DANDE is a 50 kg class spacecraft developed by the University of Colorado Boulder was the winner of the 5th iteration of the Air Force Research Laboratory'sUniversity Nanosat Program. Due to a failure in a spacecraft system, the ground team was unable to actively command the satellite and spacecraft became just a passive object in Earth orbit by which some passive drag characteristics might be deduced.
Status
DANDE launched on September 29, 2013 and correctly separated from the launch vehicle. After a month of assessing spacecraft health, successful separation of the Lightband Adaptor Bracket was conducted on October 30 over the Starfire Optical Range in Maui. The next step was planned to be spin-up and alignment. However, a failure in a spacecraft system prevented that. The DANDE team reported on January 9, 2014 that they had "been unable to actively command DANDE collecting passive drag data through analysis of the TLE's."
Origin
DANDE was elected as an entry to the University Nanosat Program competition, a two-year program that is now in its seventh iteration. In 2009, DANDE won additional money and a future flight to orbit, propelling the project into an independent and master's research project. DANDE is the first CU student-built satellite launch opportunity in five years. To date, about 100 students have been involved in DANDE through construction, testing, and operations. The density of the atmosphere varies greatly due to space weather and other unknown processes. The International Space Station once dropped in height by tens of kilometers in a span of a few days and by understanding drag forces and composition of the atmosphere we can provide better data about this phenomenon.
Science
Drag induced by the neutral-atmosphere density is the major perturbation on satellites in low earth orbit. True density deviates as much as 21% from model predictions, introducing error into crucial government and private space operations with applications to situational awareness, space surveillance, laser communications, re-entry prediction, rendezvous and proximity ops. A need exists to measure physical or 'true' density, quantify density variations, and to provide in-situ model calibration data. The operating principle is to solve the full drag equation: Each variable is isolated either by an a priori knowledge or via in-situ measurement. The mass and area are based on the physical parameters that can be measured prior to launch. The Coefficient of Drag is simulated using the external geometry of the spacecraft in its science collection state. Density, Acceleration, and a Wind Vector are sensed by two onboard instruments, the first is a high precision Accelerometer suite that amplifies the μg drag signal in the along track axis of the spacecraft. Secondary to that is a Neutral Mass Spectrometer that can provide data products relating the wind vector with respect to the spacecraft ram-vector as well as the numerical density of the constituents in the atmosphere. The idea is that at orbital velocities the spacecraft traveling through even a stagnant atmosphere will have collisions with the species present at energies of several Electron-Volts of which there are still billions per cubic meter. DANDE is spherical in nature so the projected cross-sectional area is held nearly constant. This leverages a simplified attitude subsystem design as opposed to a full three-axis stabilized system. Further spinning about orbit normal allows the accelerometer instrument, located so the spin-axis is perpendicular to the acceleration sense axis, to accept in a modulated acceleration profile. There were issues that make having GPS on board the spacecraft prohibitive. As a student program the cost of an unlock GPS receiver that could provide data products in orbital scenarios was a chief concern, but the spacecraft attitude state would not be conducive to consistently providing a lock at all times when geolocating data. High Task Tracking is a possibility through Air Force Space Command Research and Analysis group, but that agreement does not solve all the needs at the beginning of the mission when the desire is to make contact and begin commissioning.
