HpH 304 is a family of sailplanes ranging from a single-seat composite15 metre Class to a two-place 20 metre Open Classmanufactured by the Czech company HpH Ltd. The sailplane was derived from a glider made by Glasflügel between 1980 and 1982 that was put back in production by HpH and who have modified it substantially and developed new models since.
Development by Glasflügel
The 304 was the second and last glider developed by Glasflügel in cooperation with Schempp-Hirth. It superseded the Glasflügel Mosquito. The principal designer of the 304 was Martin Hansen, known for his role in the design of the Akaflieg Braunschweig SB-11. The glider continued the Glasflügel tradition of innovation: the parallelogram control stick, combined trailing edge flaps and airbrakes, automatic trimming, heel-operated brakes, automatic control connections, the extremely easy assembly of the wings and tailplane, the parallelogram forward-opening canopy and lifting instrument panel are Glasflügel innovations largely copied by other manufacturers. The prototype flew for the first time in May 1980 and entered production shortly after. Glasflügel was financially struggling at that time, following the untimely death of Eugen Hänle, the founder of the company, in 1975. A partnership with Schempp-Hirth led to a surrender of technology. Lacking investment and an energetic leadership, the company folded in 1982. A small batch was later built by the Jastreb company in Yugoslavia as the 304B. The 304 is sometimes referred to as the H-304, which is not correct, as the H applies only to the Glasflügel sailplanes designed principally by Wolfgang Hütter.
Development by HpH
The 304 was put back in production by the Czech company HpH Ltd, as the Glasflügel 304CZ. This new production run uses the original Glasflügel moulds and jigs that fortunately were not lost with the demise of the company. The 304CZ was updated with the addition of winglets and a few other changes, and has spawned several derivatives, namely a 17.43 metre span variant 304 CZ-17 and the 15 metre Standard Class304 C Wasp. In November 2006, HPH conducted the maiden flight of the completely new 18 metre 304 S Shark. The 304 S Shark features an all new wing design using the HpH xn2 profile with the airfoil only 13.2% of the cord thickness. The 18 metre wing yields a best glide of 51:1 and minimum sink of 0.44 m/s. The new Safety Cockpit uses a Carbon/Kevlar safety shell that meets the latest EASASafety Standards. The 304 S is larger than the 304 C and while interchangeable wing extensions are available for 15-metre or 18-metre span, the most common configuration is the 18-metre version. The Shark is available in Self-Launch Versions using the popular Solo 2625-01 powerplant, or as a sustainer using either a 400 N thrust Jet powerplant or with a Front-Electric-Sustainer solution. By early 2015 about 50 HPH Shark sailplanes had been produced with about 50% being Self-launchers, the remainder being sustainers of one type or another.
Variants
;304 ;304 B ;304 CZ ;304 CZ-17 ;304 C Wasp ;304 Shark ;304 Shark SJ ;304 Shark ES ;304 Shark MS ;304 TS Twin Shark
