New York Central Hudson


The New York Central Hudsons were a series of 4-6-4 "Hudson" type steam locomotives built by the American Locomotive Company and the Lima Locomotive Works from 1927 to 1938 for the New York Central Railroad. Named after the Hudson River, the 4-6-4 wheel arrangement came to be known as the "Hudson" type in the United States as these locomotives were the first examples built and used in North America. Built for high-speed passenger train work, the Hudson locomotives were famously known for hauling the New York Central's crack passenger trains, such as the 20th Century Limited and the Empire State Express. With the onset of diesel locomotives in the mid 20th Century, all Hudson locomotives were retired and subsequently scrapped, with none preserved today except for a converted tender from J-1e 5313 which is preserved at the Steamtown National Historic Site in Scranton, Pennsylvania.

History

Although the Chicago, Milwaukee, St. Paul & Pacific Railroad was the first to design such locomotives, they were not built until after the NYC's Hudsons. NYC President Patrick E. Crowley named the units Hudsons after the Hudson River, which was in clear view from his office window.
The Hudson came into being because the existing 4-6-2 Pacific power was not able to keep up with the demands of longer, heavier trains and higher speeds. Given NYC's axle load limits, Pacific could not be made any larger; a new locomotive type would be required to carry the larger boilers. Lima Locomotive Works' conception of superpower steam as realized in the 2-8-4 Berkshire type was the predecessor to the Hudson. The 2-8-4's 4-wheel trailing truck permitted a huge firebox to be located after the boiler. The resulting greater steaming rate ensured that such a locomotive would never run out of power at speed, a common failing of older locomotives. Applying the ideas of the freight-minded Berkshire type to the Pacific resulted in a 4-6-4 locomotive.
NYC ordered prototype No. 5200 from Alco, and subjected it to intensive testing. A fleet of 205 J-1 class Hudsons were eventually built, including 30 each for the Michigan Central Railroad and the Cleveland, Cincinnati, Chicago & St. Louis Railway. In addition, NYC subsidiary Boston & Albany Railroad ordered 20 J-2 class, the latter 10 from Lima Locomotive Works. A later development were 50 J-3a class Super Hudsons in 1937–1938, with many modern appliances and innovations. After the MC, Big 4, and B&A locomotives were incorporated into the NYC numbering, the NYC Hudson locomotives had road numbers ranging from 5200 to 5474. The NYC J-1 road numbers were 5200-5344, the MC J-1s became NYC 5345-5374, the Big 4 J-1s became NYC 5375-5404, the J-2s became NYC road numbers 5455-5474, and the J-3 road numbers were 5405-5454. The J-2 numbers are last because they were transferred to the NYC after the J-3 deliveries.

The Commodore Vanderbilt - First Streamlined Steam Engine

The Hudsons were of excellent quality. In response to the styling sensation of the new diesel-powered Zephyr streamliner, Locomotive No. 5344 was fitted with an Art Deco streamlined shroud designed by Carl F. Kantola and was named Commodore Vanderbilt on December 27, 1934. The streamlining was later replaced to match the last ten J-3a locomotives that had been built with streamlining designed by Henry Dreyfuss. Two more J-3a locomotives had a 3rd streamlining style fitted in 1941 for Empire State Express service. The streamlined locomotives featured prominently on NYC advertising.
The forte of all Hudsons was power at top speed. They were poor performers at low speed and the presence of a booster engine on the trailing truck was an absolute necessity for starting. For this reason, they were generally favored by railroads with flat terrain and straight routes. After the NYC, the Milwaukee Road was also fond of the Hudsons, acquiring 22 class F6 and six streamlined class F7s. The Atchison, Topeka & Santa Fe Railway also had 16, while the New York, New Haven & Hartford Railroad had 10 streamlined I-5 4-6-4s built by Baldwin in 1937. Few railroads with hilly terrain acquired any.
A booster was prone to troubles, however, and gradually fell out of favor. Instead of a complicated booster, it was deemed preferential to have an extra pair of driving wheels, and thus better traction.
Trials of dual-purpose 4-8-2 Mohawks sealed the Hudson's fate. The Mohawk was nice, but it was still more suited to lower-speed hauling than high-speed power. In 1944, NYC received permission from the War Production Board to build a new, high-speed locomotive of the 4-8-4 type, combining all the advantages of the Hudson with those of the Mohawk. Many other railroads had taken to the 4-8-4 in the 1930s, generally calling them Northerns after the Northern Pacific Railway, which had first adopted them. By being a late adopter, the NYC had the chance to build on everyone else's experience. That locomotive proved to be exceptional, and the type on the NYC was named the Niagara. Since only 27 were built, however, they only took over the heaviest and most-prestigious trains; most Hudsons labored until the end of steam on NYC.
None of the NYC Hudson units survive; all were scrapped when the railroad dieselized. Two J-1 class Hudsons, numbers 5311 and 5313, were sold to the Toronto, Hamilton and Buffalo Railway in 1948 and were renumbered 501 and 502 respectively. Both locomotives were retired and scrapped in 1954. The tender from the 502 was retained by the TH&B and converted to a steam generator car for use on passenger trains. The generator car still survives today and is part of the Steamtown National Historic Site collection.

Popular culture

The Lionel Corporation has issued the Hudson in 1937, 1946, 1947, 1950, 1964, 1984, 1990, 2011 and 2019. The first model issued, in 1937, was made for special 'T-Rail' track and numbered 5344. It was also the first mass-produced scale model train, numbered '700e' by Lionel, with 'e' designating it as having an electronic reversing unit, or 'e unit'. The Hudson from 1946 and 1947, numbered 221 and made with Dreyfuss streamlining, was made in a grey paint scheme for the NYC railroad. It was the only grey steam locomotive produced by Lionel during the postwar years. The 1950 and 1964 version was for O-Gauge Tubular track and numbered 773. The 1987 Hudson was released for O-Gauge Tubular track and numbered 783. The 2011 'legacy' Hudson was numbered 5344 like the 1937 Hudson but made for O Gauge FasTrack, Tubular, or Atlas O Gauge track.
MTH has also issued the Hudson since the late 1980s and early 1990s.
Broadway Limited Imports built an HO scale version of the Dreyfuss Hudson in a brass-hybrid material for their Paragon 2 lineup. Complete with scullin wheels and prototype whistle, these models were sold alongside the NYC Niagra of the same model railroad scale. While MTH Dreyfuss Hudson HO scale models are somewhat abundant, BLI models are now a rarity, as BLI has discontinued the model.
The A.C. Gilbert Company produced the Hudson in their American Flyer S Gauge line from 1946 to 1964. This represented the standard J-3a configuration rather than any of the streamlined versions.
The Marx Toy Company produced a non-streamlined 1898 Hudson in their 027 style line from 1954 to 1963. In 1935 Marx released tinplate
toy trains in windup and electric named the Commodore Vanderbilt.