Guntersville Dam is located above the mouth of the Tennessee River, at a point where the southwestward-flowing river begins to change its course to a more northwestwardly direction. The dam's reservoir stretches for nearly to the base of Nickajack Dam, and includes parts of Marshall and Jackson counties in Alabama and Marion County in Tennessee. The reservoir's backwaters have formed embayments on the lower parts of Browns Creek and Spring Creek to the west and east of the city of Guntersville, respectively, effectively placing the city at the tip of a long peninsula.
Capacity
Guntersville Dam is high and wide, and has a generating capacity of 140,400 kilowatts of electricity. The dam's 18-bay spillway has a total discharge capacity of. Its reservoir has a storage capacity of, with reserved for flood control. The reservoir is the most stable reservoir in the TVA system, fluctuating just per year. Guntersville Dam is serviced by a navigation lock. The lock can lift and lower vessels up to between Guntersville Lake and Wheeler Lake. The dam's original lock is now used as an auxiliary lock.
Background and construction
In the early 1900s, the U.S. Army Corps of Engineers investigated several possible dam sites in the Guntersville vicinity in hopes of flooding a significant stretch of the river upstream from the city, which had unreliable water levels and had long been an impediment to major navigation in the upper Tennessee Valley. The Corps recommended building a dam at a site approximately upstream from the present dam site in 1914, but never obtained the necessary funding from Congress. More extensive investigations in the 1920s identified several more sites, including the present dam site, which they called the Coles Bend Bar site. After the Tennessee Valley Authority was formed in 1933, the Authority assumed control of all navigation and flood control projects in the Tennessee Valley. In 1935, TVA followed up the Army Corps investigations, deeming a dam at Guntersville necessary to extend the navigation channel beyond Wheeler Lake, which at that time was under construction. Guntersville Dam was authorized November 27, 1935, and construction began a few days later on December 4. The construction of Guntersville Dam and its reservoir required the purchase of of land, of which were forested and had to be cleared. 1,182 families, 14 cemeteries, and over of roads had to be relocated. A large dike was built to protect the city of Guntersville from reservoir backwaters, and substantial dredging was necessary to extend the navigable channel up to Hales Bar Dam. Widows Bar Dam, a small dam and lock approximately upstream from Guntersville Dam, was partially dismantled and submerged under the lake waters. Guntersville Dam was completed on January 17, 1939, constructed at a cost of $51 million. The dam's lock was designed by the Army Corps of Engineers and went into operation on January 24, 1939. The dam's first generator went online August 8, 1939. The hydroelectric project's components were listed on the National Register of Historic Places in 2016.
