JCSAT-1B


JCSAT-1B, known as JCSAT-5 before launch, is a geostationary communications satellite operated by SKY Perfect JSAT Group which was designed and manufactured by Hughes on the HS-601 platform. It has a pure Ku band payload and was used to replace JCSAT-1 at the 150°East longitude. It covers Japan, Korea, most of China, Thailand, Vietnam, Laos, part of Indonesia, part of Malaysia and Hawaii.

Satellite description

The spacecraft was designed and manufactured by Boeing on the BSS-601 satellite bus. It had a launch mass of and a 12-year design life. Its solar panels span when fully deployed and generated approximately 5 kW of power, with its antennas in fully extended configuration it is wide. It would provide communications services throughout Japan, East Asia, Australia and Hawaii.
Its payload is composed of sixteen 36 MHz plus another sixteen 27 MHz Ku band transponders, for a total bandwidth of 1,008 MHz. Its twelve of the 36 MHz transponders have a TWTA output power of 95 Watts, the other four 36 MHz and the 27 MHz ones have 60 Watts. It can configure four 36 MHz transponders into two 76 MHz with an effective 95 Watts.
The Ku band footprint covers Japan, Korea, most of China, Thailand, Vietnam, Laos, part of Indonesia, part of Malaysia and Hawaii.

History

In June 1996, JSAT ordered JCSAT-5 from Hughes, to replace JCSAT-1 at the 150° East slot. The HS-601 based satellite would provide coverage to Japan, East Asia, Australia and Hawaii.
An Ariane 44P successfully launched JCSAT-5 on December 2, 1997 at 22:52:32 UTC from Guiana Space Centre ELA-2 launch pad. Once successfully deployed, it was renamed as JCSAT-1B. It was driven to the 150°East position where it replaced JCSAT-1.
The satellite experienced an anomaly on January 17, 2007 on one of its thrusters. But after the operator designed a control scheme to handle the satellite without the failed thruster, it was put back into service.