List of software-defined radios
This article provides a list of commercially available software-defined radio receivers.
Name | Type | Frequency range | Max bandwidth | RX ADC bits | TX DAC bits | TX capable | Sampling rate | Frequency accuracy ppm | Panadapters / Receivers | Host Interface | Windows | Linux | Mac | FPGA | Base price |
Aaronia SPECTRAN V6 | Pre-built | 10 MHz – 6 GHz | Up to 490 MHz | 16 | 14 | 2 GSPS | 0.005 | 2/1/3 | Embedded or True IQ data via 2 x USB 3.2 Gen1, 1 x USB 3.1 GEN2, Internet remote via RTSA Software | XC7A200T-2 | |||||
ADAT ADT-200A | Pre-built | 10 kHz – 30 MHz | 0.5 – 100 kHz | ? | ? | 1/3 | Embedded system, USB, Internet remote | , with option R-1 & ADAT Commander | ? | ? | |||||
AD-FMCOMMS2-EBZ | Pre-built | 2400 – 2500 MHz | 12 | 12 | 61.44 MSPS | 2/2 | FMC then USB 2.0 or Gigabit Ethernet. | ||||||||
AD-FMCOMMS3-EBZ | Pre-built | 70 MHz – 6 GHz | 54 MHz due to filter | 12 | 12 | 61.44 MSPS | 2/2 | FMC then USB 2.0 or Gigabit Ethernet. | |||||||
AD-FMCOMMS4-EBZ | Pre-built | 70 MHz – 6 GHz | 54 MHz due to filter | 12 | 12 | 61.44 MSPS | 1/1 | FMC then USB 2.0 or Gigabit Ethernet. | |||||||
AD-FMCOMMS5-EBZ | Pre-built | 70 MHz – 6 GHz | 54 MHz due to filter | 12 | 12 | 61.44 MSPS | 4/4 | FMC then USB 2.0 or Gigabit Ethernet. | |||||||
ADALM-PLUTO | Pre-built | 325 MHz – 3.8 GHz | 20 MHz | 12 | 12 | 61.44 MSPS | 1/1 | USB 2.0, Ethernet & WLAN with USB-OTG adapter | Xilinx Zynq Z-7010 | ||||||
AFEDRI SDR | Pre-built | 30 kHz – 35 MHz, 35 MHz – 1700 MHz | 2.3MHz | 12 | 80 MSPS | 0/2 | USB 2.0, 10/100 Ethernet | ||||||||
AirSpy R2 | Pre-built | 24 – 1700 MHz | 10 MHz | 12 | N/A | 10 MSPS MSps ADC sampling, up to 80 MSPS for custom applications | 0.5 | 0/1 | USB | using ports | none | ||||
AirspyHF+ | Pre-built | 9 kHz - 31 MHz 60 MHz - 260 MHz | 660 kHz | 18 | N/A | 36 MSPS | 0.5 | 0/1 | USB | ||||||
Apache Labs ANAN-10E | Pre-built | 10 kHz – 55 MHz | 14 | ? | 10W | 122.88 Msps | 0/2 | Gigabit Ethernet | |||||||
Apache Labs ANAN-10/100 | Pre-built | 10 kHz – 55 MHz | 16 | ? | 10/100W | 122.88 Msps | 0/4 | Gigabit Ethernet | - | ||||||
Apache Labs ANAN-100D/200D | Pre-built | 10 kHz – 55 MHz | 16 | ? | 100W | 122.88 Msps | 0/7 | Gigabit Ethernet | - | ||||||
Apache Labs ANAN-7000DLE | Pre-built | 9 kHz – 60 MHz | 16 | 16 | 100W | ? | 0/7 | Gigabit Ethernet | |||||||
Apache Labs ANAN-8000DLE | Pre-built | 0 kHz - 61.44 MHz | 16 | 16 | 200W | ? | 0/7 | Gigabit Ethernet | Altera Cyclone IV | ||||||
AOR AR-2300 | Pre-built | 40 kHz – 3.15 GHz | ? | N/A | 65 MSPS | 1/1 | Embedded system, USB | ? | ? | ||||||
ARSP / Wideband MIMO | early kit / pre-built | 400 MHz – 4.4 GHz | ? | ? | 8 MHz streaming / 50 MHz | ? | USB 2.0 | ||||||||
ASR-2300 | Pre-Built / Open Source Design | 300 MHz – 3.8 GHz, two general wideband RX and selectable GPS, ISM, PCS, UHF RX bands | ? | ? | <40 MHz | 0/2 | USB 3.0 SuperSpeed | ||||||||
Bitshark Express RX | Kit | 300 MHz – 4 GHz | ? | 105 MSPS | 0/1 ? | PCIe | ? | ||||||||
bladeRF | Pre-built | 300 MHz – 3.8 GHz | 12 | 12 | 80 kSPS – 40 MSPS | 1 | ? | USB 3.0 SuperSpeed | Altera Cyclone 4 E | ||||||
bladeRF 2.0 micro | Pre-built | 47 MHz – 6 GHz | 56 MHz | 12 | 12 | 61.44 MSPS | 2/2 | USB 3.0 SuperSpeed | Altera Cyclone V | ||||||
ColibriDDC | Pre-built | 10 kHz – 62.5 MHz, up to 800 MHz | 38 – 312 kHz | 14 | N/A | 125 MSPS | 3/4 | 10/100 Ethernet | ? | ||||||
COM-3011 | Pre-built | 20 MHz – 3 GHz | ext | External ADC required | ? | USB | ? | ? | |||||||
Crimson TNG | Pre-built | DC – 6 GHz | > 1200 MHz | 16 | 16 |
| 4/4 | 2x 10Gbit/s SFP+, Ethernet | |||||||
Cross Country Wireless SDR receiver v. 3 | Pre-built | 472 – 479 kHz,7.0–7.3 MHz/10.10–10.15 MHz, and 14.00–14.35 MHz | ext | External ADC required | 1/1 | Crystal controlled two channels | |||||||||
Cyan | Pre-built | 100 kHz – 18 GHz | 1 – 3 GHz | 16 | 16 |
| 1 – 16 receive and 1 – 16 transmit | 4x 40Gbit/s QSFP, Ethernet | Intel Stratix 10 SoC | ||||||
DRB 30 | Pre-built | 30 kHz – 30 MHz | ext | External ADC required | ? | LPT parallel port | Up to XP | ? | ? | ||||||
DX Patrol | Pre-built | 100 kHz – 2 GHz | 8 | 2.4 Msps | ? | USB | ? | ? | |||||||
easySDR USB Dongle | Pre-built | 64 – 1700 MHz | ? | N/A | 48, 96 kHz | 0/1 | USB | ||||||||
Elektor SDR | Bare PCB and pre-built | 150 kHz – 30 MHz | ? | Soundcard ADC: 48, 96, and 192 kHz | 0/1 | USB | - for PCB | ||||||||
Elektor AVR SDR | Kit and pre-built | up to 1 MHz in undersampling | ? | up to 15 kS/s | 0/1 | UART via RS2-232 converter or USB bridge | - | ||||||||
ELAD FDM-S1 | Pre-built | 20 kHz – 30 MHz, up to 200 MHz in undersampling | 192 – 3072 kHz | 14 | N/A | 61.44 MHz | 1/4 | USB | Xilinx | ||||||
ELAD FDM-S2 | Pre-built | HF:9 kHz – 52 MHz / FM:74 MHz - 108 MHz / VHF:135 MHz - 160 MHz | 192 kHz – 6 MHz | 16 | N/A | 122.88 MHz | 1/8 | USB 2.0 | Xilinx Spartan-6 | ||||||
ELAD FDM-DUO | Pre-built | HF:10 kHz – 54 MHz | 192 kHz – 6 MHz | 16 | ? | 122.88 MHz | 1/8+1 | Embedded system + 3x USB 2.0 | Xilinx Spartan-6 | ||||||
Elecraft KX3 | Pre-built or kit | 0.5 – 54 MHz | 14 | ? | 30 kHz? | 0/1 | USB or embedded system | ||||||||
FiFi-SDR | Pre-built | 200 kHz – 30 MHz | ? | 96 kHz | 0/1 | USB | ? | ||||||||
FLEX-6700 | Pre-built | 0.01 – 73, 135 – 165 MHz | 24-192kHz RX, 14MHz Display | 16 | 16 | 100W | 245.76 MSPS | 8/8 | Gigabit Ethernet | Xilinx XC6VLX130T | |||||
CDRX-3200 | Pre-built | 0.01 – 100 MHz | 48 – 250 kHz RX | 24 | 48-250 kSPS | 0/32, coherent or independent | Gigabit Ethernet | through API | through API | through API | Xilinx XC5VLX30T | ||||
LBRX-24 | Pre-built | 950 – 2150 MHz | 150 kHz – 80 MHz | 16 | 150 kSPS – 80 MSPS | 0/24 | 10 Gigabit Ethernet | through API | through API | through API | Xilinx XC6VHX380T | ||||
FLEX-6700R | Pre-built | 0.01 – 73, 135 – 165 MHz | 24 – 192 kHz RX, 14 MHz Display | 16 | 245.76 MSPS | 8/8 | Gigabit Ethernet | Xilinx XC6VLX130T | |||||||
FLEX-6600M | Pre-built | 0.01 – 54 MHz | 24 – 192 kHz RX, 14 MHz Display | 16 | 16 | 100W | 245.76 MSPS | 4/4 | Gigabit Ethernet | Xilinx XC6VLX130T or XC7A200T | |||||
FLEX-6600 | Pre-built | 0.01 – 54 MHz | 24 – 192 kHz RX, 14 MHz Display | 16 | 16 | 100W | 245.76 MSPS | 4/4 | Gigabit Ethernet | Xilinx XC6VLX130T or XC7A200T | |||||
FLEX-6500 | Pre-built | 0.01 – 73 MHz | 24 – 192 kHz RX, 14 MHz Display | 16 | 16 | 100W | 245.76 MSPS | 4/4 | Gigabit Ethernet | Xilinx XC6VLX75T | |||||
FLEX-6400M | Pre-built | 0.01 – 54 MHz | 24 – 192 kHz RX, 7 MHz Display | 16 | 16 | 100W | 122.88 MSPS | 2/2 | Gigabit Ethernet | Xilinx XC6VLX75T or XC7A200T | |||||
FLEX-6400 | Pre-built | 0.01 – 54 MHz | 24 – 192 kHz RX, 7 MHz Display | 16 | 16 | 100W | 122.88 MSPS | 2/2 | Gigabit Ethernet | Xilinx XC6VLX75T or XC7A200T | |||||
FLEX-6300 | Pre-built | 0.01 – 54 MHz | 24 – 192 kHz RX, 14 MHz Display | 16 | 16 | 100W | 122.88 MSPS | 2/2 | Gigabit Ethernet | ||||||
FLEX-5000A | Pre-built | 0.01 – 65 MHz | 48 – 192 kHz | 24 | 24 | 100W | 48, 96, 192 kHz | 2/2 | 1394a Firewire | ||||||
FLEX-3000 | Pre-built | 0.01 – 65 MHz | 48 – 96 kHz | 24 | 24 | 100W | 48, 96 kHz | 1/1 | 1394a Firewire | ||||||
FLEX-1500 | Pre-built | 0.01 – 54 MHz | 48 kHz | 16 | 16 | 5W | 48 kHz | 1/1 | USB | ||||||
FreeSRP | Pre-built | 70 – 6000 MHz | 61.44 MHz | ? | ? | 61.44 Msps | 1/1 | USB 3.0 | ? | ? | ? | - | |||
FUNcube Dongle | Pre-built | 64 – 1700 MHz | 16 | 96 kHz | 0/1 | USB | |||||||||
FUNcube Dongle Pro+ | Pre-built | 0.15 – 240 MHz, 420 – 1900 MHz | 16 | 192 kHz | 0/1 | USB | |||||||||
HackRF One | Pre-built | 1 MHz – 6 GHz | 20 MHz | 8 | 8 | 8 – 20 Msps | 20 | 0/1 | USB 2.0 | ||||||
Hermes-Lite2 | experimental kit | 0 to 38.4 MHz | 1.536 MHz | 12 bits @ 76.8 MHz | 12 bits @ 153.6 MHz | 76.8 MSPS | 0.5 ppm | 4 / 4 + 1 | Ethernet | Altera Cyclone IV | Depends on component cost, build9 cost: + for N2ADR Companion Filter Card | ||||
HiQSDR | prebuilt modules & kits, pcbs | 30 kHz – 62 MHz | ? | 48 – 960 kHz | ? | 10/100 Ethernet | - | ||||||||
HobbyPCB RS-HFIQ | Pre-built | 3 MHz – 30 MHz | Up to 250 kHz depending on Sound Card | ? | ? | Yes, 5 Watts | Depends on Sound Card | 2/1 Using HDSDR software | Relies on a computing asset with sound device to process I and Q input and output | Yes, HDSDR, PowerSDR | Yes, Quisk, Linrad, GNU Radio | Yes, various software | |||
Hunter SDR | Kit | 2.5 – 30 MHz | ext | External ADC required | ? | USB | |||||||||
Icom IC-7610 | Pre-built | 0.030 - 60 MHz | 16 | 14 | 130 MHz | 2/2 | USB 2.0 Ethernet | ||||||||
Iris-030 | Pre-built | 50 MHz – 3.8 GHz | 122.88 MHz | 12 | 12 | 122.88 Msps 61.44 Msps | 2/2 | Gigabit Ethernet or 24.6 Gbit/s High-Speed Bus | Xilinx Zynq 7030 | ||||||
ISDB-T 2035/2037 | Pre-built | 50 – 960 MHz | 8 MHz | ? | 0.5-12 MS/s | 0/1 | USB | ||||||||
Kanga Finningley | Kit | 3.750 MHz ± 48 kHz | ext | External ADC required | ? | - | |||||||||
KerberosSDR | Pre-built | 24MHz - 1.7GHz | 4 times the sample rate | 8 | 2.4 Msps | <1ppm | 4/4 | USB | |||||||
LimeSDR | Pre-built | 100 kHz – 3.8 GHz | 61.44 MHz | 12 | ? | 61.44 Msps | 2.5 | 2/2 | USB 3.0, PCIe | Altera Cyclone IV | - | ||||
LimeSDR-Mini | Pre-built | 10 MHz – 3.5 GHz | 30.72 MHz | 12 | ? | 30.72 Msps | 2.5 | 1/1 | USB 3.0, PCIe | Altera MAX 10 | |||||
LD-1B | Pre-built | 100 kHz – 30 MHz | ext | External ADC required | ? | USB | ? | ? | |||||||
Lunaris-SDR | Pre-built | 10 kHz – 55 MHz | ? | 122.88 Msps | 0/4 | Gigabit Ethernet | |||||||||
Matchstiq | Pre-built | 300 MHz – 3.8 GHz | ? | ? | 40 MSPS | ? | Embedded System or USB | Xilinx Spartan 6 | |||||||
MB1 | Pre-built | 10 kHz – 160 MHz | 38 – 312 kHz | 16 | 14 | 160 MSPS, 640 MSPS | 3/4 | 10/100 Ethernet, WLAN | ? | US$5,595 | |||||
Mercury | Pre-built | 0.1 – 55 MHz | ? | 122.88 MSPS | 0/7 | USB or Ethernet | |||||||||
Myriad-RF 1 | Pre-built | 300 MHz – 3.8 GHz | ? | Programmable ; 0.75 – 14 MHz, Bypass mode | 1/1 | standard connector FX10A-80P | none | ||||||||
NooElec NESDR SMArt | Pre-built | 25 – 1750 MHz | ? | USB | ? | ||||||||||
NetSDR | PnP | 0.1 kHz – 34 MHz | ? | 80.0 MHz | 0/1 ? | Ethernet | |||||||||
Noctar | Pre-built PCIe card | 100 kHz – 4 GHz | 200 MHz | ? | ? | ? | PCI Express ×4 | ||||||||
Odyssey TRX | Pre-built | 0.5 – 55 MHz | ? | 122.880 MSps ADC sampling, 48k-960k output samplrate | 2/2 | LAN, WiFi, USB | Altera Cyclone IV | ||||||||
Perseus | Pre-built | 10 kHz – 40 MHz | 1.6 MHz | 16 | 80 MS/s | ? | USB 2.0 | ? | |||||||
Pappradio | Pre-built | 150 kHz – 30 MHz | ext | External ADC required | ? | USB | ? | ||||||||
PCIe SDR MIMO 2x2 | Pre-built | 70 MHz – 6 GHz | ? | 61.44 Msps | 2/2 | PCIe | |||||||||
PM-SDR | Pre-built | 100 kHz – 50 MHz | 192 kHz | ext | External ADC required | ? | USB | ? | |||||||
PrecisionWave Embedded SDR | Pre-built / Customizable Frontends | 1 MHz – 9.7 GHz | 2x RX: 155 MHz 2x TX: 650 MHz 2x2 MIMO Audio: up to 320 Kbps | ? | 310 MSPS | 2 | Embedded System Gigabit Ethernet / USB / JTAG / Audio | Xilinx Zynq Z-7030 | - | ||||||
QS1R | Pre-built | 10 kHz – 62.5 MHz | ? | 130 MHz | 1/2-4 | USB | Altera Cyclone III | ||||||||
Quadrus | Pre-built | 0.1 – 440 MHz | ? | 80 MSps ADC sampling, 48k-1.536M output samplrate | 0/16 | PCI | |||||||||
Realtek RTL2832U DVB-T tuner | Pre-built with custom driver | 24 – 1766 MHz | Matches sampling rate, but with filter roll-off | 8 | 2.8 MHz | ? | USB | - | |||||||
RDP-100 | Pre-built | RX, 0 – 125 MHz; TX, 0–200 MHz | ? | RX: 250 MSPS TX - 800 MSPS | ? | Embedded System | |||||||||
RTL-SDR V3 Receiver Dongle | Pre-built and pre-modded with custom driver | 0.5 – 1766 MHz | Matches sampling rate, but with filter roll-off | 8 | 2.4 MHz | 1 | ? | USB | - | ||||||
SDRplay: RSP1A | Pre-built | 1kHz – 2 GHz | 10 MHz | 14<2MHz 12<8MHz 10<9.216MHz 8>9.216MHz | 20 MSPS with 11 built-in preselection filters | 0.5 | 1/1 | USB 2.0 | none | US$109 | |||||
SDRplay: RSPdx | Pre-built | 1kHz – 2 GHz | 10 MHz | 14<2MHz 12<8MHz 10<9.216MHz 8>9.216MHz | 20 MSPS with 12 built-in preselection filters and 3 antenna ports | 0.5 | 1/1 | USB 2.0 | none | US$199 | |||||
SDRplay: RSPduo | Pre-built | 1kHz – 2 GHz | 10 MHz | 14<2MHz 12<8MHz 10<9.216MHz 8>9.216MHz | Two independent tuners, each with 11 built-in preselection filters. 3 antenna ports | 0.5 | 2/2 | USB 2.0 | none | US$279 | |||||
Soft66AD / Soft66ADD / Soft66LC4 / Soft66RTL | Pre-built | 0.5 – 70 MHz | ext | External ADC required | 0/1 | USB | Unofficially | ? | |||||||
SDR-IQ | PnP | 0.1 kHz – 30 MHz | ? | 66.666 MHz | 1/1 ? | USB | |||||||||
SDR-IP | PnP | 0.1 kHz – 34 MHz | ? | 80.0 MHz | 1/1 ? | Ethernet | |||||||||
SDR-LAB SDR04 | Pre-built | 0.4 – 4 GHz | ? | 40 MHz | ? | USB 3.0 SuperSpeed | |||||||||
SDRX01B | Pre-built and kit option | 50 kHz – 200 MHz | ext | < 2 MHz External ADC required | 0/1 - Scalable | Ethernet or USB usually, but other interfaces are available in MLAB modular system | |||||||||
SDR Minor | Pre-built | 0.1 – 55 MHz | ? | 122.880 MSps ADC sampling, 48k-960k output samplrate | 1/1 | LAN 10/100 | |||||||||
SDR-1 | Kit and pre-built | 530 kHz – 30 MHz | ? | up to 192 kHz depending on soundcard | 0/1 | USB | |||||||||
SDRstick UDPSDR-HF2 | Pre-built | 0.1 – 55 MHz | ? | 122.88 Msps | 0/1 | 1G Ethernet via BeMicroCV-A9 | Altera | ||||||||
SDRstick UDPSDR-HF1Please Note: A functional receiver requires both the UDPSDR-HF1 and a BeMicro SDK FPGA development board | Pre-built | 0.1 – 30 MHz | ? | 80 Msps | 0/1 | 1G Ethernet via BeMicroCV-A9 | Altera | ||||||||
SDR MK1.5 'Andrus' | Pre-built, Open Source Design | 5 kHz – 31 MHz | ? | 64 MSPS | ? | USB 2.0, 10/100 Ethernet | |||||||||
SDR-4+ | Pre-built | 0.85 – 70.5 MHz | ? | 48 kHz | 1/1 | USB × 2 | |||||||||
SDR HF, VHF & UHF | Pre-built | 0.1 – 1850 MHz | ? | Optimized for HF amateur bands with 4 user selectable pre-select HF filters | ? | USB | |||||||||
SoftRock-40 | Kit | 7.5 MHz | ext | 48 kHz | 0/1 | USB | |||||||||
SoftRock Lite II | Kit | 1.891 – 1.795 MHz, 3.57 – 3.474 MHz, 7.104 – 7.008 MHz, 10.173 – 10.077 MHz, 14.095 – 13.999 MHz | ext | 96 kHz | 0/1 | USB | |||||||||
SoftRock RX Ensemble II LF | Kit or Pre-built | 180 kHz – 3.0 MHz | ext | External ADC required | 0/1 | USB | or | ||||||||
SoftRock RX Ensemble II HF | Kit or Pre-built | 1.8 – 30 MHz | ext | External ADC required | 0/1 | USB | or | ||||||||
SoftRock RX Ensemble RXTX | Kit or Pre-built | Choose either 160m, 80m/40m, 40m/30m/20m, 30m/20m/17m, or 15m/12m/10m | ? | External ADC required | USB | or | |||||||||
Spectre | Pre-built | 0.4 – 4 GHz | 200 MHz | 16 | 310 MSPS | USB, Serial, jtag, 10Gbit/s SFP+ Ethernet | |||||||||
SunSDR2 Pro | Pre-built | 10 kHz – 160 MHz | 38 – 312 kHz | 16 | 14 | 160 MSPS, 640 MSPS | 3/4 | 10/100 Ethernet, WLAN | Yes | U$1,595 | |||||
ThinkRF WSA5000 | Pre-built | 50 MHz – 8 GHz, 18 GHz or 27 GHz | ? | 125 MSPS | ? | 10/100/1000 Ethernet | - | ||||||||
UHFSDR | Kit | 1.75 – 700 MHz Tx/Rx | ext | External soundcard required | ? | LPT parallel port or USB/W QRP2000/UBW/UBW32 | N\A | N\A | N\A | ||||||
USRP B200 | Pre-built | 70 MHz – 6 GHz | 56 MHz | 12 | 12 | 56 Msps | USB 3.0 | Xilinx Spartan 6 XC6SLX75 | |||||||
USRP B210 | Pre-built | 70 MHz – 6 GHz | 56 MHz | 12 | 12 | 56 Msps | USB 3.0 | Xilinx Spartan 6 XC6SLX150 | |||||||
USRP N200 | Pre-built | DC – 6 GHz | Up to 25 MHz | 14 | 16 | 25 Msps for 16-bit samples; 50 Msps for 8-bit samples | 0.5 ppm TCXO. 0.01 ppm w/ GPSDO Option | Gigabit Ethernet | Xilinx Spartan 3A-DSP 1800 | ||||||
USRP N210 | Pre-built | DC – 6 GHz | Up to 25 MHz | 14 | 16 | 25 Msps for 16-bit samples; 50 Msps for 8-bit samples | 0.5 ppm TCXO. 0.01 ppm w/ GPSDO Option | Gigabit Ethernet | Xilinx Spartan 3A-DSP 3400 | ||||||
USRP X300 | Pre-built | DC – 6 GHz | Up to 320MHz | 14 | 16 | 200 Msps | 2.5 ppm. GPSDO Option 20 ppb | Gigabit Ethernet, 10 Gigabit Ethernet, PCIe | Xilinx Kintex-7 XC7K325T | ||||||
USRP X310 | Pre-built | DC – 6 GHz | Up to 320MHz | 14 | 16 | 200 Msps | 2.5 ppm. GPSDO Option 20 ppb | Gigabit Ethernet, 10 Gigabit Ethernet, PCIe | Xilinx Kintex-7 XC7K410T | ||||||
UmTRX | Pre-built | 300 MHz – 3.8 GHz | Up to 28 MHz | 12 | 12 | 13 MSPS x2 | 0.1; 0.01 with GPS lock | ? | Gigabit Ethernet | ? | Spartan 6 LX75 | ||||
WARPv3 | Pre-built | 2.4 GHz and 5.8 GHz | 40 MHz | 12 | 12 | 40 Msps | 1/2 | Dual Gigabit Ethernet | Xilinx Virtex-6 LX240T | ||||||
WinRadio WR-G31DCC | Pre-built | 9 kHz – 50 MHz | ? | N/A | 100 MSPS | 3/3 | USB | ||||||||
X-RAD | Pre-built | RX: 950–1450 MHz TX: 875–1525 MHz | ? | RX: 1.6 GSPS TX: 3.2 GSPS | ? | PCIe | |||||||||
Xiegu G90 | Pre-built | RX: 0.5 - 30 MHz TX: all amateur bands 1.8 - 30 MHz | 48 kHz | 24 | Yes 20W |
| 10 | 1/1 | Embedded system, I/Q output for interfacing with a PC or XDT1 panadapter | Yes | Yes | Yes | €479.00 | ||
XTRX Pro | Pre-built | 30 – 3700 MHz | 120 MHz | 12 | 12 | 120 MSRP SISO, 90 MSRP MIMO | 0.1; 0.01 with GPS lock | mini PCIe | Xilinx Artix7 50T | ||||||
Zeus ZS-1 | Pre-built | 300 kHz – 30 MHz | ? | 10 kHz, 20 kHz, 40 kHz, 100 kHz | 1/3 | USB 2.0 | |||||||||