Icicle hitch


An icicle hitch is a knot that is excellent for connecting to a post when weight is applied to an end running parallel to the post in a specific direction. This type of hitch will hold its place even when holding a substantial load on a smooth surface. One can even suspend from a tapered post with this knot.
To tie an icicle hitch, bring the working end over the post, front to back, four or five times, working away from the end of the post. Bring the working end, back to front, alongside the standing end, leaving a substantial bight hanging behind the post. Bring this bight over both ends and over the end of the post. Tighten by pulling both ends perpendicular to the post. The pull on the standing end will tighten the knot as more pull is given.
This knot is similar to the Prusik knot and the Klemheist knot. This class of knots is a "slip-and-grip" friction type that will pull tight when the load is applied in the correct direction and slide easily for placement with no load. The Prusik knot can withstand load in both directions, making it ideal for climbing situations. Upon examination of the icicle hitch, one finds that it operates under the same principle as the Klemheist knot and is in fact the same knot tied only with a bight in the end instead of the more common short loop used for climbing.
This knot was first demonstrated at the eighth Annual General Meeting of the International Guild of Knot Tyers in 1990.

Tying