Douglas T. Ross


Douglas Taylor "Doug" Ross was an American computer scientist pioneer, and Chairman of SofTech, Inc. He is most famous for originating the term CAD for computer-aided design, and is considered to be the father of Automatically Programmed Tools a language to drive numerically controlled manufacturing. His later work focused on a pseudophilosophy he developed and named Plex.

Biography

Ross was born in China, where his parents both worked as medical missionaries, and he then grew up in the United States in Canandaigua, N.Y. He received a Bachelor of Science cum laude in mathematics from Oberlin College in 1951, and a Master of Science in electrical engineering from the Massachusetts Institute of Technology in 1954. Afterwards he started but didn't complete his PhD at MIT due to his pressing work as Head of the MIT's Computer Applications Group.
In the 1950s, he participated in the MIT Whirlwind project. In 1969, Ross founded SofTech, Inc., which started as an early supplier of Pascal compilers. Ross lectured at MIT Electrical Engineering and Computer Science Department and was chairman emeritus. He retired at Softech, having served as the company's president from 1969 to 1975, when he became Chairman of the Board of directors.
Among his many honors are the Joseph Marie Jacquard Memorial Award from the Numerical Control Society, in 1975, and the Distinguished Contributions Award from the Society of Manufacturing Engineers in 1980, and Honorary Engineer of the Year Award from the San Fernando Valley Engineer's Council, 1981. The MIT Department of Electrical Engineering and Computer Science named after him the Douglas T. Ross Career Development Associate Professor of Software Development. The D.T.Ross Medal Award of the Berliner Kreis Scientific Forum for Product Development of the WiGeP Academic Society of Product Development Berliner Kreis & WGMK was named in his honor.

Work

Ross contributed to the MIT Whirlwind project, which was the first to display real-time text and graphics. Many consider him to be the father of APT—Automatically Programmed Tools—the language that drives numerically-controlled manufacturing. Also he originated the term CAD for computer-aided design.

MIT Whirlwind project

Ross came to MIT in the fall of 1951 as a Teaching Assistant in the Mathematics Department. His wife, Pat, was a "computer banging away on a Marchant calculator" at Lincoln Laboratory before it officially took over the Whirlwind computer. Her group used the Servomechanisms Labs analog correlation computer, built by Norbert Wiener. It had ball-and-disk integrators and arms used to hand trace strip chart curves of radar noise data. When the machine was in use, variables in equations were represented by rotations in its shafts. These were connected with mechanical pens which plot an accurate curve worked out by the shafts continuous movement. Interpreted correctly, this curve gave a graphic solution to the problem. This initiated Ross's entry to the Servo Lab with a summer job in June 1952 in the field of airborne fire control system evaluation and power density spectra analyses.
The first programming language Ross designed was one in which the "computer" was a collection of people, six or eight part-time students. It was suggested that Ross could use Whirlwind in his work. Whirlwind at that time had exactly one "k" of sixteen bit memory. He taught himself to program it in the summer of 1952. His masters thesis related to Computational Techniques for Fourier Transformation.

Automatically Programmed Tool

He worked on numerous projects around the Whirlwind secret room of the Cape Cod System SAGE air defense system and at the Eglin Air Force Base ERA 1103. Around 1954 Ross wrote the first hand-drawn graphics input program to a computer. He stated it was "One of the few programs that I ever wrote that worked the first time" The Air Force was interested in continuing beyond MIT's Numerical Control Projects objective of standardizing the control of machine tools.
Beginning in 1956 MIT had a contract for a new program in numerical control, this time emphasizing automatic programming for three-dimensional parts to be produced by 3- and 5-axis machine tools. Ross stated his work with radar vector handling led naturally to his defining tool paths as space curves rather than points in APT II. And allowed him to conceptualize their realization in a machine tools rectilinear framework. The Servo Lab received Air Force sponsorship for numerical control hardware, software, and adaptive control, followed by computer-aided design, computer graphics hardware and software, and software engineering and software technology, from 1951. This continued for almost 20 years. In 1957 the last of Ross's original three research assistants, Sam Matsa, left for IBM to develop AUTOPROMT, a three-dimensional APT derivative and later co-found, with Andy Van Dam the ACM SICGRAPH.
The APT project largely finished in February 1959, and was turned over to the public domain. The legacy of this work can be found in programs of the 21st century.

Computer-aided design

At the conclusion of APT I, Ross and John Francis Reintjes were interviewed for MIT science reporter television by Robert S. Woodbury. There was considerable public interest in the increasing sophistication of numerically controlled machine tools. The interview is illustrative of Ross's long stated belief in the graphics potential of the computer. He showed the audience a photograph of a vector sweep image from a display scope in the form of a Disney cartoon character coupled in a coordinate space with a canonical gnomon.
The next few years would see the completing of APT's influential Arithmetic Elements and then the broad collaboration pioneered in the APT project was repeated in building the computer-aided design system AED.
Early industry practitioners of computer aided drafting and manufacturing visited MIT in formal exchanges of the developing technologies. Ross organized many standards making conferences, solidifying his place as a touchstone in any future discussion of CAD. The next decade brought a refining of his philosophy of systems design. He was a founding member of SIAM

MIT's Electrical Engineering and Computer Science

He was an early active IFIPS participant. In 1968 Ross taught what he suggested was the world's first software engineering course at MIT. He participated in the foundational . A large number of MIT project users built their systems under . Post Assembly revisions of Jay Wright Forrester's famous Dynamo feedback-modeling, System Dynamics simulation language were written in AED-0, Ross's extended version of Algol 60 and used into the 1980s.

Structured Analysis and Design Technique

As the inventor of SADT, Structured Analysis and Design Technique, Ross was an early developer of structured analysis methods. During the 1970s, along with other contributors from SofTech, Inc., Ross helped develop SADT into the IDEF0 method for the Air Force's Integrated Computer-Aided Manufacturing program's IDEF suite of analysis and design methods.
He was a member of the IEEE IDEF0 Working Group which produced the IEEE IDEF0 standard in 1998. The IEEE IDEF0 standard superseded FIPS PUB 183, which was retired in 2002.

Plex

Ross' Structured Analysis grew out of his "philosophy of problem-solving", which he named Plex in the late 1950s. Later in Ross's life, this became something of an obsession. In the 1980s, he minimized his role at SofTech to concentrate on developing Plex into a wide-ranging pseudophilosophy touching on epistemology, ontology, and philosophy of science. Ross wrote a wealth of material on Plex, delivering lectures at conferences and holding an abortive seminar at MIT in 1984. However, he was unable to find the audience he believed Plex deserved, and by the late 1980s he considered it an "intolerable burden of responsibility" to be its sole proponent and prophet.

Publications

Doug Ross has written dozens of articles and some reports. A selection: