DR1' — Introduced in 1963. On units DR1-01 through DR1-08, the shape of the front fascia was rounded and looked like that of ER1 electric multiple unit. The entire first batch has been decommissioned. DR1' — The first unit of the batch, DR1-09, was introduced in 1966. Some of the units were named DR1M. The design of the front fascia of this batch of units is completely different. The DR1A-014 and later units were equipped with then-new types of headlights. Units with older headlights were withdrawn. These newer versions are still in service as departmental units in Russia. In Belarus, all of them were converted to DRB1m units. These early DR1 unites were numbered DR1-09 to DR1-053. DR2 — A modification of second-batch DR1 units that were equipped with engines installed under the carriage instead of behind the cab, as was usual. Only one such prototype was built in 1966. DR1P — The prototype unit DR1P-030 was completed in 1969, and had a starter/generator instead of a separate diesel generator installed. Mass production began with the DR1P-054 unit. DR1P units are numbered DR1P-054 through DR1P-122, and DR1P-400 through DR1P-404. Almost all of them have been decommissioned. DR1B1/DR1B1m/DR1pT — Refurbished DR1/DR1P units for Belarus Railways. The control carriages of these units have the same exterior design as DR1AM's control carriages. The decommissioned driving carriages were replaced with 2M62/2M62U diesel locomotives. DR1A' — The prototype, numbered DR1A-405, was assembled in 1973. Mass production began with the DR1A-123 unit manufactured in 1976. These units are still in service in some countries formerly occupied by the USSR. In Russia, units of this type have all been decommissioned. DR1A' — The prototype, numbered DR1A-168, was finalized in 1977, and its front fascia got a complete facelift. However, its mass production started only after the dissolution of the Soviet Union, with minor changes to the units' headlights. These units are still in service in some of the countries formerly occupied by the Soviet Union. In Russia, these units were all decommissioned, because of the introduction of RA2 railbuses. The last Russia-based DR1A unit was delivered to the Kaliningrad Rail Museum in 2016. DR6 — This trainset was based on second-batch DR1A units, and was constructed in 1990 for Cuban Railways. The units of this type have several improvements over earlier versions. DR1AM — These are refurbished DR1A units in use by Georgian, Latvian, Lithuanian, and Ukrainian railway operators. The unit formation was reduced from five/six to three cars per trainset. In the 1990s, these units were equipped with new driving carriages that were converted from non-driving carriages. Both DR1A batches were refurbished; however, the driving carriages' exterior was always refactored into the style carried by second-batch DR1A units. 500 Series DR1B — Newer trainsets built for Belarus Railways with an improved design. Equipped with driving carriages. They were officially named the 500 Series DR1B to prevent being confused with DR1B units. DR1B — Refurbished DR1A sets in Estonia with original carriage formation. In Estonia, these were run by Edelaraudtee, and were all withdrawn from service in 2014, because of the introduction of Stadler Flirt units, and because of the end of Go Rail international services. Some trainsets were sold to Kazakhstan. DR1BJ — Refurbished DR1A sets in Estonia. Their carriage formation was reduced from five/six to three cars per trainset. These were equipped with new driving carriages that were converted from non-driving carriages in the 1990s. Both batches of DR1A were refurbished. Unlike the DR1AM, the driving unit's design is similar to the later versions of ER2/ER9 electric multiple units. DR1AC — Refurbished DR1A units of Latvian Railways. After being refurbished, they look exactly the same as 500 Series DR1B units. DRL1/MDP — Refurbished DR1A units of Belarus Railways. The carriage formation was reduced from five/six to three cars per trainset. Equipped with new driving carriages converted from non-driving carriages in the 1990s. Both batches of DR1A were refurbished; however, the exterior of each unit's driving carriage was refactored in second-batch DR1A style. Unlike DR1AM units, the driving carriages were converted from driving engine carriages, and not from non-driving carriages. AR1/AR2 — A railbus internally based on DR1A design, but equipped with engines installed under the carriage instead of being installed behind the cab, as had been standard in DR2 units.
In service
Formations
Different combinations of carriages are possible:
Original non-refurbished trainsets:
Modified for DR1AM/DR1BJ/DRL1/MDP trainsets:
In the Soviet Union, commuter trains did not get 1st or 2nd class seats, as each DR1 train was equipped with only one type of seat. Often, the seats were made of wood. The DR1B trainsets operated by GoRail in Estonia were equipped with space for bicycles, making the setup similar to one that originated with trains in western Europe.
