Inverse hyperbolic functions


In mathematics, the inverse hyperbolic functions are the inverse functions of the hyperbolic functions.
For a given value of a hyperbolic function, the corresponding inverse hyperbolic function provides the corresponding hyperbolic angle. The size of the hyperbolic angle is equal to the area of the corresponding hyperbolic sector of the hyperbola, or twice the area of the corresponding sector of the unit hyperbola, just as a circular angle is twice the area of the circular sector of the unit circle. Some authors have called inverse hyperbolic functions "area functions" to realize the hyperbolic angles.
Hyperbolic functions and their inverses occur in many linear differential equations, for example the equation defining a catenary, of some cubic equations, in calculations of angles and distances in hyperbolic geometry and of Laplace's equation in Cartesian coordinates. Laplace's equations are important in many areas of physics, including electromagnetic theory, heat transfer, fluid dynamics, and special relativity.

Notation

The most common abbreviations are those specified by the ISO 80000-2 standard. They consist of ar- followed by the abbreviation of the corresponding hyperbolic function.
However, arc-, followed by the corresponding hyperbolic function
, is also commonly seen by analogy with the nomenclature for inverse trigonometric functions. The former are misnomers, since the prefix arc is the abbreviation for arcus, while the prefix ar stands for area.
Other authors prefer to use the notation argsinh, argcosh, argtanh, and so on, where the prefix arg is the abbreviation of the Latin argumentum. In computer science this is often shortened to asinh.
The notation,, etc., is also used, despite the fact that care must be taken to avoid misinterpretations of the superscript −1 as a power as opposed to a shorthand to denote the inverse function (e.g., versus

Definitions in terms of logarithms

As the hyperbolic functions are rational functions of whose numerator and denominator are of degree at most two, these functions may be solved in terms of, by using the quadratic formula; then, taking the natural logarithm gives the following expressions for the inverse hyperbolic functions.
For complex arguments, the inverse hyperbolic functions, the square root and the logarithm are multi-valued functions, and the equalities of the next subsections may be viewed as equalities of multi-valued functions.
For all inverse hyperbolic functions but the inverse hyperbolic cotangent and the inverse hyperbolic cosecant, the domain of the real function is connected.

Inverse hyperbolic sine

Inverse hyperbolic sine aka area hyperbolic sine :
The domain is the whole real line.

Inverse hyperbolic cosine

Inverse hyperbolic cosine aka area hyperbolic cosine :
The domain is the closed interval.

Inverse hyperbolic tangent

Inverse hyperbolic tangent aka area hyperbolic tangent :
The domain is the open interval .

Inverse hyperbolic cotangent

Inverse hyperbolic cotangent aka area hyperbolic cotangent :
The domain is the union of the open intervals and .

Inverse hyperbolic secant

Inverse hyperbolic secant aka area hyperbolic secant :
The domain is the semi-open interval.

Inverse hyperbolic cosecant

Inverse hyperbolic cosecant aka area hyperbolic cosecant :
The domain is the real line with 0 removed.

Addition formulae

Other identities

Composition of hyperbolic and inverse hyperbolic functions

Composition of inverse hyperbolic and trigonometric functions

Conversions

Derivatives

For an example differentiation: let θ = arsinh x, so :

Series expansions

Expansion series can be obtained for the above functions:
Asymptotic expansion for the arsinh x is given by

Principal values in the complex plane

As functions of a complex variable, inverse hyperbolic functions are multivalued functions that are analytic except at a finite number of points. For such a function, it is common to define a principal value, which is a single valued analytic function which coincides with one specific branch of the multivalued function over a domain consisting of the complex plane in which a finite number of arcs have been removed. These arcs are called branch cuts. For specifying the branch, that is defining which value of the multivalued function is considered at each point, one generally define it at a particular point, and deduce the value everywhere in the domain of definition of the principal value by analytic continuation. When possible, it is better to define the principal value directly, without referring to analytic continuation.
For example, for the square root, the principal value is defined as the square root that has a positive real part. This defines a single valued analytic function, which is defined everywhere except for non-positive real values of the variables. This principal value of the square root function is denoted in what follows. Similarly, the principal value of the logarithm, denoted in what follows, is defined as the value for which the imaginary part has the smallest absolute value. It is defined everywhere except for non positive real values of the variable, for which two different values of the logarithm reach the minimum.
For all inverse hyperbolic functions, the principal value may be defined in terms of principal values of the square root and the logarithm function. However, in some cases, the formulas of do not give a correct principal value, as giving a domain of definition which is too small and, in one case non-connected.

Principal value of the inverse hyperbolic sine

The principal value of the inverse hyperbolic sine is given by
The argument of the square root is a non-positive real number if and only if belongs to one of the intervals and of the imaginary axis. If the argument of the logarithm is real, then it is positive. Thus this formula defines a principal value for arsinh with branch cuts and . This is optimal, as the branch cuts must connect the singular points and to the infinity.

Principal value of the inverse hyperbolic cosine

The formula for the inverse hyperbolic cosine given in is not convenient, as, with principal values of the logarithm and the square root, the principal value of arcosh would not be defined for imaginary. Thus the square root has to be factorized, leading to
The principal values of the square roots are both defined except if belongs to the real interval. If the argument of the logarithm is real, then is real and has the same sign. Thus, the above formula defines a principal value of arcosh outside the real interval, which is thus the unique branch cut.

Principal values of the inverse hyperbolic tangent and cotangent

The formulas given in suggests
for the definition of the principal values of the inverse hyperbolic tangent and cotangent. In these formulas, the argument of the logarithm is real if and only if is real. For artanh, this argument is in the real interval if belongs either to or to. For arcoth, the argument of the logarithm is in if and only if belongs to the real interval.
Therefore, these formulas define convenient principal values, for which the branch cuts are and for the inverse hyperbolic tangent, and for the inverse hyperbolic cotangent.
In view of a better numerical evaluation near the branch cuts, some authors use the following equivalent definition of the principal values, although the second one introduces a removable singularity at.

Principal value of the inverse hyperbolic cosecant

For the inverse hyperbolic cosecant, the principal value is defined as
It is defined when the arguments of the logarithm and the square root are not non-positive real numbers. The principal value of the square root is thus defined outside the interval of the imaginary line. If the argument of the logarithm is real, then is a non-zero real number, and this implies that the argument of the logarithm is positive.
Thus the principal value is defined by the above formula outside the branch cut consisting of the interval of the imaginary line.
For , there is a singular point that is included in the branch cut.

Principal value of the inverse hyperbolic secant

Here, as in the case of the inverse hyperbolic cosine, we have to factorize the square root. This gives the principal value
If the argument of a square root is real, then is real, and it follows that both principal values of square roots are defined except if is real and belongs to one of the intervals and. If the argument of the logarithm is real and negative, then is also real and negative. It follows that the principal value of arsech is well defined by the above formula outside two branch cuts, the real intervals and.
For , there is a singular point that is included in one of the branch cuts.

Graphical representation

In the following graphical representation of the principal values of the inverse hyperbolic functions, the branch cuts appear as discontinuities of the color. The fact that the whole branch cuts appear as discontinuities, shows that these principal values may not be extended into analytic functions defined over larger domains. In other words, the above defined branch cuts are minimal.