Marine sandglass


A marine sandglass is a timepiece of simple design that is a relative of the common hourglass, a marine instrument known since the 14th century. They were employed to measure the time at sea or on a given navigational course, in repeated measures of small time increments. Used together with the chip log, smaller marine sandglasses were also used to measure the boat speed through the water in knots.
Although vital to maritime navigation, marine sandglasses were not accurate measuring instruments for the passage of time; many design and environmental factors could affect the duration of sand's flow, and therefore its reported time. Their use continued through the early 19th century, when they were supplanted by reliable mechanical timepieces, and by other advances in marine navigation.
Marine sandglasses were very popular on board ships, as they were the most dependable measurement of time while at sea. Unlike the clepsydra, the motion of the ship while sailing did not affect the hourglass. The fact that the hourglass also used granular materials instead of liquids gave it more accurate measurements, as the clepsydra was prone to get condensation inside it during temperature changes. In conjunction with a record of a ship's speed and direction, seamen used the hourglass to determine their position with reasonable accuracy.

Design and use

Marine sandglasses originally consisted of two glass bottles one inverted above the other, connected by a small tube, with the ends wrapped and so joined together. Over time, the later progress in the art of glassblowing allowed them to be made in a single piece. The marine glass was filled with sand or a suitable material such as finely ground eggshell, lead or tin chips. This flowing material was chosen with two main objectives: to avoid the humidity and to absorb motion, both required for shipboard use.
Placed in the upper half, the sand would flow slowly and steadily towards the lower half by the action of gravity, taking a certain time to empty. Once the upper portion of the glass was empty, the glass could be turned to measure another time period.

History

Antiquity

The origin of the hourglass is unclear, although unlike its predecessor the clepsydra, or water clock, which may have been invented in ancient Egypt, the first referenced use:
From the Roman time it disappears completely from historical records until it is re-introduced in medieval Europe. By the 8th century it is mentioned by a monk named Luitprand, who served at the cathedral of Chartres, France. But it was not until the 14th century that the marine sandglass was seen commonly, the earliest firm evidence being a depiction in the 1338 fresco Allegory of Good Government by Ambrogio Lorenzetti.
Use of the marine sandglass has been recorded since the 14th century; The written records about it were mostly from logbooks of European ships. In the same period it appears in other records and lists of ships stores. The earliest recorded reference that can be said with certainty to refer to a marine sandglass dates from c. 1345, in a receipt of Thomas de Stetesham, clerk of the King's ship La George, in the reign of Edward III of England; translated from the Latin, the receipt says: in 1345:
The same Thomas accounts to have paid at Lescluse, in Flanders, for twelve glass horologes, price of each 4½ gross', in sterling 9s. Item, For four horologes of the same sort, bought there, price of each five gross', making in sterling 3s. 4d.

Another reference is found in an extensive inventory of the property of Charles V of France in his possession at the time of his death on September 16, 1380. One item is an hourglass from the king's study at his castle of St. Germain en Laye, described as follows:
This "orloge de mer" or "heures de naviguer" was sent to him, as a present, when he still was a prince, by his aunt Yolande of Aragon, when asking him for a manuscript of John de Mandeville, to be translated to the Aragonese tongue.
The most interesting thing about the second reference, the one from King Charles, is that a common sand-glass is defined as "ung grant orloge de mer" or "a large sea clock", this together with the fact that the first explanation of its use at sea appears in the Francesc Eiximenis work "lo dotzé del crestià" and that was given to him as a present by his aunt Yolande of Aragon, suggests that, at this period, the importance of a sand-glass was more commonly related to its use at sea and its fabrication demand may have been originated from the navigational needs from the Crown of Aragon a maritime power of the moment in the Mediterranean.

Importance in navigation

In long-distance navigation through the open ocean, the sandglass or "glass" used to measure the time was a tool as important as the compass. Filled with the amount of sand suitable for measuring a lapse of half an hour, each time the sand emptied was also called a "glass"; eight glasses defined a "watch". The times determined by the sandglass, along with the record in the logbook of the speed measured with the "chip log", permitted the ship's navigator to plot his map position. Multiplying the ship's speed by the time the course had been kept, gave traveled distance, a simple, overall method termed dead reckoning.
The marine sandglass was critical for maritime navigation before the 19th century. At the beginning of that century it became possible to navigate by the lunar distances, thanks to the tables of haversines of Joseph de Mendoza y Ríos. Prior to this, dead reckoning navigation based on sandglass-determined times was used, alongside determination of latitude using the quadrant ; this was the only system available to mariners to navigate the globe. The parallel use of relative time measurements at sea, and time measurement by mechanical clocks on land continued from at least 1350 to 1805, i.e., for more than 450 years.
Although vital to navigation, the marine glass was not an accurate instrument to measure the passage of time. The design of the glass affected its accuracy in time measurement; the uniformity in fineness of the sand, the inner diameter of the connecting tube, and design aspects allowing wear that would effect the flow of sand all could contribute. In addition, many shipboard factors could affect the duration of sand's flow and therefore influence the time measured, including the humidity inside the glass, the ability for it to be positioned in a perfectly vertical position, and the acceleration or deceleration of the ship's movements. Finally, the use of short duration glasses to measure long periods of time introduced further error. Marine glass use was supplanted by reliable mechanical timepieces, and by other advances in marine navigation.

Watch sandglasses

Watch sandglasses were used on ships to measure watch times, typically in half-hour periods. The helmsman or ship's page were the crewmen responsible for turning the watch sandglass, thus supplying the time to be registered on the ship's log; watch measurement began with the sun reaching its highest point—its zenith—at midday, which was likewise the essential time reference point for navigation. At that point in time, the ship's bell was struck eight times; after the first glass had emptied, the ship's bell was struck once, after another glass, twice, and so on until four hours after midday, when it was again struck eight times. At that point, a new watch began, and the sequence was repeated.
Hence, in the voyages of Columbus, there are records that his crew logged the passage of time using a half-hour "ampolleta" that was turned every time it emptied to keep track of the "canonical" hours. Likewise, during the voyage of Ferdinand Magellan to circumnavigate the globe, 18 hourglasses from Barcelona were in the ship's inventory, after the trip being authorized by emperor Charles V.

Ship-log sandglass

From the 16th century a much smaller 30-second "glass" was used along with the chip log, to measure the speed of the vessel over the water. The procedure was as follows: