Enstrom 480


The Enstrom 480 is a small, light helicopter produced by the Enstrom Helicopter Corporation.

Design and development

In the 1980s the Enstrom Helicopter Company was producing two helicopters, both powered by horizontally-opposed piston engines. When the United States Army revealed a requirement for a turbine-powered training helicopter, the company designed a larger, turbine-powered version of its 280 Shark. The proposed unit was designated TH28.
The Army contract effort was not successful, but the company effort looked promising enough that management committed to continue with a commercial version, which was introduced in 1993. Its power was provided by the C20W variant of the Rolls-Royce Model 250 turboshaft engine.

Design

The 480 fuselage consists of a welded steel-tube framework with aluminum cover and tailcone. The pilot controls the aircraft from the left seat, which is unusual for helicopters. The aircraft does not have a hydraulic system; a trim system absorbs rotor feedback and allows the pilot to position the desired stick setting.
The 480B engine is capable of producing 420 shp, but in this application it is derated to 305 shp for 5 minutes and 277 continuous shp, which is available to 13,000 MSL on a standard day. Thus hot-temperature or high-altitude operations have a considerable degree of power available. The engine drives a three-bladed rotor of 32 feet diameter and a tail rotor of 5 feet diameter. The main rotor and hubs weigh a total of 300 pounds, so there is considerable inertia in the system during a loss of power. Autorotation landings are uneventful.

Variants

;480
;480B
;480B Guardian
;TH-28

Operators

Civil operators

The aircraft us operated by a large number of small commercial and flight training operators, most operating one or two aircraft.

Military and government operators

;