Langley Vale Timber Tramway


The Langley Vale Timber Tramway was a -long narrow gauge railway network with mainly wooden rails with a gauge of. It was used from 1897 to 1933 for transporting logs to a sawmill at Lansdowne in the Manning River Valley, north of Taree, New South Wales.

Route

The track started at the sawmill and ran upwards with grades of up to 12,5 % over rough trestles with a length of up to 50 m, over Cross's Mountain, across Razorback, down a declivity, and up another rise, which forms the western wall of Hannam Vale, being about 365 m above the starting point. The uphill journey needed normally less than 3–4 hours.
In the Lansdowne State Forest, as well as in Langley's private holdings tall timbers were harvested, including blackbutt, tallowwood, grey gum, flooded gum, bloodwood, white mahogany, turpentine and brush box but no ironbark.

Operation

The railway and the sawmill were owned and managed by William Edwin Langley. He joined his father's business after serving his time as a joiner in 1879. His new sawmill was inaugurated on 3 July 1902. In April 1931 he became president of the Timber Merchants Association.

Locomotive

From 1912 the 18-ton Climax Class A locomotive with serial number x38 of 1912 was used. It was sold in November 1933 to Smith & Ellis Ltd. in Langley Vale. In 1942 it was regauged to and used at Circular Head Amalgamated Timber Co. in Smithton, Tasmania. There it was dismantled in 1971 and scrapped.

Ships

The Langley brothers owned and operated also several ships. These moored at either the mill wharf or at sleeper yard from the mill wharf. The Gwendoline was a topsail schooner built in 1897 at Coopernook, NSW. She was 84 tons, 86 feet long, 23.1 feet wide and had a 7.2 foot draft. The Gwendoline was owned by the Langley Brothers Company and made frequent trips between Sydney and the Tweed from 1897 to 1903.
Gilbert Mowatt built in 1904 the steam ship Cooloon for Alfred Langley and Robert H Langley who were trading as Langley Brothers & Co. at the site of their mill at Rockville near Lansdowne. She was made from colonial hardwood and tastefully fitted throughout her saloon in mahogany and pine panelling painted with country scenes by the ladies of the Manning. It was named after the township of Cooloon on the Tweed River.
The steamer Duroby belonged also to the Langley Brothers.

Cultural heritage protection

The track of the Langley Vale Tramway runs through forest compartments No 193, 194 and 195 mainly along Rock Creek. The route is shown on the Harvest Plan Operational Maps. The remains of the trestles, embankments and cuttings are protected as cultural heritage. The objective of the relevant prescriptions is to preserve all substantial remnants of earthworks and infrastructure, especially cuttings where encountered.
Historic structures in the tramway corridor may not be disturbed. Trees are not to be felled into the tramway corridor, where a cutting exists, however, if a tree is accidentally felled, it may be removed, if this can be carried out without causing damage to the cutting. Felling of trees out of the tramway corridor may only be approved if the activity will not cause damage to the cuttings. Machinery may not enter the tramway corridor except to cross, where the tramway is level with the ground surface, i.e. where no substantial earthworks are present. Snigging along the tramway is not permitted.

Additional literature