A monoblockLNB is a type of low-noise block downconverter used in communications satellite reception, this multiple combined LNBs is the simplest solution to achieve multifeed reception for two, three or four satellites. This design consists of two, three or four independent LNBs in a single case. The two, three or four LNBs can be automatically addressed with any DiSEqC 1.0 or higher receiver. In some cases, they can also be addressed with ToneBurst/MiniDiSEqC. However, they are only available for satellites with a fixed 3 degree, 4°, 4.3° or 6° other spacing. Most receivers which are sold nowadays are compatible with at least DiSeqC 1.0 which allows to switch automatically between 4 satellites, as user changes channel on remote control.
Availability Examples
In Europe, for example, there are monoblock single, twin and quad LNBs for the Ku band, which have a pre-defined spacing of 6 degrees. In March 2007, a new type of monoblock, called the Duo LNB was introduced by CanalDigitaal in the Netherlands for the simultaneous reception of Astra 19.2°E/Astra 23.5°E with a spacing of just 4.3 degrees. Unlike most other monoblocks, the Duo LNB was intended for use with 60 cm dishes. The Duo LNB is available in twin and quad versions. Triple monoblock LNBs are available in single, twin and quad versions. There are also available triple monoblock LNB units, which enable users to receive signals from three satellites: for example Hotbird 13°E, Eutelsat 16°E and Astra 19.2°E or the same can be used for positions: Eutelsat 7°E, Eutelsat 10°E and Hotbird 13°E. This monoblock can be used for other positions with the same spacing. Other very popular example for different spacing is: Astra 1: 19.2°E, Astra 3: 23.5°E and Astra 2: 28.2°E. And there are also available four feed monoblock LNB units, which enable users to receive signals from four satellites, for example Eurobird 9°E, Hotbird 13°E, Astra 19.2°E and Astra 23.5°E.
Multiband Monoblock
There are also existing Monoblock LNB to combine Ku-band LNBs with one of alternative band LNBs. Available bands are: Ka band that is: Ka-band LNBs or C band that is: C-band LNBs
Multiple Monoblock on one and the same dish
Two monoblock LNB can be put on the same dish using: Multi-satellite technique. However the result of such placing may be far from optimal. It may result in low level signal from some or all of satellites, but it can work in geographical favorable locations. Such monoblock LNBs can be connected by adding DiSEqC switch with compatibility of cascading, or they can be connected directly to different satellite tuners. Especially twin tuner with two separate inputs. However placing several separate single feed LNBs can lead to better results: more optimal signal levels.
Possibility of Developments
Current DiSEqC technology could allow to build monoblock LNB for even 16 satellites positions, but limiting factors are: market demands, and popularization of narrow directional beams among Tv stations broadcasters who does not really want too broad audiences despite much better relative carbon footprint in this case. Other limiting factor is that for monoblock for 16 satellites positions special shape of antena dish should be used, and that also limits markets possibility. Using DiSEqC 1.1 7-8 satellites positions from 24° spacing could be addressed and received with a lot of success by standard size and shape dish in some densely populated parts of globe. The cheapest way would be to expand triple feed 3° monoblock design to encompass additional satellite positions as there are planty 3° separated satellites. The greatest problem is to design thin 2°,1°or 0.5° monoblock. If that obstacle could be cheaply omitted there would be no limit to design large matrix of multiple LNBs into monoblock LNB. Another limiting factor is low awareness by general population and satellite reception users of Multi Feed Multi satellite, and the fact that it is so easily possible. That awareness is further crippled by the fact that DiSEqC and therefore Monoblock is not compatible with satellite channel router or unicable LNBs in a single cable distribution. So users needs to decide among using multiple receivers trough single cable distribution with single unicable LNB or using Multi Feed Multi-satellite reception by Monoblock LNB in twin and quad versions but with two or four cables leaded and plugged to each of receivers for multiroom experience. A lot of general population in a lot of countries does not know even that Free To Air satellite or even terrestrial broadcast exist and are sticking with paid cable tv providers out of convenience. A state that is highly promoted by paid Tv.
