeth in the maxilla, referred GSM 3166 to the new genus Parapsicephalus.
Possible synonymy with ''Dorygnathus''
In 2003, David Unwin, Kenneth Carpenter, and others suggested that Parapsicephalus was actually closer to the roughly contemporaneous Dorygnathus from German deposits. Unwin formally renamed it to the new combination Dorygnathus purdoni. This renaming was adopted by some researchers but not others. However, a 2017 redescription of GSM 3166 noted a number of ways in which Dorygnathus differed from Parapsicephalus: the greater angle of the lacrimal process of the maxilla, the more reduced maxillary process of the premaxilla, the broader angle of the jugal beneath the eye socket, the overall thinner jugal relative to skull height, the more rounded the eye socket, the more oval-shaped supratemporal fenestra, and the convex top of the skull. On the basis of these characteristics, the study recognized Parapsicephalus as a distinct genus.Possible additional specimens
The specimen NHMUK PV R36634 was found in 2011 within a concretion in Saltwick Bay, which also belongs to the Alum Shale Member. It consists of a scapula, coracoid, and humerus; the head of the humerus was broken off during excavation as a result of the concretion being hammered open. Although it is impossible to refer this specimen to Parapsicephalus with confidence, its provenance and similarity to Dorygnathus were the basis of the tentative identification of the specimen as belonging to this genus. An additional possible specimen is a skull collected in 1994 from Altdorf, Bavaria, Germany, which bears great similarity to GSM 3166 and also preserves some additional elements. It is currently held by a private collector, but will soon be donated to an institution in the UK.Classification
Although Newton originally considered Parapsicephalus as being a species of Scaphognathus, Arthaber remarked that it was actually more similar to Dimorphodon instead. The prevailing view since Arthaber's renaming of Parapsicephalus as a distinct genus has been that Parapsicephalus represents some kind of rhamphorhynchid, although several phylogenies by Brian Andres and colleagues supported Arthaber's hypothesis of it being closely affiliated with Dimorphodon. Characters which support this placement include the convex top of the skull, the pear-shaped eye socket, the angle of the quadrate, and the thick jugal. The topology recovered by Andres and Myers in 2013, showing Parapsicephalus as a dimorphodontian, is reproduced below.A 2017 analysis of Parapsicephalus found little support for it being placed in the Dimorphodontia: its skull was comparatively longer; the snout is slightly upturned with outward-projecting teeth, as in rhamphorhynchids; the quadrate is not as vertical; the antorbital fenestra is offset below the nostril instead of being at the same level; and, although the top of the skull is convex in both, the condition in Parapsicephalus is not quite as extreme. Thus, affinities with the Rhamphorhynchidae were considered more probable. Within the Rhamphorhynchidae, unlike the scaphognathines, the antorbital fenestra is more than twice as long as it is tall, and has a concave back margin; the angle of the quadrate is also more than 120°. This implies that Parapsicephalus is a member of the Rhamphorhynchinae.
However, there are some factors that complicate a rhamphorhynchine position. In particular, the pear-shaped infratemporal fenestra and the overall size of the antorbital fenestra are more similar to scaphognathines than rhamphorhynchines. Additionally, like more basal non-rhamphorhynchid pterosaurs, there is a half moon-shaped process of the premaxilla extending beneath the nostril. It is thus possible that Parapsicephalus represents a basal rhamphorhynchid that is not in either group, which is not unexpected given its temporal context. The contemporary Allkaruen is also a potentially viable subject of comparison, although its material and that of Parapsicephalus do not readily overlap.