The advantages and disadvantages summarized below are further discussed in the [|Characteristics and principles of operation] section. See also the list of OFDM key features.
Further improves OFDM robustness to fading and interference.
Combat narrow-band interference.
Claimed OFDMA advantages
Flexibility of deployment across various frequency bands with little needed modification to the air interface.
Averaging interferences from neighbouring cells, by using different basic carrier permutations between users in different cells.
Interferences within the cell are averaged by using allocation with cyclic permutations.
Enables single-frequency network coverage, where coverage problem exists and gives excellent coverage.
Offers frequency diversity by spreading the carriers all over the used spectrum.
Allows per-channel or per-subchannel power.
Recognised disadvantages of OFDMA
Higher sensitivity to frequency offsets and phase noise.
Asynchronous data communication services such as web access are characterised by short communication bursts at high data rate. Few users in a base station cell are transferring data simultaneously at low constant data rate.
The complex OFDM electronics, including the FFT algorithm and forward error correction, are constantly active independent of the data rate, which is inefficient from power-consumption point of view, while OFDM combined with data packet scheduling may allow FFT algorithm to hibernate during certain time intervals.
The OFDM diversity gain and resistance to frequency-selective fading may partly be lost if very few sub-carriers are assigned to each user, and if the same carrier is used in every OFDM symbol. Adaptive sub-carrier assignment based on fast feedback information about the channel, or sub-carrier frequency hopping, is therefore desirable.
The fast channel feedback information and adaptive sub-carrier assignment is more complex than CDMA fast power control.
Characteristics and principles of operation
Based on feedback information about the channel conditions, adaptive user-to-subcarrier assignment can be achieved. If the assignment is done sufficiently fast, this further improves the OFDM robustness to fast fading and narrow-band cochannel interference, and makes it possible to achieve even better system spectral efficiency. Different numbers of sub-carriers can be assigned to different users, in view to support differentiated Quality of Service, i.e. to control the data rate and error probability individually for each user. OFDMA can be seen as an alternative to combining OFDM with time-division multiple access or time-domain statistical multiplexing communication. Low-data-rate users can send continuously with low transmission power instead of using a "pulsed" high-power carrier. Constant delay, and shorter delay, can be achieved. OFDMA can also be described as a combination of frequency-domain and time-domain multiple access, where the resources are partitioned in the time–frequency space, and slots are assigned along the OFDM symbol index, as well as OFDM sub-carrier index. OFDMA is considered as highly suitable for broadband wireless networks, due to advantages including scalability and use of multiple antennas -friendliness, and ability to take advantage of channel frequency selectivity. In spectrum sensing cognitive radio, OFDMA is a possible approach to filling free radio frequency bands adaptively. Timo A. Weiss and Friedrich K. Jondral of the University of Karlsruhe proposed a spectrum pooling system in which free bands sensed by nodes were immediately filled by OFDMA subbands.
Usage
OFDMA is used in:
the mobility mode of the IEEE 802.16 Wireless MAN standard, commonly referred to as WiMAX,
the now defunct Qualcomm/3GPP2 Ultra Mobile Broadband project, intended as a successor of CDMA2000, but replaced by LTE.
OFDMA is also a candidate access method for the IEEE 802.22 Wireless Regional Area Networks, a cognitive radio technology which uses white spaces in the televisionfrequency spectrum, and the proposed access method for DECT-5G specification which aims to fulfill IMT-2020 requirements for high-throughput mobile broadband and ultra reliable low latency applications.
