Maryland Route 404


Maryland Route 404 is a major highway on Maryland's Eastern Shore in the United States. It runs from MD 662 in Wye Mills on the border of Queen Anne's and Talbot counties, southeast to the Delaware state line in Caroline County, where the road continues as Delaware Route 404 to Five Points. The Maryland and Delaware state highways together cross the width of the Delmarva Peninsula and serve to connect the cities west of the Chesapeake Bay by way of the Chesapeake Bay Bridge and U.S. Route 50 with the Delaware Beaches. Along the way, MD 404 passes through mostly farmland and woodland as well as the towns of Queen Anne, Hillsboro, and Denton. The route is a four-lane divided highway between US 50 and east of Denton, with the remainder of the route a two-lane undivided road.
MD 404 was designated by 1933 to run from Matapeake, east along present-day MD 8, US 50, and MD 662 to Wye Mills, where it followed its current routing to the Delaware border. By 1946, the route’s western terminus was moved to MD 2 north of Annapolis, where it headed east across the Chesapeake Bay on the Sandy Point-Matapeake ferry. The western terminus was cut back to Wye Mills in 1949, having been replaced by US 50 west of there. The route was realigned to bypass Queen Anne and Hillsboro in 1960 and Denton in 1987.
Since MD 404 is the main route for travelers between the Chesapeake Bay Bridge and the Delaware Beaches, the road has a high accident rate. To improve on this situation, the Maryland State Highway Administration planned to widen the two-lane portions of the route into a four-lane divided highway. A portion of the road east of Tuckahoe Creek in Caroline County received $7.7 million for widening as a part of the stimulus bill signed into law by President Barack Obama in 2009; this section was widened in 2012. Widening on the remainder of MD 404 between US 50 and Denton was completed in November 2017.

Route description

MD 404 begins at an intersection with MD 662 in Wye Mills on the border of Queen Anne's and Talbot Counties, heading to the east on Queen Anne's Highway, a two-lane undivided road. It heads east through farmland along the Queen Anne's/Talbot County border before reaching an intersection with US 50. This intersection has park and ride lots on the northwest and northeast corners. From here, MD 404 continues east through farmland with some residences and wooded areas as a four-lane divided highway, approaching the town of Queen Anne.
Further east, Old Queen Anne Road splits from MD 404 at an eastbound right-in/right-out intersection, with MD 404 crossing entirely into Queen Anne's County. It resumes east through some farmland before coming to an intersection with MD 309. Past MD 309, the route intersects the northern terminus of MD 303, which intersects the route at a right-in/right-out intersection with the eastbound lanes of MD 404. From MD 303, the road enters wooded areas adjacent to Tuckahoe State Park, heading across an abandoned railroad grade owned by the Maryland Department of Transportation, before crossing the Tuckahoe Creek.
MD 404 enters Caroline County upon crossing the Tuckahoe Creek, where it becomes Shore Highway. It emerges from the woods into agricultural areas, intersecting MD 480 near Hillsboro. Past that intersection, the route heads through a mix of woods and residences before intersecting MD 404 Alt., where MD 404 heads into a mix of farms and woodland. Unsigned MD 485 loops to the south of MD 404, returning to the route before the intersection with the southern terminus of MD 312. The route continues to the southeast through farms, heading toward Denton. As the road approaches Denton, it heads through rural areas with some residences and businesses. MD 404 Bus. splits from MD 404 to head through the center of Denton while MD 404 continues east to bypass Denton to the north.
The route continues east through fields before intersecting MD 328. Past this intersection, MD 404 crosses over the Choptank River on the Governor Harry R. Hughes Bridge. It continues east as a limited-access road with a diamond interchange at MD 313 and MD 619, where some businesses are located. MD 313 forms a concurrency with MD 404 and the two routes turn south, heading along the eastern side of Denton through woodland and then past residential neighborhoods. It turns to the southwest, heading into woods and intersecting MD 404 Bus. at an at-grade intersection. MD 313 and MD 404 continue as a surface road that turns south and heads through some commercial areas.
The road heads south into farmland, passing east of Martinak State Park. It crosses over Watts Creek and comes to an intersection with MD 16, with that route joining MD 313 and MD 404 for a three-way concurrency. The three routes continue southeast, narrowing into a two-lane undivided road that heads through a mix of woods and farms with some homes. The road turns more to the east-southeast, with MD 313 splitting from MD 16 and MD 404 by heading south on Federalsburg Highway in Andersontown. The road turns southeast and in a short distance, MD 16 splits from MD 404 by heading east on Greenwood Road. Past this intersection, MD 404 continues southeast through farmland and woodland to the Delaware border, where the road continues as DE 404, which runs east to an intersection with DE 1 in Five Points.
East of US 50, MD 404 serves as part of the main route connecting the Chesapeake Bay Bridge and the Baltimore-Washington Metropolitan Area to the Delaware Beaches. MD 404 is a part of the main National Highway System for its entire length except for the portion from MD 662 to US 50 in Wye Mills.

History

By 1921, what would become MD 404 was built as a state highway within Queen Anne, from Hillsboro to a point between Hillsboro and Denton, and between West Denton and Denton. The state highway between Queen Anne and Denton was completed by 1927. By 1933, MD 404 was designated onto a state highway between Matapeake, where the Annapolis-Matapeake ferry across the Chesapeake Bay connected the route to Annapolis in Anne Arundel County, and the Delaware border southeast of Denton. The route headed east across Kent Island to Queenstown, where it turned southeast to Wye Mills and continued east through Queen Anne, Hillsboro, and Denton. By 1946, the route's western terminus was moved to MD 2 north of Annapolis in Anne Arundel County, crossing the Chesapeake Bay on the Sandy Point-Matapeake ferry, roughly where the Chesapeake Bay Bridge is now, and continuing west through Skidmore to MD 2. MD 404 was rerouted to bypass Wye Mills in 1948, with part of the former alignment through the community becoming part of MD 662.
A year later, the western terminus of MD 404 was moved to MD 662 in Wye Mills. West of Wye Mills, the route was replaced by an extended US 50. The former alignment of MD 404 west of Wye Mills is now the US 50 approaches to the Chesapeake Bay Bridge, with the part between Matapeake and Stevensville now a part of MD 8. In 1950, MD 404 was rerouted to bypass Queen Anne and Hillsboro to the north, with the former alignment now Old Queen Anne Road and MD 404 Alt. A portion of the route between Hillsboro and Denton was bypassed in 1960. This former alignment of MD 404 is now known as Saathoff Road and has the unsigned MD 485 designation. In 1972, MD 404 and MD 313 were relocated to a one-way pair, eastbound Franklin Street and westbound Gay Street, through Denton. The routes previously headed south out of Denton on Sixth Street and Fifth Avenue. The former alignment along Sixth Street became MD 619 by 1978. In the early 1980s, construction began to widen MD 404 to a divided highway. By 1985, construction was underway for the four-lane divided bypass of Denton between MD 404 west of Denton and MD 313 north of Denton. In 1987, MD 313 and MD 404 were rerouted to bypass Denton along the newly completed four-lane divided bypass. The former alignment of MD 404 through Denton became MD 404 Bus.
The Maryland State Highway Administration worked on improvements to MD 404 in order to provide relief to travelers driving to the ocean resorts, notably by widening the remainder of the route into a four-lane divided highway. The primary motive behind the widening was the high accident rate that plagued the two-lane road, brought on by beach traffic. The divided highway portion of MD 404 in the Denton area was extended further in the 2000s from the south end of Denton to the Sennett Road intersection east of where MD 16 joins the route. The section between south of Legion Road and Double Hills Road was widened in 2005 while the section between Double Hills Road and Sennett Road was widened in 2007. This project received $3 million from the federal government in 2001. As part of the American Recovery and Reinvestment Act of 2009 signed into law by President Barack Obama on February 17, 2009, $7.7 million went to widening a portion of MD 404 east of Tuckahoe Creek in Caroline County, creating 221 jobs. The widening of this section was completed in 2012. On May 21, 2014, groundbreaking took place to widen MD 404 between west of MD 309 and Cemetery Road. The project to widen this section of will cost a total of $39 million. On June 25, 2015, Governor Larry Hogan announced that state funding would be allocated to finish widening MD 404 between US 50 and Denton, among other projects across the state. A total of $160 million in funds would go to widening MD 404. Widening of the section between west of MD 309 and Cemetery Road was completed in summer 2017. Widening of the remaining sections of MD 404 between US 50 and Denton was completed on November 20, 2017, with Governor Hogan in attendance for a ribbon-cutting ceremony.
On May 29, 2011, the Route 404 Memorial Garden, located near Denton, was dedicated, honoring those who were killed in car accidents along MD 404. The memorial consists of a flagpole surrounded by a circular path with bricks bearing the names of people who died along the route.

Junction list

Related routes

Hillsboro alternate route

Maryland Route 404 Alternate is a long alternate route of MD 404 in Talbot and Caroline counties. The route runs along the former alignment of MD 404 through the towns of Queen Anne and Hillsboro. The route begins at an intersection with MD 309 near Queen Anne, Talbot County, where it heads east on two-lane undivided Millsboro Denton Road. West of MD 309, Old Queen Anne Road continues west to MD 404. MD 404 Alt. passes through woodland, crossing under an abandoned railroad grade owned by the Maryland Department of Transportation before coming to MD 303. At this point, the route turns north to form a concurrency with MD 303 along Talbot Avenue, and the two routes enter Queen Anne as it turns to the east. MD 303 splits from MD 404 Alternate by turning north on Main Street, while MD 404 Alt. continues east past homes, intersecting MD 518. As the road runs a short distance to the south of the Tuckahoe Creek, there is an industrial building on the south side of the road. Upon crossing the Tuckahoe Creek, MD 404 Alt. enters Hillsboro in Caroline County and becomes Hillsboro Road. The route continues through residential areas of the town. Upon leaving Hillsboro, the road heads into agricultural areas with a few homes and a patch of woods. MD 404 Alt. ends at an intersection with MD 404 east of Hillsboro.
Junction list

Denton business loop

Maryland Route 404 Business is a long business route of MD 404 through the town of Denton in Caroline County. The route runs along the former alignment of MD 404 that was bypassed by the divided, four-lane Denton Bypass. MD 404 Bus. branches off from MD 404 west of Denton by heading southeast on a two-lane divided road called Meeting House Road that soon becomes undivided as it passes through farmland with some businesses. As it comes to MD 328 in West Denton, the route passes near residences. The road crosses the Choptank River into Denton, where it becomes Franklin Street. Shortly after the river, MD 404 Bus. splits into a one-way pair that follows Franklin Street eastbound and Gay Street westbound, with Market Street running between Franklin and Gay streets. The one-way pair, which has two lanes in each direction, carries the route through the residential and commercial downtown of Denton, with the westbound direction passing north of the Caroline County Courthouse. East of the downtown area, the one-way pair intersects MD 619. In the eastern part of Denton, the two directions of MD 404 Bus. turn south and join again, becoming a four-lane divided highway with the Franklin Street name that runs through woodland. MD 404 Bus. ends at MD 313 and MD 404 a short distance later.
Junction list

Auxiliary routes