Daimler Dingo


The Daimler Scout Car, known in service as the Daimler Dingo, was a British light fast four-wheel drive reconnaissance vehicle also used for liaison during the Second World War.

Design and development

In 1938, the British War Office issued a specification for a scouting vehicle. Three British motor manufacturers, Alvis, BSA Cycles and Morris, were invited to supply prototypes. Alvis had been in partnership with Nicholas Straussler and provided armoured cars to the Royal Air Force, Morris had participated in trials and production of armoured cars and BSA Cycles – whose parent Birmingham Small Arms was involved in armaments – had a small front wheel drive vehicle in production.
Testing began in August 1938. All were of similar size and layout – rear engine and all four-wheel-drive. The Morris design was eliminated first – suffering from poor speed even after modification by its builders. The Alvis prototype – known as "Dingo" – could manage over a cross country course but had a high centre of gravity.
The BSA prototype was completed in September and handed over for testing. By December, it had covered on- and off-road with few mechanical problems. Policy from the War Office changed to a requirement for an armoured roof. The BSA vehicle needed a more powerful engine and strengthened suspension. It was chosen over the Alvis and the first order for the "Car, Scout, Mark I" was placed in May 1939. The actual production was passed to Daimler, which was a vehicle manufacturer in the BSA group of companies.
The potential of the design was recognised, and it served as the basis for the development of a larger armoured car – a "Light Tank ", which would later become the Daimler Armoured Car. The first pilot vehicle was built by the end of 1939, later to be named 'Daimler Scout Car' but already known by the name of the Alvis design - the 'Dingo'.
Arguably one of the finest armoured fighting vehicles built in Britain during the war, the Dingo was a compact two-man armoured car, well protected for its size with of armour at the front and powered by a 2.5 litre 55 hp straight six petrol engine in the rear of the vehicle. An ingenious features of the Dingo's design was the transmission, which included a preselector gearbox and fluid flywheel that gave five speeds in both directions, another was a four-wheel steering system made possible by the H-drive drivetrain, giving a tight turning circle of. Inexperienced drivers found it difficult to control so rear-steering was deleted in later production at the cost of increasing the turning circle by 65 per cent to.
The layout of the H-drive drivetrain contributed greatly to its low silhouette, agility and - an important consideration in any vehicle used for reconnaissance, an exceptionally quiet engine and running gear. Power was led forward to a centrally placed transfer box and single differential driving separate left and right hand shafts, each in turn running forwards and back to a bevel box powering each wheel. This compact layout resulted in a low-slung vehicle with a flat plate that allowed the Dingo to slide across uneven ground but made the Dingo extremely vulnerable to mines.
No spare wheel was carried, considered unnecessary because of the use of run-flat rubber tyres rather than pneumatic types vulnerable to punctures. Despite hard tyres, independent coil suspension gave each wheel approximately vertical deflection and coil springs all round gave a remarkably comfortable ride.
A swivelling seat beside the driver allowed the second crew member to attend to the No. 19 wireless set or Bren gun. The driver's seat was canted slightly off to the left of the vehicle which, in conjunction with a raise-able vision flap in the rear armour, allowed the driver to drive in reverse and look behind by looking over his left shoulder, a useful feature in a reconnaissance vehicle where quick retreats were sometimes necessary.
The Dingo remained in production throughout the war but to bring other production resources into use, the design was passed to Ford Canada, where an equivalent vehicle was built with a more powerful Ford V8 95 hp engine, transmission and running gear. The vehicle superficially resembled the Dingo in general arrangement and body shape, was approximately a foot longer, wider and taller, a ton and a half heavier, less nimble and was louder. While rugged and dependable, it was not as popular as the Dingo, unsurprising given the intended use of covert intelligence-gathering. Total production figures for each type were 6,626 for the Dingo 1939–1945 and 3,255 for the Lynx 1942–1945.

Service

The Dingo was first used by the British Expeditionary Force during the Battle of France. It turned out to be so successful that no replacement was sought until 1952 with the production of the Daimler Ferret. Principal users were reconnaissance units with a typical late-war recce troop consisting of two Daimler Armoured Cars and two Daimler Dingoes. The vehicle was highly sought-after with damaged Dingoes often being recovered from vehicle dumps and reconditioned for use as private runabouts. One such 'off establishment' vehicle was rebuilt from two damaged Dingoes in Normandy, 1944, by REME vehicle fitters of 86th Anti-Tank Regiment, Royal Artillery. They operated this Dingo for about a week before a higher-ranking officer spotted it and commandeered it for himself.
Writing in 1968, author R.E. Smith said that all Dingoes had now been withdrawn from British service - except for one used as a runabout at an armoured establishment - but some might have remained in Territorial Army storage at that date. Many were also purchased from Canada by the Union Defence Force after the Second World War, though few South African examples have survived to the present day, and were also procured in large numbers for Commonwealth patrols during the Malayan Emergency. Ten were purchased by the United States for liaison purposes during the Vietnam War, at least one turreted American prototype being tested with the 7th Cavalry Regiment. In the mid-1970s, the Dingo was still being used by Cyprus, Portugal and Sri Lanka. Some may have been in reserve store with other minor nations. Surviving vehicles are now popular with historical re-enactors with reconditioned Dingoes commanding a good price.

Variants

Production went through 5 variants, which were mostly minor improvements. 6,626 vehicles were produced from 1939 to 1945.
;Mk I
;Mk IA
;Mk IB
;Mk II
;Mk III
Museum, Israel
Another Dingo clone, the Autoblindo Lince was developed by Lancia, Italy. In 1943-1944, 129 cars were built. They were employed by both German and RSI forces.