List of Farm to Market Roads in Texas (1000–1099)
s in Texas are owned and maintained by the Texas Department of Transportation.
FM 1000
FM 1001
Farm to Market Road 1001 is located entirely in Titus County.FM 1001 begins at an intersection with US 67/Farm to Market Road 2348 just east of Mount Pleasant. The highway travels in a northeast direction and crosses I-30 before entering Argo. After leaving Argo, FM 1001 turns east and ends at an intersection with FM 1993/County Road 3425.
FM 1001 was designated on November 23, 1948, running from US 67 to Argo. The highway was extended to its current terminus at FM 1993 on October 29, 1953.
;Junction list
FM 1002
Farm to Market Road 1002 is located entirely in Upshur County.FM 1002 begins at an intersection with SH 155 north of Big Sandy. The highway intersects with SH 154 in Rhonesboro and ends at an intersection with FM 852 southeast of Winnsboro.
FM 1002 was designated on November 23, 1948, running from SH 155 northeast to Sandy Grove. The highway was extended further north to SH 154 in Rhonesboro on November 20, 1951. FM 1002 was extended north of SH 154 on November 25, 1975. The last change came on April 25, 1978, when the highway was extended to FM 852.
;Junction list
FM 1003
Farm to Market Road 1003 is located entirely in Hardin County.FM 1003 begins at an intersection with FM 770 near the Big Thicket National Preserve. The highway travels in a predominately northern direction before reaching Honey Island, where the road has a short overlap with FM 1293. After leaving Honey Island, FM 1003 runs in a northeast direction before ending at an intersection with US 69/US 287.
FM 1003 was designated on November 23, 1948, running from US 69 to FM 770. The highway's description was changed on September 1, 1972 to show a break at FM 1293 in Honey Island.
;Junction list
FM 1004
Farm to Market Road 1004 is located in Jasper and Newton counties.FM 1004 begins at an intersection with US 96/SH 62 in Buna. The highway travels through rural areas of Jasper County. FM 1004 turns east at Jasper County Road 626 and has an overlap with US 96 near Call Junction. The highway enters Call just east of the Jasper-Newton county line. FM 1004 runs south of E.O. Siecke State Forest before ending at an intersection with SH 87.
FM 1004 was designated on November 23, 1948, running from US 96 at Call Junction east to SH 87 at Front Creek. The highway was extended westward, southward and southeastward to US 96 in Buna on October 28, 1953. Most of this extension absorbed part of the cancelled FM 1407.
;Junction list
FM 1005
Farm to Market Road 1005 is located entirely in Jasper County.FM 1005 begins at an intersection with FM 1013 northeast of Kirbyville. The highway travels through Magnolia Springs and intersects FM 252 northeast of town before ending at an intersection with US 96.
FM 1005 was designated on November 23, 1948, running from US 96 in Kirbyville southward toward Call. The highway was extended to FM 1004 at Call on November 23, 1949. FM 1005 was extended to a road intersection northwest of Kirbyville on May 23, 1951. Later that year on November 20, the highway was extended to US 96 at Zion Hill, absorbing all of the cancelled FM 1006. FM 1006 was reassigned to a road in Orange County. The last change came on December 1, 1958, when the section of FM 1005 from Mount Union to Call was transferred to FM 1013.
;Junction list
FM 1006
Farm to Market Road 1006 is located entirely in Orange County.FM 1006 begins at an intersection with SH 87 in southwestern Orange near Orange County Airport. The highway travels around the southern part of the town and turns north onto Bridge Street near the Sabine River. FM 1006 travels north on Bridge Street before ending at an intersection with Bus. US 90.
The current FM 1006 was designated on December 17, 1952, running from SH 87 to US 90, absorbing Spur 171 in the process.
;Junction list
FM 1006 (1948)
The first FM 1006 was designated on November 23, 1948, running from US 96 to Magnolia Springs. This highway was cancelled on January 16, 1952 with the mileage being transferred to FM 1005.FM 1007
Farm to Market Road 1007 is located entirely in Jasper County.FM 1008
Farm to Market Road 1008 is located entirely in Liberty County. It runs from SH 321 in Dayton via Kenefick to SH 321 north of Dayton.FM 1008 was designated on November 23, 1948 from SH 321 in Dayton to a point 8.2 miles west. On January 25, 1950, the western terminus was relocated, absorbing a 0.3 mile section of FM 686. On November 20, 1951 the road was extended northeast 5.1 miles to Kenefick. On December 17, 1952 the road was extended northeast 0.8 mile from Kenefick. On November 23, 1953 a 2.4 mile section from 6 miles west of Dayton to FM 686 was transferred to FM 686 and the road was extended west 6.6 miles to a county road at Huffman and 1.1 miles north from Kenefick. On November 1, 1954 the road was extended another 4.1 miles north from Kenefick. On October 15, 1955 the road was extended north 5.5 miles to SH 321, 13 miles north of Dayton, replacing FM 164. On December 18, 1956 a 12.5 mile section from Huffman to SH 321 in Dayton was transferred to FM 1960.
FM 1009
Farm to Market Road 1009 is located in Liberty and Jefferson counties.FM 1010
Farm to Market Road 1010 is located entirely in Liberty County.FM 1011
Farm to Market Road 1011 is located entirely in Liberty County.FM 1012
Farm to Market Road 1012 is located entirely in Newton County.FM 1013
Farm to Market Road 1013 is located in Tyler, Jasper and Newton counties.FM 1013 begins at an intersection with US 69/US 287 in the community of Hillister. The highway travels in a mostly eastern direction and intersects FM 92 in the town of Spurger. East of Spurger, FM 1013 crosses over the Neches River and intersects with FM 1005 before entering the town of Kirbyville. In Kirbyville, the highway intersects FM 252 and briefly turns southeast before turning back east at Main Street. FM 1013 intersects US 96 and turns south onto Elizabeth Avenue and leaves town at FM 82. The highway travels in a mostly southern direction before ending at an intersection with FM 1004 in Call.
FM 1013 was designated on November 23, 1948, running from US 69 at Hillister to FM 92 at Spurger. The highway was extended to FM 1004 at Call on October 31, 1958, absorbing sections of FM 1005 and all of FM 2304. The last change came on April 30, 1962, with the break at FM 92 being removed and FM 1013 being slightly re-routed through Spurger.
;Junction list
FM 1014
Farm to Market Road 1014 is located entirely in Tyler County.FM 1015
Farm to Market Road 1015 is located entirely in Hidalgo County.FM 1016
Farm to Market Road 1016 is located entirely in Hidalgo County. The highway is known locally as S. Conway Road in Mission and Military Highway in McAllen.FM 1016 begins at I-2/US 83 in Mission, with Conway Road continuing into the city as SH 107. The highway travels in a southern direction and turns southeast near the Madero neighborhood, with the highway running in close proximity to the Rio Grande. FM 1016 turns east at FM 494 and runs through less developed areas of the city. The highway crosses FM 396 and enters McAllen after the intersection with Shary Road. Between FM 396 and Spur 115, FM 1016 runs through a heavily industrialized area with many business parks. The highway travels through a mainly rural area before ending at an intersection with SH 336.
FM 1016 was designated on November 23, 1948, running from US 83 in Mission to SH 336 south of McAllen as a redesignation of part of SH 107. A small section of the highway in McAllen was transferred to FM 1926 on June 10, 1952. Part of FM 1016 in Mission was transferred to SH 107 on May 21, 1979. The highway was relocated on January 26, 1983 between FM 494 and Spur 115. On December 18, 1986, FM 1016 was relocated west of Spur 115. The last change came on June 27, 1995 when all of FM 1016 was internally re-designated as Urban Road 1016 by TxDOT.
FM 1017
Farm to Market Road 1017 is located in Jim Hogg, Starr and Hidalgo counties.FM 1017 begins at an intersection with US 281/SH 186 in San Manuel-Linn. The highway travels in a slight northwest direction through the town and intersects FM 3250 just west of the town. FM 1017 travels through La Reforma before entering San Isidro, intersecting FM 2294. The highway continues to run through rural areas before entering La Gloria, beginning an overlap with FM 755. After leaving FM 755, FM 1017 travels in a westward direction before turning towards the north at FM 2686. The highway travels in a mostly northern direction before ending at an intersection with SH 285 in Hebbronville.
FM 1017 was designated on November 23, 1948, running from US 281 to a point approximately to the west. The highway was extended further west and north to the Jim Hogg county line on November 30, 1949, replacing FM 1431 and FM 1429. running at total a distance of approximately. FM 1017 was then extended to SH 285 near Hebbronville on November 20, 1951. On June 10, 1952, a section of FM 1017 was transferred to FM 755. There was a proposed extension of the highway to SH 359 on August 29, 1989, but this was cancelled as the court commissioner of Jim Hogg County did not accept the extension.
;Junction list
FM 1018
Farm to Market Road 1018 is located entirely in Willacy County.FM 1019
Farm to Market Road 1019 is located entirely in Dimmit County.FM 1020
Farm to Market Road 1020 is located entirely in Karnes County.FM 1020 (1948)
The original FM 1020 was designated on November 23, 1948 from SH 41 southwest. FM 1020 was cancelled on April 18, 1949 and became a portion of FM 674.FM 1021
Farm to Market Road 1021 is located entirely in Maverick County.FM 1021 begins at an intersection with US 57 in Eagle Pass. The highway intersects with FM 375 and FM 3443 in the city. FM 1021 runs along the southern boundary of Las Quintas Fronterizas and crosses Loop 480 before running on the boundaries of Chula Vista and Rosita. After leaving the Eagle Pass area, the highway runs through mostly rural areas of the county before entering El Indio. FM 1021 ends south of El Indio with the road continuing as the unimproved Eagle Pass Road, which transitions into FM 1472 in Webb County.
FM 1021 was designated on November 23, 1948, running from SH 85 near Eagle Pass to El Indio. The highway's beginning was moved to SH 76 on April 21, 1949. FM 1021 was extended south of El Indio on July 15, 1949. The highway was extended another approximately on January 27, 1950 and was extended another to its current terminus on July 11, 1968.
;Junction list
RM 1022
Ranch to Market Road 1022 is located entirely in Uvalde County.RM 1022 begins at a dead end near the former mining community of Dabney. The highway travels in an east direction, with the highway forking northeast of the town, with the other section of RM 1022 traveling to the main entrance of the Vulcan Materials Company. The highway turns north and runs parallel to a rail line until passing in between the White Company Lake and the Uvalde Rock Asphalt Company Lake. RM 1022 runs by several ranches and rock quarries before ending at an intersection with US 90.
RM 1022 was designated on November 23, 1948 as FM 1022, running from US 90 west of Uvalde to Blewett. The highway was extended to Dabney on November 20, 1951. On October 17, 1959, the road was redesignated as RM 1022.
FM 1023
Farm to Market Road 1023 is located entirely in Uvalde County.FM 1023 begins at intersection with FM 1049/County Road 301 south of Knippa. The highway is signed as north-south despite running in a southwest/northeast direction for most of its length. FM 1023 enters Uvalde near Garner Field, where it intersects with FM 1574. FM 1023 runs along Garner Field Road and has a short overlap with US 90 before running on 4th Street. The highway runs along 4th Street in eastern Uvalde before ending at an intersection with FM 2369.
FM 1023 was designated on December 20, 1948, running from US 90 east of Uvalde to Garner Field. This section of highway was formerly a part of FM 187. FM 1023 was extended north from US 90 to FM 2369 on May 22, 1959. this section was rerouted later, with the old route becoming FM 3447 on January 26, 1983. On May 6, 1964, FM 1023 extended north from Garner Field to US 90. On October 15, 1965, the section between US 90 and Garner Field was renumbered FM 1574. The highway was extended to County Road 302 on June 2, 1967. The last change came on July 11, 1968 when FM 1023 was extended to FM 1049.
;Junction list
RM 1024
Ranch to Market Road 1024 is located entirely in Val Verde County.RM 1024 begins at an intersection with US 90 near Comstock. The highway travels through highly rural areas and doesn't intersect any other highways for the rest of its length. RM 1024 ends at an intersection with Langtry Road/Pandale Road near the town of Pandale.
RM 1024 was designated on November 23, 1948 as FM 1024, running from US 90 near Comstock to a point northwestward at a distance of. On July 15, 1949, FM 1024 extended northwestward. On June 21, 1951, FM 1024 extended northwestward. On January 23, 1953, FM 1024 extended northwest. On October 29, 1953, FM 1024 extended northwest. On October 17, 1959 FM 1024 was redesignated as RM 1024. On September 27, 1960, RM 1024 extended northwestward. On May 2, 1962, RM 1024 extended northwest. On May 5, 1966, RM 1024 extended northwest. On June 2, 1967, RM 1024 extended westward. On November 5, 1971, RM 1024 extended westward to its current terminus.
FM 1025
Farm to Market Road 1025 is located entirely in Zavala County.FM 1026
Farm to Market Road 1026 is located entirely in Coleman County.FM 1027
Farm to Market Road 1027 is located entirely in Eastland County.FM 1028
Farm to Market Road 1028 is located entirely in McCulloch County.FM 1029
Farm to Market Road 1029 is located entirely in Mills County.FM 1030
Farm to Market Road 1030 is located entirely in San Saba County.FM 1031
Farm to Market Road 1031 is located entirely in San Saba County.FM 1032
Farm to Market Road 1032 is located entirely in Stephens County. It originates from its eastern terminus at U.S. Highway 183 south of Breckenridge and terminates at the western terminus where it intersects with Stephens County Roads 187 and 190.FM 1032 was designated on November 23, 1948 on its current route.
FM 1033
Farm to Market Road 1033 is located in Childress and Cottle counties.FM 1034
Farm to Market Road 1034 is located entirely in Childress County.FM 1035
Farm to Market Road 1035 is located entirely in Collingsworth County.FM 1036
Farm to Market Road 1036 is located entirely in Collingsworth County.FM 1037
Farm to Market Road 1037 is located entirely in Cottle County. The road begins at US 62/US 83 in Paducah, and continues west, then south, ending at County Road 230 in Cottle County north of Delwin.FM 1037 was designated on November 23, 1948 from US 70 east of Paducah west to end of pavement on Backus Avenue in Paducah. On September 21, 1955, another segment of FM 1037 was designated from US 83 west to US 70 west of Paducah. This created a gap in the route's mileage. On January 22, 1957, FM 1037 extended from the end of pavement on Backus Avenue to US 83. This closed the gap. On October 31, 1958, FM 1037 extended south from US 70 west of Paducah.
FM 1038
Farm to Market Road 1038 is located entirely in Cottle County.FM 1039
Farm to Market Road 1039 is located entirely in Foard County.FM 1040
Farm to Market Road 1040 is located entirely in Live Oak County.FM 1040 (1948)
The original FM 1040 was designated on November 23, 1948 from US 70 in Thalia southward. FM 1040 was cancelled on April 20, 1949 and became a portion of FM 262.FM 1041
Farm to Market Road 1041 is located entirely in Hall County.FM 1042
Farm to Market Road 1042 is located entirely in Live Oak County.FM 1042 (1948)
The original FM 1042 was designated on November 23, 1948. Six months later FM 1042 was cancelled in lieu of extending FM 656.FM 1043
Farm to Market Road 1043 is located entirely in Knox County.FM 1044
FM 1044 (1948)
The original FM 1044 was designated on November 23, 1948 from US 82 southward. On December 17, 1952, the road was extended south FM 1044 was cancelled on November 16, 1953 and became a portion of FM 266.FM 1045
Farm to Market Road 1045 is located entirely in Motley County.FM 1046
Farm to Market Road 1046 is located entirely in Wheeler County.FM 1047
Farm to Market Road 1047 is located in Hamilton, Mills and Lampasas counties.FM 1047 begins at an intersection with FM 581 about northeast of Lometa. The highway travels through mostly rural areas and intersects US 84 near Star. FM 1047 then crosses the Lampasas River before ending at an intersection with FM 2005 southwest of Hamilton.
FM 1047 was designated on November 23, 1948, running from FM 581 to Lampasas County Road 120. On May 23, 1951, the highway was extended to the Mills county line. FM 1047 was extended to US 84 in Star on November 20, 1951, replacing Spur 183. The last change came on May 2, 1962, when the highway was extended to its current terminus at FM 2005, absorbing FM 2707 in the process.
;Junction list
FM 1048
Farm to Market Road 1048 is located entirely in Falls County.FM 1049
Farm to Market Road 1049 is located entirely in Uvalde County.RM 1050
Ranch to Market Road 1050 is located entirely in Uvalde County.RM 1050 begins at an intersection with US 83 near Garner State Park. The highway travels in an eastern direction along the park's northern boundary before intersecting RM 2748. RM 1050 travels through hilly terrain of the Texas Hill Country before entering Utopia, ending at an intersection with RM 187.
RM 1050 was designated on November 23, 1948 as FM 1050, running from FM 187 in Utopia to US 83. On October 17, 1959, FM 1050 was changed to RM 1050.
;Junction list
FM 1051
Farm to Market Road 1051 is located entirely in Uvalde County.The route begins at an intersection with US 83 southwest of Concan and travels northwest to the community of Reagan Wells before state maintenance ends.
FM 1051 was designated on November 23, 1948 on its current route.
FM 1052
Farm to Market Road 1052 is located entirely in Uvalde County.FM 1053
FM 1054
Farm to Market Road 1054 is located in Lynn and Borden counties.FM 1055
Farm to Market Road 1055 is located in Deaf Smith, Castro and Lamb counties.FM 1056
Farm to Market Road 1056 is located entirely in Collingsworth County.FM 1056 (1948)
The original FM 1056 was designated on December 16, 1948 from SH 86 at Nazareth northward to a road intersection. FM 1056 was cancelled on July 5, 1951 and became a portion of FM 168.FM 1057
Farm to Market Road 1057 is located in Deaf Smith and Castro counties.FM 1058
Farm to Market Road 1058 is located entirely in Castro County.FM 1059
Farm to Market Road 1059 is located in Hutchinson and Carson counties.FM 1060
Farm to Market Road 1060 is located in Sherman and Moore counties.RM 1061
Ranch to Market Road 1061 is located in Potter and Oldham counties.RM 1061 begins at an intersection with BL I-40 in Amarillo. The highway is known locally as Tascosa Road and runs northwest through the city, passing several subdivisions. RM 1061 leaves the city before having an interchange with Loop 335. The highway travels in a northwestern direction and turns to the west at Melfrank Road. RM 1061 runs along the southern boundary of Bishop Hills and turns back to the northwest near Ranch Road. After passing Ranch View Drive the highway runs through mainly rural areas of the county. RM 1061 intersects with RM 2381 north of Bushland. The highway runs through rural areas before ending at an intersection with US 385 in Tascosa.
RM 1061 was designated as FM 1061 on December 16, 1948, running from US 66 in Amarillo to a road intersection at a distance of approximately. On September 21, 1955, the road was extended northwest to a point near Ady and was redesignated as RM 1061. RM 1061 was extended to Tascosa at SH 51 on November 21, 1956. The section of RM 1061 between BL I-40 and Loop 335 was internally re-designated as Urban Road 1061 on June 27, 1995, but became part of RM 1061 again on November 15, 2018. On November 15, 2018, UR 1061 from BL I-40 and Loop 335 became part of FM 1061.
;Junction list
FM 1062
Farm to Market Road 1062 is located in Deaf Smith and Randall counties.FM 1063
Farm to Market Road 1063 is located entirely in Williamson County.FM 1063 (1948)
The original FM 1063 was designated on December 16, 1948 from US 62 at Cone, westward and southward to Farmer. On July 14, 1949, the road was extended west from Farmer to a road intersection and east from US 62 to a road intersection. On September 28, 1949, the road was extended west to FM 378. On December 17, 1952, the road was extended east to FM 651. On November 21, 1956, the road was extended east to FM 28. FM 1063 was cancelled on November 1, 1960 and became a portion of FM 193.FM 1064
Farm to Market Road 1064 is located entirely in Dawson County.FM 1065
Farm to Market Road 1065 is located in Briscoe and Floyd counties.FM 1066
Farm to Market Road 1066 is located in Gaines and Dawson counties.FM 1067
Farm to Market Road 1067 is located entirely in Gaines County.FM 1068
Farm to Market Road 1068 is located entirely in San Patricio County.FM 1068 (1948)
The original FM 1068 was designated on December 16, 1948 from US 84 westward to the Garza-Lynn county line. Three months later FM 1068 was cancelled and became a portion of FM 211.FM 1068 (1951)
The second FM 1068 was designated on May 23, 1951 from US 181 at Taft eastward and northward to Plymouth Oil Field. FM 1068 was cancelled on March 24, 1958 and became a portion of FM 631.FM 1069
Farm to Market Road 1069 is located in Aransas and San Patricio counties. It runs from Business SH 35-L in Rockport to Redfish Bay at Port Ingelside.FM 1069 was designated on May 23, 1951 from SH 35, west of Aransas Pass, north to the Aransas County line. On September 19, 1951 the road was extended northeast to FM 881. On October 29, 1953 the road was extended southwest to FM 632 at Ingleside and then onto Redfish Bay, creating a gap at FM 632 and replacing FM 2094. On November 24, 1959 the road was extended southeast to SH 35. On January 1, 1966 the gap at Ingelside was removed following a rerouting of FM 632. On December 22, 1992 a section from FM 881 to the then-new location of SH 35 was transferred to SH 188. On August 18, 1993 a section from then-new SH 35 to existing SH 35 was transferred to SH 188, while FM 1069 was rerouted over FM 881 to Business SH 35-L. On April 3, 2006 a section of FM 1069 in Rockport was redesignated as Loop 70.
FM 1069 (1948)
The original FM 1069 was designated on December 16, 1948 from US 70, west of Halfway, south to a road intersection. Four months later FM 1069 was cancelled and became a portion of FM 594.FM 1070
Farm to Market Road 1070 is located entirely in Hale County.FM 1071
Farm to Market Road 1071 is located in Hale and Lamb counties.FM 1072
Farm to Market Road 1072 is located entirely in Lamb County.FM 1073
Farm to Market Road 1073 is located entirely in Freestone County.FM 1073 (1948)
The original FM 1073 was designated on December 16, 1948 from US 84 at Shallowater southward to a road intersection. On July 14, 1949, the road extended south. On October 28, 1953, the road extended south to US 62. On October 14, 1954, the road extended south to the Lubbock-Lynn county line, replacing FM 1316. Twelve days later, the road extended south to FM 211. On May 2, 1962, the road extended south to FM 1317. FM 1073 was cancelled on August 20, 1964 and became a portion of FM 179.FM 1074
Farm to Market Road 1074 is located entirely in San Patricio County.FM 1074 (1948)
The original FM 1074 was designated on December 16, 1948 from US 87 north of Tahoka northeastward via Wilson to the Lynn-Lubbock County Line. Three months later FM 1074 was cancelled and became a portion of FM 400.FM 1075
Farm to Market Road 1075 is located in Castro, Swisher, Randall and Armstrong counties.FM 1076
Farm to Market Road 1076 is located entirely in Terry County.RM 1077
Ranch to Market Road 1077 is located entirely in Bandera County.RM 1077 begins at Bandera Creek Road approximately northeast of the Hill Country State Natural Area. The highway travels in a northeast direction for most of its length before ending at an intersection with SH 173 just south of Bandera.
RM 1077 was designated on June 2, 1967, running from FM 689 to a point southwest at a distance of about. The highway was extended another on July 11, 1968. An extension of RM 1077 to the Hill Country SNA was proposed on August 28, 1989, but was cancelled on September 25, 2003, as the county could not secure right of way.
;Junction list
FM 1077 (1948)
The original FM 1077 was designated on December 16, 1948, running from the New Mexico state line to US 380 in Plains. On March 30, 1955, the road was signed, but not designated, as SH 337 to match New Mexico Highway 337. The highway was cancelled on September 26, 1963, with the mileage being transferred to US 82, which also replaced New Mexico Highway 337.FM 1078
Farm to Market Road 1078 is located entirely in Orange County.FM 1078 (1948)
The original FM 1078 was designated on December 16, 1948 from US 80 in Clyde southward to a road intersection. On July 14, 1949, the road was extended south to another road intersection. On May 23, 1951, the road was extended south to SH 36. FM 1078 was cancelled on July 11, 1951 and transferred to FM 604.FM 1078 (1951)
The second FM 1078 was designated on July 25, 1951 from US 81 in Kyle northwest to a road intersection in Hays City. The road FM 1078 ended at the west end became part of FM 966 on November 20, 1951. FM 1078 was cancelled on October 27, 1952 and was transferred to FM 150 ; note that FM 150 replaced FM 966 on May 25, 1955.FM 1078 (1952)
The third FM 1078 was designated on December 17, 1952 from US 77 near Lewisville west to FM 1830 in Bartonville. FM 1078 was cancelled on January 6, 1955 and became a portion of FM 407.FM 1079
Farm to Market Road 1079 is located entirely in Callahan County. It runs from FM 880 west to Cotton Wood.FM 1079 was designated on December 16, 1948, from US 80 in Putnam southward to a road intersection. On July 14, 1949, the road extended south to another road intersection. On May 23, 1951, the road extended south to FM 880 at Cotton Wood. On September 5, 1951, this routing of FM 1079 became a portion of FM 880, while FM 1079 was reassigned to the old route of FM 880.
FM 1080
Farm to Market Road 1080 is located entirely in Haskell County.FM 1081
Farm to Market Road 1081 is located in Dickens and Kent counties.FM 1081 (1948)
The original FM 1081 was designated on December 16, 1948, from SH 24 at Rule northwest to Jud. On May 23, 1951, the road was extended northeast to SH 283 in Rochester. FM 1081 was cancelled on August 5, 1955 and became a portion of FM 617.FM 1082
Farm to Market Road 1082 is located in Jones and Taylor counties.FM 1083
Farm to Market Road 1083 is located entirely in Kent County.FM 1084
Farm to Market Road 1084 is located entirely in Shackelford County.FM 1085
Farm to Market Road 1085 is located in Fisher, Jones and Taylor counties.FM 1086
Farm to Market Road 1086 is located entirely in Taylor County.FM 1087
Farm to Market Road 1087 is located entirely in Nacogdoches County.FM 1088
FM 1088 (1948)
The original FM 1088 was designated on December 16, 1948 from SH 36, 1 mile west of Peters, to Cat Spring. On September 21, 1955 the road was extended southwest to the San Bernard River at the Colorado County line. FM 1088 was cancelled on December 7, 1972 and became a portion of FM 949.FM 1089
Farm to Market Road 1089 is located in Smith and Cherokee counties.FM 1089 (1948)
The original FM 1089 was designated on December 16, 1948 from SH 35 at Old Ocean north to West Columbia/Pledger Road. FM 1089 was cancelled on June 9, 1958 and became a portion of FM 524.RM 1089 (1959)
RM 1089 was designated on November 24, 1959, from US 290 at Hye southward to RM 1623 near Albert. RM 1089 was cancelled by 1969 and was removed from the state highway system.FM 1090
Farm to Market Road 1090 is located in Victoria and Calhoun counties.FM 1090 (1948)
The original FM 1090 was designated on December 16, 1948 from FM 524 at Four Corners southwest to FM 457 at Cedar Lane. FM 1090 was cancelled on January 16, 1953 and transferred to FM 521.FM 1091
Farm to Market Road 1091 is located entirely in Live Oak County.FM 1091 (1948)
The original FM 1091 was designated on December 16, 1948 from SH 35 in Angleton to the north end of the Bastrop Bayou Bridge. Seven months later FM 1091 was cancelled and became a portion of FM 523.FM 1092
Farm to Market Road 1092 is located in Harris and Fort Bend counties. Known locally as Murphy Road, it runs from SH 6 at Missouri City north to US 59/IH 69 in Houston.FM 1092 was designated on December 16, 1948 from US 59 at Stafford south to SH 6. On September 20, 1961 the road was extended north to the then-proposed new US 59. On June 30, 1995 the entire route was transferred to UR 1092.
FM 1093
Farm to Market Road 1093 is located in Colorado, Wharton, Austin, Fort Bend and Harris counties. It runs from FM 3013 in Eagle Lake to I‑610 in Houston.FM 1093 was designated on December 16, 1948, from FM 359 at Flewellen via Gaston to Post Oak Road west of Houston. On July 9, 1951, the road was extended west to SH 36 at Wallis, replacing FM 1094 and creating a concurrency with FM 359. On September 29, 1954, the road was extended west to US 90A at Eagle Lake, replacing FM 1597 and creating a concurrency with SH 36. On July 11, 1962, the road was extended east to I‑610. On January 25, 1971, the road was shortened to end at FM 3013, as a section from US 90A to FM 3013 was transferred to FM 3013. On June 30, 1995, the section between SH 99 and I‑610 was transferred to UR 1093.
;Major intersections
FM 1094
Farm to Market Road 1094 is located entirely in Austin County. It runs from FM 109 at New Ulm southeast to SH 36 at Sealy.FM 1094 was designated on July 25, 1951 from FM 109 at New Ulm to a point east. On November 20, 1951 the road was extended to FM 1088. On September 29, 1954 the road was extended to SH 36 at Sealy, replacing FM 2142.
FM 1094 (1948)
The original FM 1094 was designated on December 16, 1948 from FM 359 at Fulshear to Simonton. On July 22, 1949 the road was extended southwest to SH 36 at Wallis. FM 1094 was cancelled on July 9, 1951 and became a portion of FM 1093.FM 1095
Farm to Market Road 1095 is located entirely in Matagorda County. It runs from SH 35 east of Blessing to Collegeport.FM 1095 was designated on December 16, 1948, from SH 35, east of Blessing southward to a road intersection west of Citrus Grove. On July 22, 1949, FM 1095 extended south and west to Collegeport.
FM 1096
FM 1096 (1948)
The original FM 1096 was designated on December 16, 1948 from SH 60 at Wadsworth west to a county road. FM 1096 was cancelled on October 15, 1954 and became a portion of FM 521.FM 1097
Farm to Market Road 1097 is a state highway in the U.S. State of Texas. FM 1097 originally began at FM 149 in Montgomery, Texas, and ends nearly away at State Highway 150. Most of the road has only two lanes each direction. The speed limit ranges from to. There are very few traffic lights on the highway.FM 1097 was first designated on December 16, 1948. The highway traveled from an intersection with FM 149 north of Montgomery along its present route to an intersection with U.S. Route 75 in Willis. On July 22 of the next year, the designation was extended to the Walker County border. The road was extended eastward, to the highway's present eastern terminus, on November 20, 1951. On May 2, 1962, the highway was extended northwestward to its present northern terminus.
;Major junctions
FM 1098
Farm to Market Road 1098 is located entirely in Waller County. It runs from FM 1488 northeast of Hempstead south to US 290 in Prairie View.FM 1098 was designated on December 16, 1948 from Spur 96 at Prairie View College north to a road intersection. On June 8, 1949 the route was shortened to end at a county road intersection at Field's Store School. On July 9, 1951 the road was extended to US 290 southeast of Hempstead, replacing a portion of Spur 96. On November 20, 1951 the road was extended north to the Grimes County line. On January 16, 1953 a 12.3 mile section of FM 1098 was transferred to FM 362 and FM 1488, while a loop connection of FM 1098 was added around Prairie View College, replacing Loop 96. On October 15, 1976 the road was rerouted around the west side of Prairie View A & M College over the loop connection and the section through campus was removed from the highway system.