Humphrey cycle


The Humphrey cycle is a thermodynamic cycle similar to the pulse detonation engine and pulse compression detonation system cycles. It may be considered to be a modification of the Brayton cycle in which the constant-pressure heat addition process of the Brayton cycle is replaced by a constant-volume heat addition process.
Hence, the ideal Humphrey cycle consists of 4 processes:
  1. Reversible, adiabatic compression of the incoming gas. During this step incoming gas is compressed, usually by turbomachinery. Stagnation pressure and temperature increase because of the work done on the gas by the compressor. Entropy is unchanged. Static pressure and density of the gas increase.
  2. Constant-volume heat addition. In this step, heat is added while the gas is kept at constant volume. In most cases, Humphrey-cycle engines are considered open cycles which makes it difficult to have a "constant volume" during the addition of heat. Hence, instead of a deflagrative flame, which is commonly used in Brayton cycles, the combustion mode is detonative. In being detonative, the heat addition happens only for a small sector volume of premixture at a constant volume, while the remaining sections refill the chamber with fresh incoming premixture. This method allows for continuous flow in the system while at the same time achieving the pseudo constant volume requirement for the heat addition process.
  3. Reversible, adiabatic expansion of the gas. During this step incoming gas is expanded, usually by turbomachinery. Stagnation pressure and temperature decrease because of the work extracted from the gas by the turbine. Entropy is unchanged. Static pressure and density of the gas decrease.
  4. Constant-pressure heat rejection. In this step, heat is removed from the working fluid while the fluid remains at constant pressure. In open-cycle engines this process usually represents expulsion of the gas from the engine, where it quickly equalizes to ambient pressure and slowly loses heat to the atmosphere, which is considered to be an infinitely large reservoir for heat storage, with constant pressure and temperature.