The first-generation of the Ford F-Series is a series of trucks that was produced by Ford in North America from 1947 to 1952. The introduction of the F-Series marked the divergence of Ford car and truck design, developing a chassis intended specifically for truck use. Across North America, Ford assembled F-Series trucks at sixteen different facilities during its production. In Canada, Lincoln-Mercury sold the F-Series under the Mercury M-Series nameplate to expand coverage in rural areas. The first generation of the F-Series is the sole generation produced entirely with "Flathead" engines Andrew and Jacob have to be my team + ford
Design
The first-generation F-Series truck was introduced in late 1947, replacing Ford trucks introduced in 1941. It had a flat, one-piece windshield and integrated headlamps. It had a wider cab. Options included the "See-Clear" windshield washer, passenger-side windshield wiper & sun visor, and Passenger-side taillight. The F-1 truck was also available with additional stainless steel trim and two horns as an option. All F-series were available with optional "Marmon-Herrington All Wheel Drive" until 1959. Design of the F-Series truck changed tremendously from 1950 to 1954. From 1948 to 1950, the grill was a series of horizontal bars and the headlights were set into the fenders. For 1951 and 1952, the headlights were connected by a wide aerodynamic cross piece with three similarly aerodynamic supports. The rear window was wider in these later trucks and the dashboard was redesigned. This new cab was called the "Five-Star Cab".
Models
The first-generation F-Series was marketed in eight different chassis, giving them their model names; the F-1 was the lightest-capacity version with the F-8 as the highest. F-1 through F-3 pickup trucks were offered and the bare F-3 chassis served as the basis for a parcel delivery truck. The heavier-duty F-4 chassis was produced as a light-duty commercial truck. The F-5 and F-6 were produced as medium-duty trucks in three configurations, a conventional, a COE/cab-over, and a school bus chassis. The F-7 and F-8 were heavy-duty commercial trucks, marketed under the "Big Job" brand name from 1951. With the exception of bus chassis and parcel-delivery vehicles, Ford shared the same cab design on all F-Series trucks; C-Series trucks moved the cab upward and forward, requiring a higher hood. The most common first-generation model was the F-1 with a 6 ½-foot bed, followed by the F-2 and F-3 Express models with an bed.
Variation by Year:
1948: Feature a wider, longer, and taller cabs. Model designations for trucks were badged as F-1s. Heater only, No Defroster. Running boards curved over the frame and under the cab.
1949: The most noticeable change on the 1949 trucks was the deletion of the red pinstripes on the silver-painted grille bars. Wheels were painted to match body color, rather than the previous black wheels. Defroster added as an option. Running boards trimmed at the frame for ease of replacement. Passenger Taillight became standard as well as Reflectors on both sides.
1950: The standard three-speed shift was relocated from the floor to the steering column mid-year. Additionally, the bed lost its structural indents, becoming smooth-sided, and the tailgate chain brackets were now welded to the roll instead of inside it. These changes were kept through 51/52.
1951: For 1951, the grille was restyled with a large horizontal bar, moving the headlights further apart, painted either ivory or argent, with either painted or chrome headlight trim; the hood trim was also redesigned. If specified, a V-8 emblem appeared on the front fascia above the grille opening. The truck underwent several revisions, with the cab receiving a larger rear window and updated door panels; for pickup trucks, the tailgate was redesigned, along with the introduction of a hardwood floor.
