Ford Crown Victoria Police Interceptor
The Ford Crown Victoria Police Interceptor is a four-door body-on-frame sedan that was manufactured by Ford from 1992 to 2011. It is the law enforcement version of the Ford Crown Victoria. From 1997 to 2011, the Ford Crown Victoria Police Interceptor was the most widely used automobile in law enforcement operations in the United States, Canada and Saudi Arabia. They were also used for this purpose on a more limited scale in other countries.
History
After the discontinuation of the Chevrolet Caprice, the Ford Motor Company held a near-monopoly on the market for police cruisers in the United States and Canada for over a decade. The conventional rear-wheel drive, V8 power, and body-on-frame construction were considered advantageous for police use. The body-on-frame construction allowed inexpensive repairs after collisions without the need to straighten the chassis. Rear-wheel drive was deemed better for hard maneuvers and more robust than the front-wheel-drive competition for rough driving over curbs and other obstacles in the urban environment.Although the Ford Crown Victoria Police Interceptor was not sold to the general public, they are widely available via secondhand in North America once they are decommissioned and no longer in service in law enforcement and fleet duty. The cars are in demand by taxi companies, those who want a safe, durable and/or inexpensive car, and those who need a car with a bench seat which can take three passengers in the back. The Crown Victoria Police Interceptor came equipped with many heavy duty parts such as a revised transmission, and a engine. Used Crown Victoria Police Interceptors are normally stripped of any police decals, computer equipment, police radios, and emergency lights before being sold or auctioned to the public.
First generation (1992–1997)
Though the name has been officially in use since 1992, the 1979–1991 full-size LTDs and LTD Crown Victorias used the "P72" production code designation for both fleet and taxi and police models, with the model itself being internally classified as S. From 1992 to 1997, the police car models of the Crown Victoria were officially known as Crown Victoria P71s.In the 1993 model year, the Crown Victoria was given a chrome front grille and a strip between the taillights. Another minor restyle followed suit in 1995, with a new grille and taillights. To accommodate the design of the 1995's new taillights, the rear license plate was moved from the bumper to the trunk's lid.
For 1996, the Crown Victoria badge on the front fenders was removed and the cars received a new steering wheel. 1997 models have a lighter blue interior color vs prior years.
Second generation (1998–2011)
For the 1998 model year, the Ford Motor Company restyled the Crown Victoria, eliminating the "aero" look that the first generation Crown Victoria had from 1992 to 1997; adopting the more conservative styling of the Mercury Grand Marquis. Both cars included restyled front and rear end components. The 1998 police package P71 had a chrome grille, chrome door handle trim, chrome bumper strips, and a chrome-trimmed flat black rear fascia with the "Crown Victoria" badge. At this time, the car was still known as the "Crown Victoria P71".In 1999, Ford introduced the "Crown Victoria Police Interceptor" name, with a badge on the trunk lid replacing the 1998 "Crown Victoria" badge. A chrome-trimmed gloss black rear fascia, black door handle trim, black bumper strips, and a gloss black slatted grille were also introduced at this time. Finally, the new "Street Appearance Package", intended to make the Police Interceptor look like a Standard model, including chrome trimming and badging, was introduced.
Midway through 1999, the taillights were also changed. 1998 and early 1999 models had a separate amber turn signal along the bottom edge of each taillight housing. Starting in mid-1999, the extra bulbs were eliminated and the turn signals returned to the combination of stop/turn setup with red lenses found in many North American cars. Although the lenses changed, the housings did not; they still had the chambers for the separate turn signals that early models had. These chambers were now empty, leaving a perfect place to install in police cars strobe tubes that would not affect brake or turn signal visibility. Non-Police Interceptors and Police Interceptors equipped with the "Street Appearance Package" retained the amber turn signal until 2004.
For 2000, the rear fascia and tail-lights lost the chrome trim, and the gloss black grille was dropped in favor of a flat black slatted grille. Further alterations were made in 2001, including removal of all trim on the plastic bumper pieces and a new honeycomb-style grille, replacing the slat-style grille as is found on previous standard Crown Victorias and CVPIs. Power adjustable pedals also became an option starting in the 2001 model year, as height diversity among officers joining police departments increased. Ford also relocated the rear window defrost switch from the left side of the dash to the direct left of the HVAC controls. The Ford logo on the steering wheel was blue instead of the interior's color.
The year 2003 brought considerable changes. Interior door panels and seats were freshened, with side-impact airbags becoming an option. The 2001–2004 CVPIs all look the same on the exterior; the way for one to tell the 2003–2011 cars apart from the 2001 and 2002 models is by examining the wheels. The frame, steering, suspension, and brakes were all significantly redesigned for the 2003 model year. Because of the new underpinnings, the wheels for the newer cars have a much higher offset. They look almost flat, compared to the concave wheels on the older model years. Along with a new wheel design, new hubcaps were introduced. Lastly, the 2003 model year was the last model in the second generation of CVPIs to feature a cassette player in the stock head unit. However, the 2011 model did include an optional player.
The 2004–2011 Police Interceptor is rated for mostly due to the addition of a new better flowing air intake system. This system includes a new airbox that is similar to the Mercury Marauder airbox, with an integrated mass airflow sensor that is part of the airbox lid. This allows for much more precise flow calibration and reduces the chances of air leakage. The P71 zip tube is also used to reduce NVH as well as transfer air from the airbox to the throttle body with minimal flow resistance. From 2005 on, the throttle body is no longer manually operated via cable but an electronic Drive-By-Wire set up.
2005 models received a new steering wheel and the AM/FM radio antenna was removed from the rear window and moved to the rear quarter panel.
Standard on the 2006 is a redesigned instrument cluster, which now sports an analog speedometer, tachometer, digital odometer with hour meter and trip meter features, and cross-compatibility with the civilian version's various features. Kevlar-lined front doors, which might be useful as protective barriers during gunfights, are optional on the Crown Victoria Police Interceptors for the 2006 Model Year. Also introduced in 2006, for P70/P72 Commercial Heavy Duty models and P71 Police Interceptor models is a 17" steel wheel, replacing the previous 16" wheels, plus new flat gray wheel covers rather than chromed wheel covers as in previous years.
For 2008, the Crown Victoria is restricted to fleet-only sales, and all Panther-platform cars are now flex-fuel cars. The CVPI receives some new options, such as the ability to have keyless entry.
in 2014
For the 2009 model year, the CVPI now has power pedals as standard equipment. Standard equipment across the entire Panther line is side impact airbags and new federally mandated recessed window switches. The CVPI also received upgraded brakes for 2009, although specifics about them are not available. The confirmation flash that occurs when the doors are locked is now automatically disabled when the Courtesy Lamp Disable option is ordered. The confirmation flash was considered to be a safety issue because the lights would flash when officers exited the vehicle and locked the doors, potentially giving their presence away at night. The car gets new styled door moldings and also, Ford placed a "Flex Fuel" badge in the lower right corner of the rear fascia even though they were flex fuel capable since 2008. The Street Appearance Package also gets the same new door moldings as found on the civilian fleet only Crown Victoria LX as well as blacked rear fascia like the normal Police Interceptor & Crown Victoria LX.
In 2010, the VIN code "P71" was replaced with "P7B".
The 2011 model year Ford CVPI received updated larger front headrests to comply with new front crash rating standards.
Comparison with standard Crown Victoria
Both cars use the same 4.6 L 2V SOHC V8, Ford Modular engine, and Ford 4-speed automatic transmission. However, there are few notable differences between the Police Interceptor and standard Crown Victoria or Grand Marquis.Engine and drive train
The Police Interceptor is equipped with an external oil-to-engine-coolant oil cooler to reduce engine oil temperatures, allowing the vehicles to operate at high rpm/high loads for an extended period of time without the risk of engine oil overheating and subsequent engine damage. This engine oil cooler can be prone to seeping oil from the O-ring seals after the high mileage operation encountered by Police Interceptors, particularly where damaged by road salt.The Police Interceptor engine calibration includes a slightly higher idle speed and minor changes in the emissions settings. The computer is tuned for more aggressive transmission shift points, and the transmission itself is built for firmer and harder shifts. The EGR system is controlled differently on 03+ vehicles than on 03+ non-police vehicles.
The 2004–2011 Police Interceptors are equipped standard with an open 3.27:1 rear axle, with a trac loc 3.27:1 rear axle optional, and are electronically limited to due to critical driveline speed limitations. An optional 3.55:1 trac loc rear axle ratio with 119 mph speed limiter was also available. 1999-2001 Police Interceptors equipped with the 3.55:1 rear axle ratio were limited to approximately. This compares to the standard non-P71 2.73 rear axle ratio with a speed limitation of for all "civilian" Crown Victorias.
Ford used an aluminum metal matrix composite driveshaft for the 1999–2001 Police Interceptors as a measure to allow safe operation at with the 3.55:1 gear ratio, but it was more expensive than the regular aluminum driveshafts. Ford CVPIs with the 3.27:1 gear ratio were governed to 129 miles per hour after the 3.55:1 gear ratio was eliminated midway though the 2001 model year. Ford reintroduced a 3.55:1 rear axle ratio for the 2004 model year Police Interceptors with a speed limitation to reduce the risk of driveshaft failure. Ford built two different gear ratios for police use. One had the 3.27 gear ratio and was built for highway use, the second option had the 3:55 gear ratio and was built for city use. All CVPIs came standard with a 3.27.1 ratio open differential, however departments could order a 3.55.1 ratio locking differential for better acceleration off the line. Also noteworthy is that all cars came standard with an open differential unless Ford's Trac-Lok Differential was ordered with the car. Trac-Lok was available with the 3.27.1 ratio and came standard with the 3.55.1 ratio.
Ford CVPI Performance as per data collected by the Michigan State Police
| Model | 1/4 Mile |
| 1992 Ford Crown Victoria Police Interceptor | 17.48 |
| 1993 Ford Crown Victoria Police Interceptor | 17.29 |
| 1994 Ford Crown Victoria Police Interceptor | 17.25 |
| 1995 Ford Crown Victoria Police Interceptor | 17.32 |
| 1996 Ford Crown Victoria Police Interceptor | 16.89 |
| 1997 Ford Crown Victoria Police Interceptor | 17.63 |
| 2003 Ford Police Interceptor | 16.99 |
| 2004 Ford Police Interceptor "3:55" | 16.34 |
| 2004 Ford Police Interceptor "3:27" | 16.44 |
| 2005 Ford Police Interceptor "3:27" | 16.44 |
| 2006 Ford Police Interceptor "3:55" | 16.57 |
| 2006 Ford Police Interceptor "3:27" | 16.73 |
| 2007 Ford Police Interceptor "3:34" | 16.70 |
| 2008 Ford Police Interceptor "3:55" | 16.29 |
| 2008 Ford Police Interceptor "3:27" | 16.35 |
| 2009 Ford Police Interceptor "3:55" | 16.71 |
| 2009 Ford Police Interceptor "3:27" | 16.69 |
| 2010 Ford Police Interceptor "3:55" | 16.42 |
| 2010 Ford Police Interceptor "3:27" | 16.74 |
| 2011 Ford Police Interceptor "3:55" | 16.75 |
| 2011 Ford Police Interceptor "3:27" | 16.82 |
Body and chassis
Another difference is Ford's "severe duty" shock absorbers that offer a stiffer ride than the standard Crown Victoria. They also have black steel wheels with stainless steel or chromed plastic hubcaps.All Police Interceptors also come with T-409 stainless steel dual exhaust systems without resonators. Standard Crown Victorias come with a stainless steel single exhaust system, while the Handling and Performance Package and LX Sport-equipped Crown Victorias have the same exhaust system as the Police Interceptor, with the resonators. The resonators further reduce noise, vibration, and harshness without adding any restriction to the exhaust system. Police Interceptors have higher-rate coil springs, approximately of additional ground clearance, and thinner rear antiroll bars than the Handling and Performance Package Crown Victorias; the base Crown Victoria does not have a rear antiroll bar.
On 2004 and newer models, P71s have a 200 A alternator and a 78 A h battery.
Ford also offers trunk packages for equipment storage, and as of 2005, has added an optional fire suppression system to the Police Interceptor.
The bulk of police car modifications, such as installation of emergency lights, sirens, passenger seat dividers, and plastic rear bench seats, are offered as aftermarket modifications by third parties.
Interior
Police Interceptors came standard with manual cloth bucket seats, despite having the shifter on the steering column. This gap between seats is generally filled by a console holding radios, controls for emergency equipment, large firearms, and often a laptop computer or mobile data terminal. A velour split-bench was optional, with a power adjustable driver's seat being optional on both the split bench and standard bucket seats. The Police Interceptor also has a calibrated speedometer.Identification
One way to distinguish most P71s is the small "Police Interceptor" badge that replaces the standard "Crown Victoria" markings on the trunk lid, although the Street Appearance Package Police Interceptors forego this badge, using the standard Crown Victoria marking. Police Interceptor badges are now available for purchase online, so this identifying technique is not as reliable as it once was. Street Appearance Package cars also use chrome trim rather than the black trim of normal Police Interceptors. P71s can also be identified by the dual exhaust and an analog 140 mph speedometer. The Police Interceptor has an additional interior trunk release in the center of the dashboard with a prominent warning decal right below it, while the civilian version has it only on the driver's door. All 1998 and newer Crown Victorias made for civilian use have a five-digit horizontal keypad above the driver side door handle which can be used to lock/unlock the car and open its trunk. All P70, 71, and 72 Crown Victorias are assembled without this keyless entry system, so unless the driver door was damaged and had an improper replacement door installed any Crown Victoria with a keypad is a civilian one, while any one without a keypad is a P70, 71, or 72 fleet Crown Victoria. The only completely infallible way to identify a Police Interceptor is to look for the code "P71" in the VIN, or "P7B", as it was renamed in 2010.Police Interceptors will have the characters "P71" as the model code in the VIN, or "P7B" for 2010+ models, instead of P70, P72, P73, P74, or P75.
Only Police Interceptors were available with black front grilles from the factory.
Problems and criticism
Following the criticism of fires following highway-speed rear-end collisions, 2005 and later model Police Interceptors now come with an optional automatic fire suppression system and special "trunk packs" designed to prevent cargo from penetrating the fuel tank in a collision. The customer must pay an additional $150 per car for the trunk packs. For a more detailed discussion of the fuel tank leakage concerns that prompted these changes, see Ford Crown Victoria.There were also some problems with early 2003 Police Interceptors. The newly designed steel wheels would rust prematurely, and the rack and pinion steering units would fail early. This was not limited to the Police Interceptor; some 2004 Mercury Marauders were also affected. A recall, initiated on March 1, 2007 affects the steel wheels used on 2003–05 Police Interceptors.
Another issue with the wheels have been weld points that come loose, causing rapid air loss in tires and the potential for loss of control. A recall was issued after an investigation by the National Highway Traffic Safety Administration. However, the company has created anger among civilian owners of 2003+ Police Interceptors by refusing to honor the recall unless the vehicle is still being used in fleet service. The only way this problem could be addressed is if the civilian customer complains to a dealership about air leakage problems, an inability to balance the wheels properly, or a "nibble" or excessive vibration in the steering at speed. The issue is then addressed through the "Customer Satisfaction Program" that Ford has initiated for the same wheels. Ford ultimately resolved this issue on production cars in 2006 by introducing new 17″ steel wheels for their heavy duty models. These wheels may be of interest to those who have 2003–2005 Police Interceptors, 2003–2005 P70/P72 Commercial Heavy Duty models or 2003–2008 Standard models with 16″ steel wheels and are concerned about the safety of these wheels.
The steel body-on-frame Crown Victoria Police Interceptor fares better in crashes than current unibody counterparts such as the Chevrolet Impala and Dodge Charger
Discontinuation
On March 12, 2010, Ford Motor Company unveiled the 2013 Police Interceptor Sedan. While sharing a nameplate with the Crown Victoria Police Interceptor, the Police Interceptor Sedan was a variant of the sixth-generation Ford Taurus, shifting from the long-running Panther chassis to an all-wheel drive version of the D3 architecture.In April 2011, Ford stopped accepting orders for the Crown Victoria Police Interceptor. Following the 2011 model year, due to its lack of stability control, the Crown Victoria was no longer legal for sale in the United States and Canada; a short 2012 model year was produced solely for GCC/Middle East export. On September 15, 2011, the final Crown Victoria rolled off the assembly line at 12:30 PM as the final vehicle assembled by St. Thomas Assembly in Ontario.
In a design decision, the Police Interceptor Sedan did not adopt the Taurus nameplate, as it was sold alongside the Police Interceptor Utility ; neither has been sold for retail sale. Along with heavier-duty components and a redesigned interior, the Police Interceptor Sedan adopted higher-performance suspension tuning. The standard engine was a 3.7L V6 and an optional 3.5L twin-turbocharged V6.
Use outside North America
In Russia, the Main Directorate for Road Traffic Safety, popularly known under its historical abbreviation GAI purchased 140 Crown Victoria P71s from 1994 to 1995. Part of the militsiya, the vehicles were operated by the Road Patrol Service as highway patrol units around the greater Moscow area. The most powerful vehicles purchased by the DPS at the time, the Crown Victorias were used by the agency through the early 2010s.In 2003, three Crown Victoria Police Interceptors were bought by the French city of Montpellier. Purchased as part of an upgrade of the local Police Municipale, the Crown Victorias were selected for their durability, security, and safety. In 2008, they were put up for sale, as the American-designed police cars were found to be too wide for the city streets and too long for police department garages.
In popular culture
As the Crown Victoria became increasingly ubiquitous within North America as a police vehicle, media from the 1990s through the 2010s followed suit and as a result the Crown Victoria & fictional vehicles resembling it became a common set-piece in television, cinema, and video games with a North American focus. This was especially true after the discontinuation of the Chevrolet Caprice 9C1. Even years after its discontinuation, the Crown Victoria continues to hold a reputation as a tool of authority within North America.In Russia, the mid-1990s Crown Victoria became a symbol of Moscow's road militsiya for over a decade; the P71 is pictured on a DPS badge awarded for 15 years of service. The cars were featured in several movies and in a 1997-1998 TV show Perehvat, where they tried to intercept target automobiles on Moscow streets.