NEC RISCstation


The NEC RISCstation was a line of computer workstations made by NEC in the mid-1990s, based on MIPS RISC microprocessors and designed to run Microsoft Windows NT. A series of nearly identical machines were also sold by NEC in headless configuration as the RISCserver series, and were intended for use as Windows NT workgroup servers.

Historical development

The RISCstations were based on a modified Jazz architecture licensed from MIPS Computer Systems, Inc.. Although architecturally similar to contemporaneous Intel 80386-based personal computers, the RISCstations were faster than the Pentium-based workstations of the time.
Although based on the Jazz design, the RISCstations did not use the G364 framebuffer, instead using a S3 968-based video card or a 3Dlabs GLiNT-based adapter in a PCI slot.

Form factor

All RISCstations used a standard IBM AT-style tower or minitower case, a motherboard which also met the AT form factor standard, and PCI peripherals for peripheral expansion.

Operating systems

Several operating systems supported RISCstations.
Like all Jazz-based MIPS computers, the RISCstations ran the ARC console firmware to boot Windows NT in little-endian mode. The MIPS III architecture was capable of either little-endian or big-endian operation.
However, Microsoft stopped supporting the MIPS architecture in Windows NT after version 4.0. RISCstations ceased production in 1996.
In addition to Windows NT, NEC ported a version of Unix System V to the RISCstation.
Although support is lacking from Linux/MIPS for the RISCstation series, they are supported by NetBSD as NetBSD/arc and had been supported by OpenBSD, prior to the termination of the port in 1998.

Models

The RISCstation line included:
In March, 1995, a dual-CPU configuration of the RISCStation 2000 was priced at about $14,000, and came equipped with two 150 MHz MIPS R4400 CPUs, 64 MB of RAM, a 1 GB SCSI hard drive, a 3x CD-ROM drive and a 17-inch NEC-brand CRT monitor.