Host–guest chemistry
In supramolecular chemistry,[] host–guest chemistry describes complexes that are composed of two or more molecules or ions that are held together in unique structural relationships by forces other than those of full covalent bonds. Host–guest chemistry encompasses the idea of molecular recognition and interactions through non-covalent bonding. Non-covalent bonding is critical in maintaining the 3D structure of large molecules, such as proteins and is involved in many biological processes in which large molecules bind specifically but transiently to one another.
Although non-covalent interactions could be roughly divided into those with more electrostatic or dispersive contributions, there are few commonly mentioned types of non-covalent interactions: ionic bonding, hydrogen bonding, van der Waals forces and hydrophobic interactions.
Overview
Host–guest chemistry is a branch of supramolecular chemistry in which a host molecule forms a chemical compound with a guest molecule or ion. The two components of the compound are held together by non-covalent forces, most commonly by hydrogen-bonding. Binding between host and guest is usually highly specific to the two moieties concerned. The formation of these complexes is central to the subject of molecular recognition.There is an equilibrium between the unbound state, in which host and guest are separate from each other, and the bound state, in which there is a structurally defined host–guest complex:
The "host" component can be considered the larger molecule, and it encompasses the smaller, "guest", molecule. In biological systems, the analogous terms of host and guest are commonly referred to as enzyme and substrate respectively.
In order to design synthetic systems that perform specific functions and tasks, it is very important to understand the thermodynamics of binding between host and guest. Chemists are focusing on the energy exchange of different binding interactions and trying to develop scientific experiments to quantify the fundamental origins of these non-covalent interactions by utilizing various techniques such as NMR spectroscopy, UV/visible spectroscopy and isothermal titration calorimetry,. Quantitative analysis of binding constant values provides useful thermodynamic information.
Thermodynamic principles of host–guest interactions
The thermodynamic benefits of host–guest chemistry are derived from the idea that there is a lower overall Gibbs free energy due to the interaction between host and guest molecules. Chemists are exhaustively trying to measure the energy and thermodynamic properties of these non-covalent interactions found throughout supramolecular chemistry; and by doing so hope to gain further insight into the combinatorial outcome of these many, small, non-covalent forces that are used to generate an overall effect on the supramolecular structure.An association constant, can be defined by the expression
where is the thermodynamic activity of the complex at equilibrium. represents the activity of the host and the activity of the guest. The quantities, and are the corresponding concentrations and is a quotient of activity coefficients.
In practice the equilibrium constant is usually defined in terms of concentrations.
When this definition is used, it is implied that the quotient of activity coefficients has a numerical value of one. It then appears that the equilibrium constant, has the dimension 1/concentration, but that cannot be true since the standard Gibbs free energy change, is proportional to the logarithm of K.
This apparent paradox is resolved when the dimension of is defined to be the reciprocal of the dimension of the quotient of concentrations. The implication is that is regarded as having a constant value under all relevant experimental conditions. Nevertheless it is common practice to attach a dimension, such as millimole per litre or micromole per litre, to a value of K that has been determined experimentally.
A Large value indicates that host and guest molecules interact strongly to form the host–guest complex.
Determination of binding constant values
Simple host–guest complexation
When the host and guest molecules combine to form a single complex the equilibrium is represented asand the equilibrium constant, K, is defined as
where denotes the concentration of a chemical species X.
The mass-balance equations, at any data point,
where and represent the total concentrations, of host and guest, can be reduced to a single quadratic equation in, say, and so can be solved analytically for any given value of K. The concentrations and can then derived.
The next step in the calculation is to calculate the value,, of a quantity corresponding to the quantity observed. Then, a sum of squares, U, over all data points, np, can be defined as
and this can be minimized with respect to the stability constant value, K, and a parameter such the chemical shift of the species HG or its molar absorbency. The minimization can be performed in a spreadsheet application such as EXCEL by using the in-built SOLVER utility.
This procedure should be used only when it is certain that the 1:1 adduct is the only complex species formed. A simple check on the validity of this assertion is that the residuals, should show a random distribution; otherwise the formation of a second species should be considered, using the methods of the following section.
Nuclear magnetic resonance (NMR) data
With nuclear magnetic resonance spectra the observed chemical shift value,, arising from a given atom contained in a reagent molecule and one or more complexes of that reagent, will be the concentration-weighted average of all shifts of those chemical species. Chemical exchange is assumed to be rapid on the NMR time-scale.terms of mole fractions,
is the chemical shift of the ith chemical species which contains the nucleus and is the concentration /mole fraction of that species. This expression has the same mathematical form as Beer's law. Chemical shift values may be obtained for more than one nucleus in an analogous way that absorbance may be measured at more than one wavelength. Typical isotopes that may be used in this context are 1H,13C and 31P. It is usual to use a deuterated solvent when measuring 1H chemical shift values.
Absorbance data
It is assumed that the absorbance of each species is proportional to the concentration of that species, according to the Beer-Lambert law.where λ is a wavelength, is the optical path length of the cuvette which contains the solution of the N compounds,
is the molar absorbance of the ith chemical species at the wavelength λ, ci is its concentration. When the concentrations have been calculated as above and absorbance has been measured for samples with various concentrations of host and guest, the Beer-Lambert law provides a set of equations, at a given wavelength, that which can be solved by a linear least-squares process for the unknown extinction coefficient values at that wavelength.
Fluorescence data
The treatment of this type of data is similar to the treatment of absorbance data. In fact the equation defining the relation between fluorescent intensity and species' concentrations is very similar.where is the fluorescent intensity of the ith species at unit concentration.
Calorimetry
The heat evolved when an aliquot of host solution is added to a solution containing the guest is the sum of contributions from each reactionwhere is a measured heat change value at data point j, is the amount of heat absorbed or emitted when 1 mole of the ith reaction product is formed and is the actual change in the number of moles of that product at that data point. is calculated by solving the equations of mass-balance with given values of the equilibrium constants. If the equilibrium constant values are known, the standard enthalpy change may be calculated by a linear least-squares process, otherwise a non-linear method of data-fitting must be used.
Isothermal titration calorimetry is commonly used to determine the values of both an equilibrium constant and the corresponding standard reaction enthalpy. The manufactures of ITC instruments supply some software with which these quantities may be obtained from experimental data values.
General complexation reaction
For each equilibrium involving a host, H, and a guest Gthe equilibrium constant,, is defined as
The values of the free concentrations, and are obtained by solving the equations of mass balance with known or estimated values for the stability constants.
Then, the concentrations of each complex species may also be calculated as. The relationship between a species' concentration and the measured quantity is specific for the measurement technique, as indicated in each section above. Using this relationship, the set of parameters, the stability constant values and values of properties such as molar absorptivity or specified chemical shifts, may be refined by a non-linear least-squares refinement process. For a more detailed exposition of the theory see Determination of equilibrium constants.
Some dedicated computer programs are listed at Implementations.
Determination of standard enthalpy and entropy change values
Consider, first, the system where a solution contains certain amounts of a host, H, and a guest, G, in equilibrium with the single complex HG.Now suppose that a small amount of guest is added to a mixture of host and guest at equilibrium. A new equilibrium will then be established and a quantity of heat, Q will be evolved. When this quantity has been measured and corrected for instrumental factors it is related to the change in the amount of the complex HG that is present in solution.
where ΔH⊖ is the standard enthalpy of formation, that is, the enthalpy for the formation of 1 mole of the complex, HG and is the change in the number of moles of the species HG in solution.
If the value of the equilibrium constant,, is known, the quantity can be calculated by solving the equations of mass-balance before and after the addition. Then, the value of ΔH⊖ can be obtained using the method of linear least-squares fitting with a series of experimental values of Q.
If the value of K is not known, a non-linear least-squares refinement must be performed to obtain the two parameters, and. When the data are obtained using an Isothermal titration calorimetry the software required for the calculations is supplied by instrument manufacturer.
Note: use of the van 't Hoff equation to calculate the standard enthalpy change is deprecated because the value obtained using this method is likely to be subject to excessive error.
In general, when m complexes are formed the heat developed at the kth "titration" point is the sum of the contributions resulting from a change in concentration of a reaction product.
There are 2m parameter to be determined, a standard enthalpy change and an equilibrium constant for the formation of each reaction product. ITC instrument manufacturers supply a few specific software products with which multiple parameter values may be calculated. Computer programs for the general case such as . are also available.
When the values of each standard enthalpy change and equilibrium constant have been determined, the value of the corresponding standard entropy change may be derived from the expression
at the given temperature, T.
Experimental techniques
Nuclear magnetic resonance
is one of the most powerful spectroscopic techniques in analytical chemistry. It is an important tool for the studies of host–guest complexes, for elucidating the structures of the various complexes existing in the form of aggregates, ion pair or encapsulated systems. As the name suggests, NMR identifies the different nuclei in the molecules, by measuring their chemical shift. The binding activity of two molecules causes a considerable change in their electronic environments. This leads to a shift in the signals in the NMR spectrum, and this basic principle is made use of to study the phenomena of host–guest chemistry. The driving forces for host–guest binding are the various secondary interactions between molecules, such as hydrogen bonding and pi–pi interaction. Thus, NMR also serves as an important technique to establish the presence of these interactions in a host–guest complex.Previous NMR studies have given useful information about the binding of different guest to hosts. Fox et al. calculated the hydrogen-bond interactions between pyridine molecules and poly dendrimer; on the basis of the chemical shift of the amine and the amide groups. In a similar study, Xu et al. titrated carboxylate based G4 PAMAM dendrimer with various amine based drugs and monitored the chemical shifts of the dendrimer. In conjunction with the 2D-NOESY NMR techniques, they were able to precisely locate the position of the drugs on the dendrimers and the effect of functionality on the binding affinity of the drugs. They found conclusive evidence to show that the cationic drug molecules attach on the surface of anionic dendrimers by electrostatic interactions, whereas an anionic drug localizes both in the core and the surface of the dendrimers, and that the strength of these interactions are dependent on the pKa values of the molecules.
In a different study, Sun et al. studied the host–guest chemistry of ruthenium trisbipyridyl-viologen molecules with cucurbituril. Whilst monitoring the change in the chemical shifts of the pyridine protons on viologen, they found that the binding modes for the 1:1 complexes are completely different for different cucurbituril molecules.
An important factor that has to be kept in mind while analyzing binding between the host and the guest is the time taken for data acquisition compared to the time for the binding event. In a lot of cases, the binding events are much faster than the time-scale of data acquisition, in which case the output is an averaged signal for the individual molecules and the complex. The NMR timescale is of the order of milliseconds, which in certain cases when the binding reaction is fast, limits the accuracy of the technique.
Ultraviolet–visible spectroscopy
is one of the oldest and quickest methods of studying the binding activity of various molecules. The absorption of UV-light takes place at a time-scale of picoseconds, hence the individual signals from the species can be observed. At the same time, the intensity of absorption directly correlates with the concentration of the species, which enables easy calculation of the association constant. Most commonly, either the host or the guest is transparent to UV-light, whilst the other molecule is UV-sensitive. The change in the concentration of the UV-sensitive molecules is thus monitored and fitted onto a straight line using the Benesi–Hildebrand method, from which the association constant can be directly calculated.Additional information about the stoichiometry of the complexes is also obtained, as the Benesi–Hilderbrand method assumes a 1:1 stoichiometry between the host and the guest. The data will yield a straight line only if the complex formation also follows a similar 1:1 stoichiometry. A recent example of a similar calculation was done by Sun et al., wherein they titrated ruthenium trisbipyridyl-viologen molecules with cucurbiturils and plotted the relative absorbance of the cucurbit molecules as a function of its total concentration at a specific wavelength. The data nicely fitted a 1:1 binding model with a binding constant of.
As an extension, one can fit the data to different stoichiometries to understand the kinetics of the binding events between the host and the guest. made use of this corollary to slightly modify the conventional Benesi–Hilderbrand plot to get the order of the complexation reaction between barium-containing crown ether bridged chiral heterotrinuclear salen Zn complex with various guests imidazoles and amino acid methyl esters, along with the other parameters. They titrated a fixed concentration of the zinc complex with varying amounts of the imidazoles and methyl esters whilst monitoring the changes in the absorbance of the pi-to-pi* transition band at 368 nm. The data fit a model in which the ratio of guest-to-host is 2 in the complex. They further carried these experiments at various temperatures which enabled them to calculate the various thermodynamic parameters using the van 't Hoff equation.
Isothermal titration calorimetry
Spectroscopic techniques give information about the binding constant and Gibbs free energy,. To get the complete set of thermodynamic parameters such as and, a van 't Hoff analysis using the van 't Hoff equation would be required. However, recent advents in calorimetric techniques allows for the measurement of and in a single experiment, thus enabling determination of all the thermodynamic parameters using the equation:provided that the experiment is carried out under isothermal conditions; hence the name isothermal calorimetry.
The procedure is similar to a conventional titration procedure wherein the host is added sequentially to the guest and the heat absorbed or evolved is measured, compared to a blank solution. The total heat released, Q, corresponds to the association constant,, and by the equation:
Which can be simplified as
Where
The above equation can be solved by non-linear regression analysis to obtain the value of and and subsequently and for that particular reaction.
The advantages of isothermal titration calorimetry over the other commonly used techniques, apart from giving the entire set of thermodynamic parameters, are that it is more general and suited for a wide range of molecules. It is not necessary to have compounds with chromophores or UV-visible functional groups in order to monitor the binding process as the heat signal is a universal property of binding reactions. At the same time, the signal-to-noise ratio is pretty favorable which allows for more accurate determination of the binding constants, even under very dilute conditions.
A recent example of the use of this technique was for studying the binding affinity of the protein membrane surrounding Escherichia coli to lipophilic cations used in drugs in various membrane mimetic environments. The motivation for the above study was that these membranes render the bacteria resistant to most compounds based on quaternary ammonium cation, which have the anti-bacterial effects. Thus an understanding of the binding phenomena would enable design of effective antibiotics for E. coli. The researchers maintained a large excess of the ligand over the protein to allowing the binding reaction to go to completion. Using the above equations the researchers proceeded to calculate,, and for each drug in different environments. The data indicated that the binding stoichiometry of the drug with the membrane was 1:1 with a micromolar value of. The negative values of, and indicated that the process was enthalpy driven with a value of 8–12 kcal/mol for each drug.
Applications
Raman spectroscopy
is a spectroscopic technique used in the study of molecules which exhibit a Raman scattering effect when monochromatic light is incident on it. The basic requirement to get a Raman signal is that the incident light brings about an electronic transition in the chemical species from its ground state to a virtual energy state, which will emit a photon on returning to the ground state. The difference in energy between the absorbed and the emitted photon is unique for each chemical species depending on its electronic environment. Hence, the technique serves as an important tool for study of various binding events, as binding between molecules almost always results in a change in their electronic environment. However, what makes Raman spectroscopy a unique technique is that only transitions which are accompanied by a change in the polarization of the molecule are Raman active. The structural information derived from Raman spectra gives very specific information about the electronic configuration of the complex as compared to the individual host and guest molecules.Solution-phase Raman spectroscopy often results in a weak scattering cross-section. Therefore, recent advances have been made to enhance the Raman signals, such as surface enhanced Raman spectroscopy, and Resonance Raman spectroscopy. Such techniques serve an additional purpose of quantifying the analyte-receptor binding events, giving a more detailed picture of the host–guest complexation phenomena where they actually take place; in solutions. In a recent breakthrough, Flood et al. determined the binding strength of tetrathiafulvalene and cyclobis using Raman spectroscopy as well as SERS. Prior work in this field was aimed at providing information on the bonding and the structure of the resulting complex, rather than quantitative measurements of the association strengths. The researchers had to use Resonance Raman spectroscopy in order to be able to get detectable signals from solutions with concentrations as low as 1 mM. In particular they correlated the intensity of the Raman bands with the geometry of the complex in the photo-excited state. Similar to titration based on ultraviolet–visible spectroscopy, they calculated the binding constant by "Raman titration" and fitted the binding curves to 1:1 models, giving a of −5.7±0.6 kcal/mol. The study is now providing a basis for similar studies involving charge-transfer complexes in solutions.
Cooperativity
Cooperativity is defined to be when a ligand binds to a receptor with more than one binding site, the ligand causes a decrease or increase in affinity for incoming ligands. If there is an increase in binding of the subsequent ligands, it is considered positive cooperativity. If a decrease of binding is observed, then it is negative cooperativity. Examples of positive and negative cooperativity are hemoglobin and aspartate receptor, respectively.In recent years, the thermodynamic properties of cooperativity have been studied in order to define mathematical parameters that distinguish positive or negative cooperativity. The traditional Gibbs free energy equation states:. However, to quantify cooperativity in a host–guest system, the binding energy needs to be considered. The schematic on the right shows the binding of A, binding of B, positive cooperative binding of A–B, and lastly, negative cooperative binding of A–B. Therefore, an alternate form of the Gibbs free energy equation would be
where:
It is considered that if more than the sum of and, it is positively cooperative. If is less, then it is negatively cooperative.
Host–guest chemistry is not limited to receptor-lingand interactions. It is also demonstrated in ion-pairing systems. In recent years, such interactions are studied in an aqueous media utilizing synthetic organometallic hosts and organic guest molecules. For example, a poly-cationic receptor containing copper is coordinated with molecules such as tetracarboxylates, tricarballate, aspartate, and acetate. This study illustrates that entropy rather than enthalpy determines the binding energy of the system leading to negative cooperativity. The large change in entropy originates from the displacement of solvent molecules surrounding the ligand and the receptor. When multiple acetates bind to the receptor, it releases more water molecules to the environment than a tetracarboxylate. This led to a decrease in free energy implying that the system is cooperating negatively. In a similar study, utilizing guanidinium and Cu and polycarboxylate guests, it is demonstrated that positive cooperatively is largely determined by enthalpy. In addition to thermodynamic studies, host–guest chemistry also has biological applications.
Superconductivity
At low temperatures and high pressures, bismuth has been found to exhibit a host–guest structure. This surprisingly leads to strong coupling superconductivity.Biological application
Dendrimers in drug-delivery systems is an example of various host–guest interactions. The interaction between host and guest, the dendrimer and the drug, respectively, can either be hydrophobic or covalent. Hydrophobic interaction between host and guest is considered "encapsulated," while covalent interactions are considered to be conjugated. The use of dendrimers in medicine has shown to improve drug delivery by increasing the solubility and bioavailability of the drug. In conjunction, dendrimers can increase both cellular uptake and targeting ability, and decrease drug resistance.The solubility of various NSAIDs increases when it is encapsulated in PAMAM dendrimers. This study shows the enhancement of NSAID solubility is due to the electrostatic interactions between the surface amine groups in PAMAM and the carboxyl groups found in NSAIDs. Contributing to the increase in solubility are the hydrophobic interactions between the aromatic groups in the drugs and the interior cavities of the dendrimer. When a drug is encapsulated within a dendrimer, its physical and physiological properties remains unaltered, including non-specificity and toxicity. However, when the dendrimer and the drug are covalently linked together, it can be used for specific tissue targeting and controlled release rates. Covalent conjugation of multiple drugs on dendrimer surfaces can pose a problem of insolubility.
This principle is also being studied for cancer treatment application. Several groups have encapsulated anti-cancer medications such as: Camptothecin, Methotrexate, and Doxorubicin. Results from these research has shown that dendrimers have increased aqueous solubility, slowed release rate, and possibly control cytotoxicity of the drugs. Cisplatin has been conjugated to PAMAM dendrimers that resulted in the same pharmacological results as listed above, but the conjugation also helped in accumulating cisplatin in solid tumors in intravenous administration.
Sensing
Traditionally, chemical sensing has been approached with a system that contains a covalently bound indicator to a receptor though a linker. Once the analyte binds, the indicator changes color or fluoresces. This technique is called the indicator-spacer-receptor approach. In contrast to ISR, Indicator-Displacement Assay utilizes a non-covalent interaction between a receptor, indicator, and an analyte. Similar to ISR, IDA also utilizes colorimetric and fluorescence indicators. In an IDA assay, a receptor is incubated with the indicator. When the analyte is added to the mixture, the indicator is released to the environment. Once the indicator is released it either changes color or fluoresces.IDA offers several advantages versus the traditional ISR chemical sensing approach. First, it does not require the indicator to be covalently bound to the receptor. Secondly, since there is no covalent bond, various indicators can be used with the same receptor. Lastly, the media in which the assay may be used is diverse.
Chemical sensing techniques such as C-IDA have biological implications. For example, protamine is a coagulant that is routinely administered after cardiopulmonary surgery that counter acts the anti-coagulant activity of herapin. In order to quantify the protamine in plasma samples, a colorimetric displacement assay is used. Azure A dye is blue when it is unbound, but when it is bound to herapin, it shows a purple color. The binding between Azure A and heparin is weak and reversible. This allows protamine to displace Azure A. Once the dye is liberated it displays a purple color. The degree to which the dye is displaced is proportional to the amount of protamine in the plasma.
F-IDA has been used by Kwalczykowski and co-workers to monitor the activities of helicase in E.coli. In this study they used thiazole orange as the indicator. The helicase unwinds the dsDNA to make ssDNA. The fluorescence intensity of thiazole orange has a greater affinity for dsDNA than ssDNA and its fluorescence intensity increases when it is bound to dsDNA than when it is unbound.