The dehydrogenative coupling of silanes is a reaction type for the formation of Si-Si bonds. Although never commercialized, the reaction has been demonstrated for the synthesis of certain disilanes as well as polysilanes. These reactions generally require catalysts.
Metallocene-based catalysts
and related their complexes are typical catalysts. A typical reaction involves phenylsilane: Para- and meta-substituted phenylsilanes polymerize readily but ortho-substituted polymers were failed to form. Polymers white/colorless, tacky and soluble in organic solvents. Crosslinking was not observed. Using Cp2Ti2 as a catalyst, the dehydrogenative coupling of phenylsilane in the presence of vinyltriethoxysilane produces a polysilane terminated with a triethoxysilylvinyl group.
Other catalysts
Nickel-based catalysts
The nickel complex 2 promotes the dehydrogenative coupling of some silanes. File:Nickel catalyzed Phenyl Polymerization mechanism.png|thumbnail|center|550px|Possible Polymerization of phenylsilane using 2 Catalyst
Dehydrogenative coupling of primary silane using Wilkinson's catalyst is slow and dependent on the removal of H2 product. This conversion proceeds by oxidative addition of the Si-H bond and elimination of dihydrogen.
Borane catalysts
) is another catalyst for the dehydrogenative coupling of tertiary silanes. This system has the useful characteristic of being selective for Si-H bonds vs Si-Si bonds, leading to fewer branches and more linear polymers. This catalyst is particularly useful in reactions involving thiols and tertiary silanes or disilanes.
Related reactions of hydrosilanes
Dehydrodimerization of tertiary silanes
Due to steric factors, dehydrogenative coupling of tertiary silanes is slow. Disilane formation has been demonstrated in the presence of CpFe2CH3 combined with UV-irradiation. The mechanism is proposed to involve dissociation of CO ligand, oxidative addition of the Si-H center, followed by reductive elimination of methane. From there, the disilane R3Si-SiR3 is reductively eliminated from the complex. In addition, this same iron catalyst can be used to build polymers with a Si-R-Si backbone. When R = phenylene, NH, or Fe, this reaction works particularly well, and yields of over 95% are obtained.
Cross-coupling
As well as being coupled to each other, tertiary silanes can be coupled with carboxylic acids to form silyl esters. Ru312/EtI is a good catalyst for this. This reaction applies to a wide range of silanes and acids. The complex can also be used to produce silyl esters. Tertiary silanes may also be dehydrogenatively coupled to aromatic rings with the use of the catalyst TpMe2Pt2H. For example, this platinum catalyst can be used to react triethyl silane with benzene to produce phenyltriethylsilane, with the elimination of hydrogen gas. This is a terrific catalyst because it eliminates the need for a hydrogen acceptor, something which is normally required for the silation of a C-H bond. This reaction may also be done intramolecularly to produce five- or six-membered silicon-containing rings fused to a phenyl ring. In addition, tributylsilane can be converted into the corresponding cyclic organosilane via the same process. A drawback to this catalyst, however, is that it requires rather harsh reaction conditions. It is also not particularly regioselective, so starting materials containing substituted benzene would result in a mixture of products.
Polymerization of silane
Some methods used to produce polysilanes are polymerization of masked dislenes, electroreduction of dichlorosilanes,
Polymer characterization
1H and 29Si NMR spectroscopy can sometimes be used to help identify and characterize products from these reactions. Infrared spectroscopy may also be useful as it can indicate whether or not the product is a tertiary silane. The stretch for Si-H is seen at around 2100 and 910 cm−1. In the case of tertiary silanes however, the peak at 910 cm−1 is not seen. The shift or change in these peaks will be affected by the size of the polymer.
