Institution of Engineering and Technology
The Institution of Engineering and Technology is a multidisciplinary professional engineering institution. The IET was formed in 2006 from two separate institutions: the Institution of Electrical Engineers, dating back to 1871, and the Institution of Incorporated Engineers dating back to 1884. Its worldwide membership is currently in excess of 168,000. The IET's main offices are in Savoy Place in London, England and at Michael Faraday House in Stevenage, England.
In the United Kingdom, the IET has the authority to establish professional registration for the titles of Chartered Engineer, Incorporated Engineer, Engineering Technician, and ICT Technician, as a licensed member institution of the Engineering Council.
The IET is registered as a charity in England and Wales, and in Scotland.
Formation
Discussions started in 2004 between the IEE and the IIE about merging to form a new institution. In September 2005, both institutions held votes of the merger and the members voted in favour. This merger also needed government approval, so a petition was then made to the Privy Council of the United Kingdom for a Supplemental Charter, to allow the creation of the new institution. This was approved by the Privy Council on December 14, 2005, and the new institution emerged on March 31, 2006.History of the IEE
The Society of Telegraph Engineers was formed on May 17, 1871, and it published the Journal of the Society of Telegraph Engineers from 1872 through 1880. Carl Wilhelm Siemens was first President of IEE in 1872. On December 22, 1880, the STE was renamed as the Society of Telegraph Engineers and of Electricians and, as part of this change, it renamed its journal the Journal of the Society of Telegraph Engineers and of Electricians and later the Journal of the Society of Telegraph-Engineers and Electricians. Following a meeting of its Council on 10 November 1887, it was decided to adopt the name of the Institution of Electrical Engineers. As part of this change, its Journal was renamed Journal of the Institution of Electrical Engineers in 1889, and it kept this title through 1963. In 1921, the Institution was Incorporated by royal charter and, following mergers with the Institution of Electronic and Radio Engineers in 1988 and the Institution of Manufacturing Engineers in 1990, it had a worldwide membership of around 120,000. The IEE represented the engineering profession, operated Professional Networks, had an educational role including the accreditation of degree courses and operated schemes to provide awards scholarships, grants and prizes. It was well known for publication of the IEE Wiring Regulations which now continue to be written by the IET and to be published by the British Standards Institution as BS 7671.The IET hosts the archive for the Women's Engineering Society and it has also provided office space for WES since 2005.
History of the IIE
The modern Institution of Incorporated Engineers traced its heritage to The Vulcanic Society that was founded in 1884 and became the Junior Institution of Engineers in 1902, which became the Institution of General Technician Engineers in 1970. It changed its name in 1976 to the Institution of Mechanical and General Technician Engineers. At this point it merged with the Institution of Technician Engineers in Mechanical Engineering and formed the Institution of Mechanical Incorporated Engineers in 1988. The Institution of Engineers in Charge, which was founded in 1895, was merged into the Institution of Mechanical Incorporated Engineers in 1990.The Institution of Electrical and Electronic Technician Engineers, the Society of Electronic and Radio Technicians, and the Institute of Practitioners in Radio and Electronics merged in 1990 to form the Institution of Electronics and Electrical Incorporated Engineers.
The IIE was formed in April 1998 by the merger of The Institution of Electronic and Electrical Incorporated Engineers, The Institution of Mechanical Incorporated Engineers, and The Institute of Engineers and Technicians. In 1999 there was a further merger with The Institution of Incorporated Executive Engineers. The IIE had a worldwide membership of approximately 40,000.
History of the Institution of Manufacturing Engineers
The Institution of Manufacturing Engineers, formerly the Institution of Production Engineers, was founded following the initiative of one H. E. Honer who wrote to a technical periodical titled ‘Engineering Production’ suggesting that the time was ripe to form an institution for the specialised interests of engineers engaged in manufacture. As a result of correspondence generated by this letter a meeting was held at Cannon Street Hotel in London on 26 February 1921. At this meeting it was decided to form the IProdE in order to; establish the status and designation of production or manufacturing engineers; to promote the science of practical production in industry; and to facilitate the interchange of ideas between engineers, manufacturers and other specialists.The term ‘production engineering’ came into use to describe the management of factory production techniques first developed by Henry Ford, which had expanded greatly during the First World War. The IProdE was incorporated in 1931 and was granted its armorial bearings in 1937. From the outset the Institution operated through decentralised branches called local sections wherever a sufficient number of members existed. These local sections were self-governing and elected their own officers. Local sections held monthly meetings at which papers were read and discussed.
Outstanding papers were published in the Institution's journal. Named papers commemorating the work of the following eminent production engineers were read at national meetings: Viscount Nuffield, Sir Alfred Herbert, Colonel George Bray, Lord Sempill, E. H. Hancock, and J. N. Kirby. National and regional conferences were also arranged dealing with specific industrial problems. Active councils were gradually established worldwide including in Australia, Canada, India, New Zealand, and South Africa. The Institution's education committee established a graduate examination which all junior entrants undertook from 1932 onwards. An examination for Associate Membership was introduced in 1951.
The Second World War further accelerated developments in production engineering and by 1945 membership of the IProdE stood at 5,000. The 1950s and 1960s were perhaps the most fruitful period for the Institution. Major conferences such as ‘The Automatic Factory’ in 1955 ensured that the Institution held a place at the forefront of production technology. A Royal Charter was granted in 1964 and membership stood at over 17,000 by 1969.
In 1981 the IProdE instituted four medals as part of its Diamond Jubilee celebrations comprising; the International Award, the Mensforth Gold Medal, the Nuffield Award and the Silver Medal. The Mensforth Gold Medal was named after Sir Eric Mensforth, founder and chairman of Westland Helicopters and a former IProdE President. The medal was awarded to British recipients who had made an outstanding contribution to the advancement of production engineering technology. Today the Mensforth Manufacturing Gold Medal is the IET's premier manufacturing award.
Financial constraints, a slowing in membership and a blurring of distinctions between the various branches of engineering led the IProdE to merger proposals in the late 1980s. The Institution of Electrical Engineers had interests very close to those of the IProdE. The IEE was a much larger organisation than the IProdE and the proposal was that the IProdE should be represented as a specialist division within the IEE. While these talks were reaching fruition in 1991 the IProdE changed its name to the Institution of Manufacturing Engineers. A merger with the IEE took place the same year, with the IMfgE becoming the IEE's new Manufacturing Division.
IET Presidents
The IET is governed by the President and Board of Trustees. The IET Council, on the other hand, serves as the advisory and consultative body, representing views of the members at large and offering advice to the Board of Trustees. Since founding the IET, several prominent engineers have served as its President and the recent Presidents are listed below:- 2019 Peter William Bonfield OBE FREng BSc MSc PhD
- 2018 Michael Douglas Carr OBE FREng BSc HonDTech
- 2017 Nick Winser CBE FREng BSc
- 2016 Jeremy Daniel McK Watson CBE FREng MSc DPhil
- 2015 Naomi Climer FREng BSc
- 2014 William Timothy Webb FREng BEng MBA PhD
- 2013 Commodore Barry P S Brooks BSc Royal Navy
- 2012 Andy Hopper CBE FRS FREng
- 2011 Michael John Short FREng BA
- 2010 Nigel John Burton BSc PhD
- 2009 Christopher Maxwell Snowden FRS FREng
- 2008 Christopher Martin Earnshaw FREng BSc
- 2007 John Neil Loughhead BSc MSc DIC FCGI
- 2006 Sir Robin Saxby BEng FREng
- 2005 Sir John Chisholm MA FREng
- 2004 Professor John O'Reilly FREng
- 2003 Sir David Brown FREng CEng BSc DMS
- 2002 Professor Michael John Howard Sterling FREng
- 2001 Professor Brian Mellitt FREng DIC
- 2000 Professor John Edwin Midwinter FREng FRS
Purpose and function
The IET also grants Chartered Engineer, Incorporated Engineer, Engineering Technician, and ICT Technician professional designations on behalf of the Engineering Council UK. IEng is roughly equivalent to North American Professional Engineer designations and CEng is set at a higher level. Both designations have far greater geographical recognition. This is made possible through a number of networks for engineers established by the IET including the Professional Networks, worldwide groups of engineers sharing common technical and professional interests. Through the IET website, these networks provide up-to-date sector-specific news, stock a library of technical articles and give members the opportunity to exchange knowledge and ideas with peer groups through dedicated discussion forums. Particular areas of focus include education, IT, energy and the environment.
The IET has an educational role, seeking to support its members through their careers by offering a professional home for life, producing advice and guidance at all levels to secure the future of engineering. For instance, the IET accredits degree courses worldwide in subjects relevant to electrical, electronic, manufacturing and information engineering. In addition, it secures funding for professional development schemes for engineering graduates including awards scholarships, grants and prizes.
For the public, the IET website provides on topics such as solar power, nuclear power, fuel cells, micro-generation and the possible effects on health of mobile phones and power lines. The IET runs the bibliographic information service Inspec, which is a major indexing database of scientific and technical literature and publishes books, journals such as Electronics Letters, magazines such as Engineering & Technology and conference proceedings. Over 80,000 technical articles are available via the .
IET.tv is one of the world's largest collated resources of authoritative and multidisciplinary engineering and technology content. Comprising in excess of 6,500 presentation, lecture and training videos, this high quality engineering information offers research insight, workflow solutions and access to inspirational events and expert communities. With a range of search and user functionalities, IET.tv enables online video access to a range of topics and expertise. IET.tv also has an YouTube presence, where it publishes a wide variety of content related to engineering and technology.
Membership & Fellow
The IET has several categories of membership, some with designatory postnominals:- Honorary Fellow
- Fellow
- Member
- Associate
- Student
Publications
Electronics Letters is a peer-reviewed rapid-communication journal, which publishes short original research papers every two weeks. Its scope covers developments in all electronic and electrical engineering related fields. Also available to Electronics Letters subscribers are something called the Insight Letters.
Micro & Nano Letters, first published in 2006, specialises in the rapid online publication of short research papers concentrating on advances in miniature and ultraminiature structures and systems that have at least one dimension ranging from a few tens of micrometres to a few nanometres. It offers a rapid route for international dissemination of research findings generated by researchers from the micro and nano communities.
Awards and scholarships
Achievement Medals
The IET Achievement Medals are awarded to individuals who have made major and distinguished contributions in the various sectors of science, engineering and technology. The medals are named after famous engineers and persons, such as Michael Faraday, John Ambrose Fleming, J. J. Thomson, and Oliver Heaviside. The judging panel look for outstanding and sustained excellence in one or more activities. For example: research and development, innovation, design, manufacturing, technical management, and the promotion of engineering and technology.- Faraday Medal
- J J Thomson Medal for Electronics
- Ambrose Fleming Medal
- Mensforth Manufacturing Gold Medal
- Mountbatten Medal
Other Recognitions
- IET Volunteer Medal
- Young Woman Engineer
Scholarships