MPEG Surround, also known as Spatial Audio Coding is a glossycompressionformat for surround sound that provides a method for extending mono or stereo audio services to multi-channel audio in a backwards compatible fashion. The total bit rates used for the core and the MPEG Surround data are typically only slightly higher than the bit rates used for coding of the core. MPEG Surround adds a side-information stream to the core bit stream, containing spatial image data. Legacy stereo playback systems will ignore this side-information while players supporting MPEG Surround decoding will output the reconstructed multi-channel audio. Moving Picture Experts Group issued a call for proposals on MPEG Spatial Audio Coding in March 2004. The group decided that the technology that would be the starting point in standardization process, would be a combination of the submissions from two proponents - Fraunhofer IIS / Agere Systems and Coding Technologies / Philips. The MPEG Surround standard was developed by the Moving Picture Experts Group and published as ISO/IEC 23003 in 2007. It was the first standard of MPEG-D standards group, formally known as ISO/IEC 23003 - MPEG audio technologies. MPEG Surround was also defined as one of the MPEG-4 Audio Object Types in 2007. There is also the MPEG-4 No Delay MPEG Surround object type, which was published in 2010. The Spatial Audio Object Coding was published as MPEG-D Part 2 - ISO/IEC 23003-2 in 2010 and it extends MPEG Surround standard by re-using its spatial rendering capabilities while retaining full compatibility with existing receivers. MPEG SAOC system allows users on the decoding side to interactively control the rendering of each individual audio object. There is also the Unified Speech and Audio Coding which will be defined in MPEG-D Part 3 - ISO/IEC 23003-3 and ISO/IEC 14496-3:2009/Amd 3. MPEG-D MPEG Surround parametric coding tools are integrated into the USAC codec. The core could be coded with any audio codec. Particularly low bitrates are possible when using HE-AAC v2 as the core codec.
MPEG Surround coding uses our capacity to perceive sound in the 3D and captures that perception in a compact set of parameters. Spatial perception is primarily attributed to three parameters, or cues, describing how humans localize sound in the horizontal plane: Interaural level difference, Interaural time difference and Interaural coherence. This three concepts are illustrated in next image. Direct, or first-arrival, waveforms from the source hit the left ear at time, while direct sound received by the right ear is diffracted around the head, with time delay and level attenuation, associated. These two effects result in ITD and ILD are associated with the main source. At last, in a reverberant environment, reflected sound from the source, or sound from diffuse source, or uncorrelated sound can hit both ears, all of them are related with IC.
Description
MPEG Surround uses interchannel differences in level, phase and coherence equivalent to the ILD, ITD and IC parameters. The spatial image is captured by a multichannel audio signal relative to a transmitted downmix signal. These parameters are encoded in a very compact form so as to decode the parameters and the transmitted signal and to synthesize a high quality multichannel representation. MPEG Surround encoder receives a multichannel audio signal,x1 to xN where the number of input channels is N. The most important aspect of the encoding process is that a downmix signal, xt1 and xt2, which is typically stereo, is derived from the multichannel input signal, and it is this downmix signal that is compressed for transmission over the channel rather than the multichannel signal. The encoder may be able to exploit the downmix process so as to be more advantageous. It not only creates a faithful equivalent of the multichannel signal in the mono or stereo downmix, but also creates the best possible multichannel decoding based on the downmix and encoded spatial cues as well. Alternatively, the downmix could be supplied externally. The MPEG Surround encoding process could be ignored by the compression algorithm used for the transmitted channels. It could be any type of high-performance compression algorithms such as MPEG-1 Layer III, MPEG-4 AAC or MPEG-4 High Efficiency AAC, or it could even be PCM.
Legacy compatibility
The MPEG Surround technique allows for compatibility with existing and future stereo MPEG decoders by having the transmitted downmix appear to stereo MPEG decoders to be an ordinary stereo version of the multichannel signal. Compatibility with stereo decoders is desirable since stereo presentation will remain pervasive due to the number of applications in which listening is primarily via headphones, such as portable music players. MPEG Surround also supports a mode in which the downmix is compatible with popular matrix surround decoders, such as Dolby Pro-Logic.
Due to the relatively small channel bandwidth, the relatively large cost of transmission equipment and transmission licenses and the desire to maximize user choices by providing many programs, the majority of existing or planned digital broadcasting systems cannot provide multichannel sound to the users. DRM+ was designed to be fully capable of transmitting MPEG Surround and such broadcasting was also successfully demonstrated. MPEG Surround's backward compatibility and relatively low overhead provides one way to add multichannel sound to DAB without severely reducing audio quality or impacting other services.
Currently, the majority of digital TV broadcasts use stereo audio coding. MPEG Surround could be used to extend these established services to surround sound, as with DAB.
Music download service
Currently, a number of commercial music download services are available and working with considerable commercial success. Such services could be seamlessly extended to provide multichannel presentations while remaining compatible with stereo players: on computers with 5.1 channel playback systems the compressed sound files are presented in surround sound while on portable players the same files are reproduced in stereo.
Many Internet radios operate with severely constrained transmission bandwidth, such that they can offer only mono or stereo content. MPEG Surround Coding technology could extend this to a multichannel service while still remaining within the permissible operating range of bitrates. Since efficiency is of paramount importance in this application, compression of the transmitted audio signal is vital. Using recent MPEG compression technology, full MPEG Surround systems have been demonstrated with bitrates as low as 48 kbit/s.
