Dakotaraptor
Dakotaraptor is a potentially chimaeric genus of large dromaeosaurid theropod dinosaur that lived in North America during the Late Cretaceous period. The remains have been found in the Maastrichtian stage of the Hell Creek Formation, dated to the very end of the Mesozoic era, making Dakotaraptor one of the last surviving dromaeosaurids. The remains of D. steini were discovered in a multi-species bonebed. Elements of the holotype and referred specimens were later found to belong to trionychid turtles, and further analysis of potential non-dromaeosaurid affinities of the holotype and referred material have not yet been conducted. Phylogenetic analyses of D. steini place it in a variety of positions in the Dromaeosauridae.
Discovery and naming
In 2005, paleontologist Robert DePalma in Harding County, South Dakota discovered a fluvial bonebed bearing the remains of a variety of dinosaurian and non-dinosaurian remains, which yielded a partial skeleton attributed by DePalma to a large dromaeosaurid. Subsequently, the same site produced additional dromaeosaurid remains.In 2015, the type species Dakotaraptor steini was named and described by Robert A. DePalma, David A. Burnham, Larry Dean Martin, Peter Lars Larson and Robert Thomas Bakker. The generic name, Dakotaraptor, combines a reference to South Dakota and the Dakota people with the Latin word raptor, meaning "plunderer". The specific name, steini, honours paleontologist Walter W. Stein. Dakotaraptor was one of eighteen dinosaur taxa from 2015 to be described in open access or free-to-read journals.
compared with other theropod dinosaurs. Said furcula was later shown to be an element from a trionychid turtle.
The holotype, PBMNH.P.10.113.T, was found in a sandstone layer of the upper Hell Creek Formation, dating from the late Maastrichtian. It consists of a partial skeleton, lacking the skull, of an adult individual. It contains a piece of a back vertebra, ten tail vertebrae, both humeri, both ulnae, both radii, the first and second right metacarpals, three claws of the left hand, a right thighbone, both shinbones, a left astragalus bone, a left calcaneum, the left second, third and fourth metatarsal, the right fourth metatarsal, and the second and third claw of the right foot. An assigned furcula was later excluded from the specimen. Apart from the remains of the holotype, in the site bones were discovered that also belonged to Dakotaraptor but which represented a more gracile morph. These included the specimens PBMNH.P.10.115.T: a right shinbone; PBMNH.P.10.118.T: a connected left astragalus and calcaneum; and KUVP 152429: originally identified as a furcula, but now also excluded from the known remains of Dakotaraptor. Additionally four isolated teeth were referred, specimens PBMNH.P.10.119.T, PBMNH.P.10.121.T, PBMNH.P.10.122.T, and PBMNH.P.10.124.T. These fossils are part of the collection of The Palm Beach Museum of Natural History. Other referred fossils are KUVP 156045, an isolated tooth, and NCSM 13170, a third supposed furcula later identified as not belonging to Dakotaraptor.
Description
Size
Dakotaraptor is exceptionally large for a dromaeosaurid; it has an estimated adult length of. In 2016 other estimations suggested a length of 4.35-6 m in length and 220-350 kg in weight.This approaches the size of the largest known dromaeosaurid, Utahraptor. Dakotaraptor however, does not have the proportions and adaptations of Utahraptor, but more closely resembles smaller dromaeosaurids like Deinonychus.
Distinguishing traits
Apart from the large size, the description of 2015 indicated some additional distinguishing traits. On the fourth foot claw, the boss that serves as an attachment for the tendon of the flexor muscle is reduced in size. The "blood groove" on the outer side of the fourth claw of the foot, towards the tip is fully enclosed over half of its length, forming a bony tubular structure. The second and third claws of the foot have sharp keels at their undersides. The second foot claw, the "sickle claw", equals 29% of the thighbone length. On the shinbone, the crista fibularis, the crest that contacts the calfbone, is long and lightly built with a height that does not exceed 9% of the crest length. The upper edge of this crest ends in a hook. On the second metacarpal, of the two condyles that contact the finger, the inner one is almost as large as the outer one. The outer side of the second metacarpal has but a shallow groove for the ligament that connects it to the third metacarpal. When the arm is seen in a flat position, of the second metacarpal the edge between the wrist joint and the upper shaft is straight in top view. The teeth have fifteen to twenty denticles per on the rear edges and twenty to twenty-seven denticles on the front edges.Skeleton
Vertebral column
The vertebrae of the back are highly pneumatised, filled with trabecular bone that shows many air spaces. On the middle tail vertebrae the front joint processes, the prezygapophyses, are extremely elongated with an estimated intact length of, spanning about ten vertebrae. This stiffens the tail.Forelimb
Like virtually all other theropods, Dakotaraptor likely possessed a furcula, or “wishbone”, as part of the shoulder girdle. Theropod wishbones are quite varied and often different from the strongly U-shaped furculae most modern birds possess; the elements originally identified as the furcula of Dakotaraptor were U- to V-shaped, similar to many other dromaeosaurids such as Velociraptor, and even the large spinosaurid theropod Suchomimus. In 2015, a study by Victoria Megan Arbour et al. proposed that the presumed Dakotaraptor furculae in fact represented a part of a turtle armour, the entoplastron of Axestemys splendida, a member of the Trionychidae. In 2016, DePalma et al. recognized that none of the referred furculae actually belonged to Dakotaraptor, and excluded them from its hypodigm.The wing of Dakotaraptor was given much attention in the describing article. Here, “wing” is used as an anatomical descriptive term not related to its functionality, since Dakotaraptor was flightless. This is similar to the term “wing” for the same appendages in ostriches, emus, and other flightless birds. It is meant to express that arm is equipped with long feathers. Many of the wing bones were discovered, so the wing is very complete. The humerus, the upper arm bone, is relatively long and slender. It is somewhat bent to the inside. The most notable anatomical feature is the row of very prominent bumps along a ridge on the lower edge of the ulna, one of the forearm bones. These are called ulnar papillae, or quill knobs. In birds and some other theropod dinosaurs, these bumps were spots for reinforced attachment of the remiges, or wing feathers. When quill knobs are present, this is considered a strong indication that the animal had long remiges on the wings. Since quill knobs are rare in the fossil record, paleontologists mainly relied on phylogenetic bracketing to determine if a species was likely to have had wing feathers - if a relative on a "higher" branch of the evolutionary tree had the feathers, and one on a "lower" branch down had them also, then a species in the middle position likely did as well. Dakotaraptor’s quill knobs show that the animal unequivocally had prominent wing feathers, making it the largest dromaeosaurid with confirmed plumage of that type. The quill knobs of Dakotaraptor have a diameter of about, which shows that these feathers were rather large. It was estimated that a complete series might include fifteen of these papillae ulnares. The ulna is long and the other lower arm bone, the radius, measures. The hand bones show that their joints allowed for little mobility. The wingspan of Dakotaraptor was estimated at, not taking into account possible primary remiges longer than the hand.
The second metacarpal of the metacarpus of the hand, the bone that primary remiges attach to, also had a flat bony shelf as its dorsal surface. The shelf made a perfect spot for the primary feathers to lay across in their life-attachment.
Hindlimb
Overall, the hindlimb is built lightly and with long elements, contrary to the robust, stocky hind limbs of Utahraptor. Dakotaraptor more closely resembles the agile, springy smaller dromaeosaurids and would have been well-suited at running and pursuit predation. The length of the thighbone is. It is relatively shorter and more lightly built than that of Utahraptor. To the contrary the shinbone is rather elongated. The holotype shinbone is, with a length of, the longest dromaeosaurid tibia known. It is 22% longer than the thighbone, indicating a good running capability. The shinbone's cnemial crest has a sharp corner pointing to the front. Its fibular crest ends in a hook-shaped process pointing to above, a condition that is unique in the entire Theropoda. The astragalus and calcaneum, the upper ankle bones, are fused just as in Bambiraptor. The top of the calcaneum has but a small contact facet for the calfbone, indicating that this fibula must have had a very narrow lower end. The metatarsus has an estimated length of, which makes it rather long relative to the remainder of the hindlimb.The foot claws of Dakotaraptor include a typical dromaeosaurid raptorial second claw, or "sickle claw", which was used for killing or holding down prey. It is large and robust with a diameter of and a length of measured along the outer curve. This equals 29% of the length of the thighbone, compared to 23% in Deinonychus. The claw is transversely flattened and has a droplet-shaped cross-section. The flexor tubercle, a large bump near the base, served as an attachment site for flexor muscles - the larger it was, the greater the slashing strength. Dakotaraptor has a flexor tubercle that is larger relative to overall claw size than it is in other discovered dromaeosaurids, potentially giving it the strongest slashing strength of any known member of this group. The flexor tubercle on the third claw of the foot is almost non-existent, very reduced in size compared to other dromaeosaurids, suggesting a more minimized use of that claw. As these are the bony cores of the claws, they would have been covered in a keratinous sheath that extended the "nail" and ended in a sharp tip. The third claw too is keeled but is much smaller with a tip to joint length of and a curve length of. The groove on its outer side towards the tip ends in a bone tunnel, a rare condition.
Classification
Dakotaraptor was placed in the Dromaeosauridae. A cladistic analysis showed that it was the sister species of Dromaeosaurus. They again formed a clade with Utahraptor, of which clade Achillobator was the direct side branch. Despite being related to other gigantic dromaeosaurids, Dakotaraptor was suggested to represent a separate fourth instance of dromaeosaurid size increase, besides Deinonychus, Unenlagia, and the Achillobator plus Utahraptor clade.A recent study conducted by Hartman et al. 2019, proposed a placement of Dakotaraptor in the "Unenlagiidae". If this study proves correct, then Dakotaraptor would have been one of the northernmost genera of Unenlagiine known.
In the recently performed phylogenetic by Currie and Evans in 2019, Dakotaraptor was again recovered as an eudromaeosaur, though the authors noted that the holotype may not represent one individual.
In their description of Dineobellator, Jasinski et al. corroborated this position for Dakotaraptor, but also noted the likely status of Dakotaraptor as a chimaera, casting doubt on this placement as too basal due to the potential composite nature of the taxon.
Possible synonymy with ''Acheroraptor''
Acheroraptor temertyorum is another theropod from the Hell Creek Formation, named in 2013 for a lower jaw, a maxilla, and some teeth. Acheroraptor was diagnosed by multiple features, including the possession of ridges on the teeth. Teeth are the only overlapping features between Acheroraptor and Dakotaraptor. However Acheroraptor is significantly smaller, and differs from Dakotaraptor only in that it possesses vertical ridges on the teeth crowns. Andrea Cau noted that though Dakotaraptor is known from individuals of differing sizes, some of the smaller specimens are also fully mature, and it is possible that the size difference means Dakotaraptor is simply a different species or size morph of Acheroraptor. A phylogenetic analysis presented by Cau, though relying on fragmentary specimens, did not result in a close relationship between the two.Paleobiology
The keeled claw of the second toe, the "sickle claw", was used to bring down prey and had a more robust flexor tubercle than that of Utahraptor. To the contrary, the third foot claw was relatively smaller in size than with other dromaeosaurids and seems not to have had an important function in attacking prey animals.Two morphs, a robust and a gracile one, were present in the fossil material. A study of the bone histology showed that both morphs were adult, so the lighter build of some bones was not caused by a young age. Individual variety or pathologies might account for the difference but the simplest explanation is sexual dimorphism. It can as yet not be deduced which morph was male and which female.
On the ulna of the lower arm, wide papillae ulnares or quill knobs are present, attachment points for large pennaceous feathers. Adult Dakotaraptor individuals were much too heavy to fly. Despite this flightless condition, the feathers were not reduced. There is a variety of possible alternative functions for its wings, including shielding of eggs, display, intimidation and keeping balance while pinning down prey with the sickle claw. These functions however, do not necessitate quill knobs and the describing authors considered it likely that Dakotaraptor descended from a smaller flying ancestor which had them.