Dental floss
Dental floss is a cord of thin filaments used to remove food and dental plaque from between teeth in areas a toothbrush is unable to reach.
The use of floss is commonly recommended in order to prevent gingivitis and the build-up of plaque. Namely, the American Dental Association claims that up to 80% of plaque can be eliminated with this method, and flossing may confer a particular benefit in individuals with orthodontic devices. However, empirical scientific evidence demonstrating the clinical benefit of flossing as an adjunct to routine toothbrushing alone remains limited.
History
Levi Spear Parmly, a dentist from New Orleans, is credited with inventing the first form of dental floss. In 1819, he recommended running a waxen silk thread "through the interstices of the teeth, between their necks and the arches of the gum, to dislodge that irritating matter which no brush can remove and which is the real source of disease." He considered this the most important part of oral care. Floss was not commercially available until 1882, when the Codman and Shurtleft company started producing unwaxed silk floss. In 1898, the Johnson & Johnson Corporation received the first patent for dental floss that was made from the same silk material used by doctors for silk stitches.One of the earliest depictions of the use of dental floss in literary fiction is found in James Joyce's famous novel Ulysses, but the adoption of floss was low before World War II. During the war, nylon floss was developed by physician Charles C. Bass. Nylon floss was found to be better than silk because of its greater abrasion resistance and because it could be produced in great lengths and at various sizes.
Floss became part of American and Canadian daily personal care routines in the 1970s.
Use
Dental professionals recommend that a person floss once per day before or after brushing to reach the areas that the brush will not and allow the fluoride from the toothpaste to reach between the teeth. Floss is commonly supplied in plastic dispensers that contain 10 to 100 meters of floss. After pulling out approximately 40 cm of floss, the user pulls it against a blade in the dispenser to cut it off. The user then strings the piece of floss on a fork-like instrument or holds it between their fingers using both hands with about 1–2 cm of floss exposed. The user guides the floss between each pair of teeth and gently curves it against the side of the tooth in a 'C' shape and guides it under the gumline. This removes particles of food stuck between teeth and dental plaque that adhere to dental surfaces below the gumline.Types
A variety of dental flosses are commonly available. Floss is available in many forms including waxed, unwaxed monofilaments and multifilaments. Dental floss that is made of monofilaments coated in wax slides easily between teeth, does not fray and is generally higher in cost than its uncoated counterparts. The most important difference between available dental flosses is thickness. Waxed and unwaxed floss are available in varying widths. Studies have shown that there is no difference in the effectiveness of waxed and unwaxed dental floss, but some waxed types of dental floss are said to contain antibacterial agents and/or sodium fluoride. Factors to consider in choosing a floss include the amount of space between teeth and user preference. Dental tape is a type of floss product which is wider and flatter than conventional floss. Dental tape is recommended for people with larger tooth surface area.The ability of different types of dental floss to remove dental plaque does not vary significantly; the least expensive floss has essentially the same impact on oral hygiene as the most expensive.
Factors to be considered when choosing the right floss or whether the use of floss as an interdental cleaning device is appropriate may be based on:
- The tightness of the contact area: determines the width of floss
- The contour of the gingival tissue
- The roughness of the interproximal surface
- The client's manual dexterity and preference: to determine if a supplemental device is required
Dental floss is the most frequently recommended cleaning aid for teeth sides with a normal gingiva contour in which the spaces between teeth are tight and small. The dental term ‘embrasure space’ describes the size of the triangular-shaped space immediately under the contact point of two teeth. The size of the embrasure space is useful in selecting the most appropriate interdental cleaning aid. There are three interproximal embrasure types or classes as described below:
- Type I – the gums fills embrasure space completely
- Type II – the gums partially fills embrasure space
- Type III – the gums do not fill embrasure space
| Interdental Nonpowered Self-Care Products | Description | Indications | Contraindications and limitations | Common problems experienced during misuse of product | The number of times it can be used/duration of use |
| Waxed floss | Traditional string floss, Nylon waxed Monofilament floss also available coated in polytetrafluoroethylene, Does not fray | Type I embrasures, Floss cleans between the gum and tooth | Type II and III embrasures | Floss cuts, Floss clefts, Circulation to fingers may cut off from wrapping floss too tight, Inability to reach back teeth due to manual dexterity problems | One time use. Dispose after use |
| Unwaxed floss | Traditional string floss, Unwaxed, multifilaments | Type I embrasures, Floss cleans between the gum and tooth | Type II and III embrasures | See waxed floss | One time use. Dispose after use |
| Dental tape | Waxed floss that has a wider and flatter design to conventional floss | Type I embrasures, Floss cleans between the gum and tooth that may have large tooth surface area | Type II and III embrasures | See waxed floss | One time use. Dispose after use |
| Tufted/braided dental floss/ Superfloss | Regular diameter floss, wider tufted portion looks like yarn. Tip of product also resembles a threader | Type II and III embrasures. Under pontics of fixed partial dentures | Type I embrasures | Trauma from forcing threader into tissues. Yarnlike portion/fibers may catch on appliances or dental work | One time use. Dispose after use |
| Floss holder | Handle with two prongs in Y or F Shape | Type I embrasures. Recommended for individuals that lack manual dexterity, who are physically challenged, or who have a strong gag reflex. Floss holders may assist caregivers | Type II and III embrasures | Unable to maintain tension of floss against tooth and fully wrap around tooth side. Need to set a fulcrum/finger rest to avoid trauma to gums and floss cuts | Can be used a number of times, however floss is to be changed after each use |
| Floss threader | A nylon loop designed to resemble a needle with large opening to thread floss. Tip of floss threader inserted and pulled through the space between two teeth to allow cleaning of the teeth sides | Type I embrasures: tight contacts between teeth, floss between and under abutment teeth and pontics of fixed prosthesis, under orthodontic appliances such as wires and lingual bar, under bars for implants | Type II and III embrasures | Trauma to gums from flossing threader into tissues | Can be used a number of times, however floss is to be changed after each use |
| Threader-tip floss | A length of floss with an attached threader tip. | Type I embrasures, Floss cleans between the gum and tooth | Type II and III embrasures | See waxed floss | One time use. Dispose after use |
The table below describes the different types of Interdental powered self-care products available.
| Interdental Powered Self-Care Products | Description | Indications | Contraindications and limitations | Common problems experienced during misuse of product |
| Power flossers | Bow type tip and Single filament nylon tip | Type I embrasures: Individuals with physical challenges. Individuals that cannot master traditional string floss. Individual preference. | Type II and III embrasures. Tight contacts between teeth or crowded teeth | Floss cuts or clefts with floss holder designs. Unable to maintain tension or wrap floss completely around tooth side. |
Efficacy
Evidence
The American Dental Association has stated that flossing in combination with tooth brushing can help prevent gum disease and halitosis.However, evidence favoring commonplace use of floss remains limited. A 2008 systematic review concluded that adjunct flossing was no more effective than tooth brushing alone in reducing plaque or gingivitis. The authors concluded that routine instruction of flossing in gingivitis patients as helpful adjunct therapy is not supported by scientific evidence, and that flossing recommendations should be made by dental professionals on an individual basis.
A 2011 Cochrane Database systematic review identified "some evidence from 12 studies that flossing in addition to tooth brushing reduces gingivitis compared to tooth brushing alone", and "weak, very unreliable evidence from 10 studies that flossing plus tooth brushing may be associated with a small reduction in plaque at 1 and 3 months."
More recently, a 2019 Cochrane Database systematic review compared toothbrushing alone to interdental cleaning devices, and also compared flossing to other interdental cleaning methods. In all, 35 Randomized Control Trials met the criteria for inclusion, with all but 2 studies at high risk for performance bias. The authors concluded that “overall, the evidence was low to very low certainty, and the effect sizes observed may not be clinically important.”
As many authors note, the efficacy of flossing may be highly variable based on individual preference, technique, and motivation. Moreover, flossing may be a relatively more difficult and tedious method of interdental cleaning compared to an interdental brush.
In response to an Associated Press investigation, the US government stopped recommending flossing in their 2015 U.S. dietary guidelines, noting that the effects of flossing had never been researched as required.
Floss for orthodontic appliances
Orthodontic appliances, such as brackets, wires, and bands, can harbor plaque with more virulent changes in bacterial composition, which can ultimately cause a reduction in periodontal health as indicated by increased gingival recession, bleeding on probing, and plaque retention measurements. Furthermore, fixed appliances makes plaque control more challenging and restricts the natural cleaning action of the tongue, lips, and cheek to remove food and bacterial debris from tooth surfaces, and also creates new plaque stagnation areas that stimulate the colonisation of pathogenic bacteria.Patients undergoing orthodontic treatment may be recommended to maintain a high level of plaque control through not only conscientious toothbrushing, but also proximal surface cleaning via interdental aids, with dental floss being the most recommended by dental professionals. Notably, small-scale clinical studies have demonstrated that dental floss, when used correctly, may lead to clinically significant improvements in proximal gingival health.
Floss threader
A floss threader is loop of fiber that is shaped in order to produce better handling characteristics. It is used to thread floss into small, hard to reach sites around teeth. Threaders are sometimes required to floss with dental braces, fix retainers, and bridge.Floss pick
A floss pick is a disposable oral hygiene device generally made of plastic and dental floss. The instrument is composed of two prongs extending from a thin plastic body of high-impact polystyrene material. A single piece of floss runs between the two prongs. The body of the floss pick generally tapers at its end in the shape of a toothpick.There are two types of angled floss picks in the oral care industry, the 'Y'-shaped angle and the 'F'-shaped angle floss pick. At the base of the arch where the 'Y' begins to branch there is a handle for gripping and maneuvering before it tapers off into a pick.
Floss picks are manufactured in a variety of shapes, colors and sizes for adults and children. The floss can be coated in fluoride, flavor or wax.
History of floss pick
In 1888, B.T. Mason wrapped a fibrous material around a toothpick and dubbed it the 'combination tooth pick.' In 1916, J.P. De L'eau invented a dental floss holder between two vertical poles. In 1935, F.H. Doner invented what today's consumer knows as the 'Y'-shaped angled dental appliance. In 1963, James B. Kirby invented a tooth-cleaning device that resembles an archaic version of today's F-shaped floss pick.In 1972, an inventor named Richard L. Wells found a way to attach floss to a single pick end. In the same year, another inventor named Harry Selig Katz came up with a method of making a disposable dental floss tooth pick.