Comparison of baseball and cricket
and cricket are the best-known members of a family of related bat-and-ball games.
Despite their similarities, the two sports also have many differences in play and in strategy. A comparison between baseball and cricket can be instructive to followers of either sport, since the similarities help to highlight nuances particular to each game.
Bat-and-ball games
Bat-and-ball games, in general, are sports in which one team has possession of the ball and delivers it to a member of the other team, who tries to hit it. The two opposing teams take turns playing these two distinct roles, which are continuous during a specified interval. This contrasts with "goal-oriented" games, such as all forms of football, hockey, and basketball, in which possession of the ball or puck can change in an instant, and thus "attackers" and the "defenders" frequently reverse roles during the course of the game.In both cricket and baseball, the players of one team attempt to score points known as runs by hitting a ball with a bat, while the members of the other team field the ball in an attempt to prevent scoring and to put batting players out.
Once a certain number of batting players are out, the teams swap roles. This sequence of each team taking each role once is called an inning in baseball, and an innings in cricket. The single/plural usage in cricket is comparable to the baseball slang term for a single inning as the hitting team's "ups". A baseball game consists of nine innings per team, while a cricket match may have either one or two innings per team.
Other present-day bat-and-ball games include softball, stickball, rounders, stoolball, pesäpallo or Finnish baseball, punchball, kickball, and British baseball. Earlier forms include The Massachusetts Game of baseball, which was similar to rounders, and Old Cat.
Field
Baseball
Baseball is played in a quadrant of fair territory between foul lines. The official minimum distance from home plate to the nearest fence, stand or other obstruction is, and the recommended distances are at least along the foul lines and in centre field. This produces a recommended fair territory field area just over. Most Major League Baseball parks have fair territory areas in the range of.Cricket
In contrast, Test and One Day International cricket is played on a field with a minimum width of and length, giving a minimum area of, assuming an elliptical shape. However the shape of a cricket ground is not fixed. Test grounds around the world are typically, an area of about, ranging up to or at a venue such as the MCG.Bowling/Pitching distance
In cricket, the pitch is a prepared rectangular area between two wickets. Its length is the distance between the wickets,. While its width is 12 feet or 3.66 metres in length, the width of the playing area on that pitch is distance between two return creases, which are 8 feet 8 inches or 2.44 metres apart. The popping creases at each end of the pitch, from which the bowler bowls and the batsman plays, are 4 feet or 1.22 metres in front of the wickets. The bowling, popping and return creases are defined by contrasting lines, generally white in color.In baseball, the pitcher must deliver from a rubber slab that lies atop a raised area of the infield called the "pitcher's mound". The front of the rubber is from the rear point of home plate. Before the advent of the pitcher's mound and the rubber, the pitcher threw from within a rectangular "pitcher's box". There was a large rectangular dirt area, between the pitcher's box and the batting areas around home, which resembled the cricket pitch.
The bowler at the moment of delivery must have part of the front foot behind the popping crease and be within the return crease. The rules do not prohibit delivery of the ball from behind the popping crease, and the ball may be released from well behind the crease. The ball must be "bowled," not thrown, and, since 2000, not delivered with an underarm action. The batsmen "take guard" or "block" in front of the wicket, and they may choose to do so in front of or behind the popping crease. That nets to a typical distance of about between the delivery point and batsman.
In baseball, the pitcher's release point could be about depending on his delivery style, but the batter also tends to stand back or "deep" in the batter's box, to maximise his time to "look the ball over", up to further from the pitching rubber than the point of home plate is. Thus the horizontal distance, from release of the ball by the pitcher/bowler to its arrival at the batter/batsman, is similar in both sports. However, the ball usually travels further in cricket as it normally bounces off the ground first, adding a significant vertical component to the total distance travelled.
Play
Fielding
The main difference in fielding in the two sports is that even though a cricket ball is harder and heavier than a baseball, generally fielders in cricket are not permitted to use gloves or external leg guards. The only fielders who wear protective gear are the wicket-keeper, who is allowed to wear padded gloves as well as leg guards and an abdominal protector or box; and fielders in potentially dangerous close-in positions such as silly point and short leg may wear leg protection underneath their clothing, boxes and helmets but are still not allowed any gloves. In baseball, catchers and first basemen normally wear mitts, which have no fingers and are specially designed for each respective position. The other fielders wear gloves with fingers. This means that the risk of hand injury due to the impact of the ball is far higher in cricket. Also, especially in Test cricket, it is common for several fielders to be stationed close to the bat since the likelihood and value of dismissing a batsman by a catch in a close fielding position is higher.Baseball games have far lower scores than cricket matches. The largest combined runs total in a single game in the history of Major League Baseball is 49, whereas first-class cricket matches, including Tests, have produced combined totals from all four innings of over 1000 runs.
For a more direct comparison, matches in Twenty20 cricket, a form of limited overs cricket in which games last about the same time as a regulation baseball game, frequently produce combined run totals of 300 or more, with the all-time record being 489. Each run in a baseball game is roughly 75 times as important as a run in a Test cricket match ; therefore moments of poor pitching and individual fielding mistakes are much more costly. A baseball player who is a great hitter will start games regularly regardless of how good his fielding is, but a player who is merely an above average hitter, but who is not a competent fielder, may not play regularly, or may be used only in the designated hitter position in leagues that use it.
Baseball players often need to throw immediately after catching the struck ball, while this is unnecessary in cricket as the ball is deemed "dead" when a dismissal takes place. Hence, fielders in cricket have a greater incentive to dive and take a catch due to the fact that a run out is generally much harder to achieve in comparison to baseballers throwing runners out.
The configuration of the baseball diamond effectively bars left-handers from the fielding positions that make throwing to first base a primary responsibility. Right-handers can throw to their left – i.e., toward first base – with much greater ease than can left-handers. So in practical terms, all second basemen, shortstops, and third basemen are right-handed. Left-handed catchers are also exceedingly rare; while the reasons appear to be primarily cultural, handling bunts up the third-base line and throws on plays at home pose particular obstacles to left-handed catchers.
While most throws a first baseman must make go to the right, which a left-hander can generally accomplish with greater speed and fluency, this is a relatively small factor to the advantage of a left-handed first baseman. More important advantages are related to the position of a left-handed first baseman with respect to the base. First, a left-handed first baseman has an advantage over his right-handed counterpart when catching a pickoff throw from the pitcher—when a first baseman is in pickoff position, standing in front of the bag, the left-hander can catch the ball and make a tag without having to move his arm across his body. Second, because the first baseman starts most plays with his left leg closer to the base, the left-hander does not have to make a half-pivot to get into the correct position to stretch out for a throw. For these reasons, left-handed throwers are far more common at first base than in the general population of baseball players. In contrast, cricket is fielded in the round: the handedness of the fielder in any given position is of far less consequence due to the priority being placed on catching rather than throwing, coupled with the fact that the batsmen are running in opposite directions and both left-handed and right-handed throwers are found in all parts of the field.
cricket match in progress at Eden Park. The lighter strip is the cricket pitch.
Body contact between runner and fielder is frequent in baseball, particularly at home plate. This is driven to a large extent by the manner in which a runner is put out. In both sports, rules prohibit interfering with runners. However, in baseball, the runner himself must be tagged by a fielder holding the ball, to be put out. The catcher awaiting a throw will often stand between the plate and the runner. Once he catches it, the runner might try to go around the catcher, or he might simply bowl the catcher over, if he thinks he can dislodge the ball by such contact; and if the catcher does not have the ball, the runner may still bowl the catcher over, which is considered fair because by rule a fielder without a ball cannot impede a runner. By contrast, in cricket, the stumps are the target for "tagging" rather than the runner. No contact with the runners is either necessary or allowed. Contact between opposing sides is rare, and is usually not deliberate. Violent contact between players was once even greater in baseball, as before the Knickerbocker Rules it was permitted in some versions of the game to literally "throw out" a runner by hitting him with a thrown ball. This rule still exists in some versions of the baseball variant called kickball, which is played with a soccer ball and thus is much less injurious. Except when played batting in a hands-down position, kickball also calls for literal "bowling" of the ball, underhand, as with the old rules of both cricket and baseball. "All 'round hands down" kickball leagues exist, but in most of these, the ball is pitched with the face or shoulders.
Batting
One of the main differences between baseball and Test cricket is the primary intent of the batsman. Usually, in Test/First Class cricket, wickets come at a far higher premium, since survival is of primary importance. While nine innings per side are played in a baseball game within a few hours, only two per side are played in Test cricket over five days, so the cost of a dismissal is far higher in cricket. It should be kept in mind that a batsman in cricket is not obligated to take a run after striking the ball, nor is there any penalty for swinging at the ball and missing unless it hits the stumps and there is no limit to the number of deliveries a batsman can face; a batsman with the required concentration, determination and technical ability often bats for several hours without being dismissed. By contrast, in baseball a batter takes a serious penalty if he swings and misses: three strikes result in an out, and if the batter hits the ball inside fair territory he must run. This contrast means that in cricket, unlike baseball, the quality of a batsman's defensive game and footwork are of the utmost importance. The nuances of batting technique are also greater in cricket, since the interplays between bowling variations, field placements and scoring strengths are more dynamic. Since cricket is played over an extended duration, the bowler and the fielding captain have time to "work over" a batsman. Thus, cricket batting requires a very tight technique and the ability to withstand sustained examinations.The area for legal deliveries is much larger in cricket than it is in baseball, overlapping the batsman's entire body. Deliveries that reach the batsmen at rib or shoulder height are legal, and quite common. Depending on the form of the game, more or fewer deliveries can be bowled to reach the batsmen at throat or head level. Any fear or hesitation can lead to a batsman playing a poor shot which may result in him giving away his wicket.
Since the cricket bat is wide and flat, while the baseball bat is narrow and round, on the whole cricket batsmen find it easier to hit and direct the ball than baseball batters, resulting in many more runs being scored in a cricket match. While bowlers can influence the ability of the batsmen to do so, perhaps the most famous episode being the Bodyline tactic, cricket batsmen can use a wider variety of batting strokes to direct the ball in many directions into a field which provides much more open space than in baseball. Keeping in mind, cricket batsmen are under no obligation to attempt to score a run after any stroke, but must strike balls to prevent them from hitting the wicket or their pads. Many strokes are in fact defensive in nature against a well-bowled ball and the quality of defensive batting is often the determining factor of a batsman's success over his career, especially in the longer forms of the game.
.
By contrast, the balance of power is largely reversed in baseball. While particularly skilled batters have some ability to place hit and direct the ball to desired locations, the pitcher's influence is much more dramatic. Pitchers induce more ground outs, fly outs, or strikeouts, depending on the style of pitch. Thus particular pitchers are known for causing batters to make certain kinds of outs, depending on their mastered pitches. Also in contrast to cricket, baseball batters must attempt to take first base on any ball put into fair territory, and failing to do so will result in an out, but the size of the strike zone more strictly limits the set of deliveries that must be swung at compared to cricket. Like cricket, baseball batters do have a defensive tactic available; many batters will often attempt to deliberately foul off pitches that are strikes yet difficult to hit well, by hitting them into foul territory, awaiting an easier delivery later in the at-bat. Since an uncaught foul ball cannot be a third strike, this tactic allows the batter to receive more pitches.
swings with a pull shot towards mid wicket in this picture.
In the early generations of baseball, the emphasis was mostly on bat control, place hitting, bunting, etc. But, starting in 1919, several factors resulted in a dramatic expansion of strategic orientation, supplementing traditional "small ball" with the "power game": a "livelier" ball, because of better materials and a tighter weave; more frequent substitutions of new balls; lighter, more flexible bats; the outlawing of the spitball; and the increase in attendance which drove owners to build more outfield seating, thus reducing the outfield area significantly. The power game has been encouraged further in recent years, by the construction of new ballparks with smaller outfields than previously, and even the reduction of field size at "classic" ballparks known for spacious outfields; for example, the distance to the fence in deep left field at the original Yankee Stadium was reduced from between 1984 and 1988. Still, it is generally agreed that no one can hit a home run at will, and every successful batter knows never to go to the plate intending to hit a home run. Rather, he should attempt a level swing, try to pull only the ball on the inside of the plate, go the other way with balls low and outside, and otherwise start each at bat intending to drive the ball up the middle, which is the most vulnerable part of the infield.
The games emphasise power hitting to different degrees. Cricket requires the accumulation of large numbers of runs; and placement of the ball between the fielders produces runs efficiently and is generally accepted as a better strategy than "swinging for sixes". In baseball, power hitting can produce runs quickly and frequently in many situations, as well as force pitching changes and other fielding moves; but it can also result in a great many strike outs, fly outs, and ground outs. In cricket situations can arise in a match where power hitting, also called "slogging", is required. This typically occurs towards the final overs of a limited overs game and can also be an option to get runs for batsmen even earlier in the innings. It is still quite risky.
Bowling/pitching
Cricket bowlers, since they are not restricted to a small strike zone as their target, also use a wide variety of approaches which are not available to baseball pitchers. These involve varying the line and length of deliveries and using unpredictable movement caused by the ball bouncing on the pitch before it reaches the batsman. Baseball pitchers, by contrast, must use changes in ball speed and movement caused only by air friction and spin to deceive batters, as most pitches which come near touching the ground are ineffectively allowed to pass as balls. The raised undulating stitching on a baseball allows an accomplished pitcher to create a huge variety of motions in the air; even fastballs are thrown in such a way as to create certain kinds of movement. The cricket ball also moves in the air, to a lesser degree than the baseball, but it achieves its most pronounced movement on the bounce, with seamers landing the ball on the seam to create slight but unpredictable turn, and spinners using spin to create significant turn and bounce variation. Furthermore, pitchers must begin their throw from a stationary position, while bowlers may run up to their delivery. Baseball pitchers also throw from an elevated mound, while cricket bowlers are at the same height as the batsman and must bowl with an overarm rotation of the arm during which the arm must not straighten by more than 15 degrees. Despite the differences in delivery action, the delivery speeds are similar for both sports with the fastest bowlers and pitchers propelling the ball in the region of : the fastest recorded cricket delivery is with baseball's record quicker at. It is the case, however, that baseball pitches near or at 100 mph are considerably more common than bowled balls of comparable velocity in cricket. The bowler in cricket is much more restricted with respect to how much he can straighten his arm in delivering the ball, and this is one very significant reason why baseball pitchers can deliver the ball faster with more frequency.One main difference, however, is that the ball in cricket is harder and heavier in weight. The legal weight for the ball in baseball is from ; whereas the ball in cricket must weigh between.
Cricket's bowlers are grouped into different categories based on their bowling style—pacemen, seamers, off-spinners, leg-spinners —though a bowler may fall into more than one category. The faster bowlers usually open the bowling, when the ball is at its hardest and smoothest. Spin bowlers generally bowl later, when the ball has begun to deteriorate and become rough.
Baseball's pitchers are classified primarily by their throwing hand and their usual role in games. A starting pitcher begins games, typically not more than one game in five, in a rotation with four teammates who are also starters who will start games in a sequential cycle, and usually pitch five or more innings. Starters rarely appear as substitutes in games started by others. A relief pitcher enters games later, sometimes on short notice in crisis situations in which there are already runners on base and/or the opponent's best hitters due to bat, and usually pitches fewer innings in any given game. But relievers may be called upon to pitch in several games consecutively. Some relievers even specialise further strictly as closers brought in just to pitch the last inning of a game in which his team leads by a narrow margin. Perhaps the most specialised group of relievers is left-handed specialists—left-handed pitchers who pitch almost exclusively to left-handed batters. More often than not, such a pitcher will face only one batter in a given game.
Pitchers are sometimes secondarily grouped according to pitching style, type of pitch most often used, or velocity. This is especially common when pitching technique is rare or unusual. For example, there are many different variations on how the pitch is delivered, including the conventional overhand in which the ball is thrown from the 12 o'clock position, 3/4 styles, as well as the less common sidearm and 'submarine' deliveries. The submarine pitch is rare, and a pitcher who throws in this way usually has a 'submariner' attached to his name or description. Similarly, there are many kinds of pitches thrown, including the fastball, curve ball, slider, and knuckleball. Capable knuckleballers are extremely rare and are usually described by this skill first.
For reasons that continue to spur debate, it is historically the case that most right-handed pitchers succeed at higher rates against right-handed hitters than against left-handers, and that most left-handed pitchers succeed at higher rates against left-handed hitters than right-handers.
One substantial strategic element to baseball is to use this phenomenon as much as possible. Defenses try to force a match between pitcher and hitter by side, and offences attempt to mismatch them; both teams use substitutions at times to accomplish the desired outcome. One response to this phenomenon is that many hitters, among them a number of the finest and most powerful to play the game, such as Mickey Mantle, Eddie Murray, and Chipper Jones, became adept as youngsters to hitting both left-handed and right-handed to prevent defences from using that advantage against them. Many professional clubs employ as many as two or three switch hitters so as to neutralise the advantage of side selection. However, only one switch pitcher has played in the major leagues in modern times.
bowler Shane Warne about to release a spin delivery.
Brett Lee's follow through
In addition, if a baseball batter is struck with a pitch, he is awarded first base; "hitting" the batter includes hitting loose parts of his uniform without hitting his body. Pitchers may throw close to the batters, and a "brushback" is often used as an intimidation tactic. Deliberately hitting a batter is fairly uncommon, however, chiefly because it is punished severely. If the umpire believes a batter was intentionally hit, the umpire has his discretion on a first offence to warn both benches that the pitcher for either team will be expelled from the game if there are any further hit batsmen. The warning—and the power to expel if it is contravened—is intended not only to protect batters but to avert fighting; being hit by a fastball is taken seriously by batters, and bench-clearing brawls occasionally result when one team decides the other is deliberately throwing at its batters. Amazingly, in the history of the major league game, only one player has ever been killed by a pitched ball striking him in the head. This occurred before the invention of the batting helmet and was the principal cause for introducing this piece of equipment into the game as well as replacing dirty balls and outlawing the spitball.
In cricket, bowlers consider the right to hit a batsman as part of their armoury; indeed, one of the most common methods of dismissal requires the bowler to hit the batsman's body rather than his bat. A fast bowler will punctuate his overs with deliveries intended to bounce up toward the batsman's head, either to induce a poor shot which may result in the batsman being caught out, or to intimidate the batsman, making him less likely to play forward to the next few deliveries for fear of injury. These tactics have long been an accepted part of cricket. In the modern game, batsmen usually wear helmets and heavy padding, so that being struck by the ball only rarely results in significant injury—though it is nevertheless often painful, sometimes causing concussion or fractures. Baseball batters wear helmets, but they are unsecured and lack the "cage" since only one side of the head/face is exposed. Catchers typically wear a helmet with a cage or protective bars. An equivalent to a batter being hit by a pitch in baseball, where the ball hits the batter without bouncing first, would be a beamer in cricket. These are rare and usually caused by the ball slipping out of the top of the bowler's hand. The even rarer intentional beamer provokes strong reaction from batter and crowd alike. The umpire is authorised to take disciplinary action in such instances. The bowler is generally given a first warning, and is dismissed from the game if the offence is repeated. A notable such case was between Waqar Younis and Andrew Symonds: Younis was banned from bowling by umpire David Shepherd for delivering a beamer to Symonds in a match between Pakistan and Australia at the 2003 World Cup; it was the first of only two times it's ever happened during an international match.
There is a major difference in the way in which different bowlers or pitchers contribute to a single game. In baseball, a single pitcher starts the game, and makes every pitch until the manager replaces the tiring pitcher with a relief pitcher. Replaced pitchers cannot return to pitch again in the same game, and a succession of pitchers may come into the game in sequence until it ends. In cricket, two bowlers begin the game, with those not actively bowling spending time as fielders. Every player in the team, including the wicket-keeper but excluding the 12th man, is available to be used as a bowler. Bowlers alternate bowling overs of six balls each. A bowler will usually bowl for a 'spell' of several overs, and will generally bowl the entire spell from the same end of the pitch. A second bowler will bowl the overs missed by the first, from the other end of the pitch, for his own spell. After a bowler is taken off, he may be, and often is, asked to bowl another spell later in the same innings. Although moving a pitcher to a fielding position and returning him to pitch later in the game is legal in baseball, it is a rarely used and potentially risky strategy, as the pitcher may be unprepared to play another position.
The terms "bowling" and "pitching", as words, both denote underarm deliveries, as were once required in both games. The rules for delivery were also initially very similar. Once overhand deliveries were permitted in the respective sports, and pitchers were compelled to toe the pitching rubber instead of throwing from anywhere within the "pitcher's box", the actions of bowling and pitching diverged significantly.
The "wide" in cricket and the "ball" in baseball both derive from the concept of a "fair" delivery, i.e., a delivery that the batter or batsman has a fair chance of making contact with his bat. While there is no sharply defined "strike zone" in cricket as there is in baseball, in both cases the umpire must judge whether the ball was delivered fairly. Both the "wide" and the "ball" result in a "penalty". In cricket, like a no-ball, a single run is awarded to the batting team and it does not count as a legal delivery. In baseball, a ball is called, and if a pitcher gives up four balls the batter is awarded first base, which is called a "base on balls" or a "walk". A walk will only score a run directly if the bases are already loaded, forcing the runner at third base to advance to home ; otherwise the threat is merely of another runner reaching base instead of making an out. However, since runs are scored so much more frequently in cricket, the occasional wide, scoring a run directly, is not taken too seriously, although the extra delivery can be of vital significance toward the end of a match. In both games, a wide or a ball can be the decisive factor in winning a match or a game.
Running
Running plays a much larger role in baseball because of the low scoring; also, players on the batting team must run much further to score a run, because runners may remain in play without scoring, and because baserunners can advance to the next base before the ball is hit again as soon as the ball is live. Base stealing often requires sliding, in which the runner throws himself to the ground to avoid being tagged or over-running the base. The runner may also deliberately slide into the fielder at the base he is trying to steal to keep him from catching the ball or to disrupt a double play. At home plate the runner often will simply, and legally, run into a catcher who is blocking the baseline but who does not have the ball.The equivalent in cricket is almost impossible because the bowler is next to the non-striker, and in fact is able to mankad him if he strayed out of his crease. Tactical running in cricket rarely strays beyond the consideration of "can I make it to the other end before the ball does". One exception of this is towards the end of a closely fought limited overs game, where a batsman would sacrifice his wicket to allow the better batsman to remain on strike, usually in the last few balls. While in baseball, steals, sacrificial running, forces, double plays, intimidation, and physical contact enter into the equation.
Making contact with a fielder, as baserunners often do, would be unsportsmanlike in cricket, and unnecessary, as play stops when a single wicket is taken. Occasionally a cricket runner will dive over the crease, but in baseball this is a regular occurrence, as players are frequently forced to run even when their chances are slim.
Since a team almost always scores fewer runs in a baseball game than its number of outs, a baserunner will frequently take risks attempting to advance an extra base or to score a run, resulting in close plays at a base. In cricket, since the number of runs scored is much greater than the number of wickets taken in a match, a batsman would be very foolish to risk getting run out in an attempt to score an extra run without a very high expected chance of success. In general, cricket batsmen are run out due to exceptional fielding, poor judgment/communication, or a combination of said factors. In baseball, runners are often out not of their own accord – they are simply forced out.
Game length
A direct comparison is difficult since cricket is predominantly played in three different formats: Test, One Day International and Twenty20 matches. Of these, the Twenty20 format takes much the same time as a baseball game: around three to three-and-a-half hours. Baseball games are generally much shorter than Test and One Day cricket games. Most Major League Baseball games last between two-and-a-half and four-and-a-half hours. Because the Major League playing season is 6 months long, with 81 games played at home and 81 away, baseball teams often find themselves playing double-headers and series games. A doubleheader entails two games, played back to back, in one day. This usually occurs when a game needed to be rescheduled, and is a common occurrence at the beginning of the Major League season, which coincides with the rainy spring season. Although they were once common, double-headers are rarely scheduled any more by teams, but are part of the culture of baseball, with Ernie Banks' "Let's play two" a famous refrain. A series occurs when two teams play on several consecutive days. This is a part of the regular schedule in baseball because of the number of games required in a season, and because there are large distances between stadiums in the US and Canada, thus conserving time and resources by allowing the teams to spend several days in a single location. In Major League Baseball there is a maximum of 20 days consecutively played before a break in games must be observed.In cricket, test matches and certain domestic first class matches can last up to five days, with scheduled breaks each day for lunch and tea, giving three sessions of play each day. Full length games, for example between English counties or between Australian states, have a similar format to Test matches, but either three or four days are allowed.
The limited overs versions of the sport usually last up to 7 hours. Twenty20 has innings of twenty overs per team and generally takes around 3 hours.
One Day Internationals and Twenty20 cricket, with their inherent limit on the number of fair deliveries, do not have an exact equivalent in baseball. The closest comparison would be games that have a pre-set number of innings shorter than the standard 9 or a pre-set time limit of some kind, such as a curfew restriction, or in the case of one of baseball's cousins, recreational softball, a pre-set length of the game, such as one hour. In winter ball Caribbean leagues doubleheaders are commonly pre-set to last 7 innings instead of 9, except if they are necessary as tiebreakers.
Strategy
A wide array of factors affect both games and numerous strategies in both games can be employed to exploit these factors. Other than the bowler, cricket places very few restrictions on fielding placement, even for the wicket-keeper, and its variety of bowling styles, 360 degrees of open field, wide bowling area, and so on give scope for strategic play. Notable exceptions include the limit of two fielders in the leg side quadrant, introduced to prevent the use of Bodyline tactics, and limiting outfield players in the early stages of limited overs matches and the subsequent introduction of powerplays. In baseball, there are very specific rules about the positions of the pitcher and the catcher at the start of each play. The positioning of the other seven fielders is as flexible as cricket, except that each one must start the play positioned in fair territory. The fielders are otherwise free to position themselves anywhere on the playing field, based on the game situation.Condition of the ball
A major element of strategy in these sports is the condition of the ball. Since bowling in cricket has more variations, the condition of the ball also affects play to a great degree. In Test cricket, the same ball must be used for at least 80 overs unless it is lost, damaged or illegally modified at which point it must be replaced with a used ball in a similar condition. After the 80 overs, obtaining a new ball is at the discretion of the fielding captain – who will often ask for a new ball immediately, since a new ball is harder, smoother, bounces higher and has an intact seam, which produces greater conventional swing. But when a captain feels that a spin bowling attack is more likely to be successful, he will persist with the old ball, which is rougher and better grips the surface as well the bowler's fingers. In baseball the ball is replaced numerous times during a game to ensure it is in optimum condition.The aerodynamics of swing in cricket are different from baseball. Moreover, the raised seam also causes movement off the pitch in cricket, which is a very important part of medium pace bowling. Once a particular hemisphere of the cricket ball is more rough or scratched than the other, the fielding team meticulously works to preserve the shine on the other half by rubbing it on their clothes or by applying saliva. Bowlers very carefully regulate their wrist position at the point of release to ensure the shine is preserved only on one half of the ball, since it will swing towards the rough side.
The old ball in cricket also tends to generate greater amounts of reverse swing, which is swing towards the polished side. This can be exploited by genuinely fast bowlers. Especially on pitches in the Indian sub-continent, which tend to have abrasive surfaces, bowlers might resort to bowling across the seam as early as the tenth over, so as to quickly scruff up the ball and generate reverse swing early on. Strategies that rely on early reverse swing also need the backup of effective spin bowlers to be able to exploit the roughed up ball.
Due to these factors, a batsman in cricket needs to watch very carefully how the bowler grips the ball even during his run-up, as well as the type of revolutions on the ball as it approaches. Master spin bowlers like Shane Warne and Muttiah Muralitharan, who were able to dramatically vary the trajectory, direction and extent of spin, frequently bowled deliveries with a scrambled seam to disguise the type of ball actually bowled.
Batting first or last
In cricket, since the strategies are greatly influenced by factors such as soil characteristics of the pitch, condition of the ball, time of the day, weather and atmospheric conditions, the decision to bat first or last is of great tactical importance.The team that wins the coin toss has the choice of batting first or last. This choice can be crucial to success; particularly in Test cricket. As the pitch is used for up to five consecutive days with little maintenance, the deterioration of the pitch with wear can have a major influence on the result of the match. It is usual for some amount of grass to be left on the pitch on the first day of a Test, since it helps bind the surface. The presence of grass on the pitch is conducive for pace bowling, so a grassy pitch may also tempt a captain to field first. Sometimes, weather conditions also influence the decision, since a cloud cover has been found to assist swing bowling. Aggressive captains such as Allan Border of Australia have been known to bat first in Test cricket regardless of the conditions.
In One Day International cricket, the time of day is also a crucial factor in determining the captain's decision at the toss. In some parts of the world, dew on the ground can be significant. In a day-night game, grounds in some countries like India or South Africa become wet due to dew, which makes it difficult for a spinner to grip the ball. The captain must balance this against a consideration for bowling becoming more effective under lights, since the ball might skid off any dew on the pitch or get assistance in swing from the cooler night-time air. Even for a day game, the captain might be inclined to exploit early morning dew on the pitch.
In baseball, on the other hand, the "home" team always bats last. This was not originally the case. In the early years, the winner of a coin toss could decide whether to bat first or last. The more offence-oriented aspect of the early game might influence a team's decision to bat first and hope to get a quick lead. This led to the occasional unfortunate situation where the home town crowd would have to watch their team lose a game in the last of the ninth inning, in "sudden victory" fashion by the visiting team. By the late 1800s, the rule was changed to compel the home team to bat last. At a "neutral" site, such as the College World Series, the "home" team may be decided by coin toss, but that "home" team must bat last.
Fielding strategy
In cricket, since the batsmen can hit the ball with greater variation and different objectives, the field placements are more important and varied. Modern-day coaches and captains have intricate knowledge of the strengths of opposition batsmen, so they try to plug the dominant scoring areas for each batsman. Moreover, since the bowling attack has greater variety in cricket, the field placements required for each type and line of attack also vary greatly.Depending on the scoring strengths of the batsman, the captain must make adjustments to the field each time the batting pair score a run and change ends, which can possibly happen after every ball in an over. To meet the demands of a speedy over-rate, the captain must arrange the fielders in a way that they can swiftly interchange positions for the two batsmen. This is especially important if one batsman is right-handed, while the other is left-handed. And also in limited overs cricket if the umpires deem the over rate of the team fielding first is too slow they can dock them overs so they may have less than 20/50 overs to reach their target score when it is their turn to bat.
Fielders in cricket can field in all positions, but modern players have specialised field positions. In particular, slip positions require special skills since the slip fielder is placed behind the batsman and the ball comes directly off the edge of the bat. Close catching positions such as forward short leg and silly point, as well as positions for the cut shot such as gully and point, require very fast reflexes and canny anticipation, so they are also specialist positions. Conversely outfielders also can be specialist positions due to the need for a strong throwing arm.
In baseball, although only the positions of pitcher and catcher are prescribed by the rules, fielders' positions are dictated closely by custom, and shifts in fielders' positions according to circumstance are less dramatic; the strike zone and smaller angle of fair territory limit the usefulness of some strategies which cricket makes available to batsmen. The chief occasion on which fielding placement differs markedly from the usual is the presence of a pull, or dead-pull, hitter at bat. In such case the fielders will move so far in the direction of the pull that one half of the field is almost completely unprotected. This is called an infield shift or overshift. A six-man infield has also been used when circumstances warrant. For the great majority of batters, however, the traditional fielding arrangement is used, with minor changes in position to accommodate the batter's power or bat-handling ability, the location of runners, or the number of outs. However, baseball has no equivalent of cricket's close-in fielders, because it is impractical to have fielders so close to the bat as they would have virtually no chance of latching onto a ball travelling so fast. It is possible to place a close-in fielder to catch a bunt, but this practice is almost never followed except in specialised circumstances such as a pitcher being forced to bat late in a game, with less than two outs and the opportunity to drive in a run. The team's best chance to score in such a situation may be to sacrifice bunt and may warrant the first or third baseman playing halfway up the line to cut off the run at home.
In cricket, coaches cannot intervene or direct gameplay; the captain must make all the calls once the players are out on the field. However, the coach may convey messages to the captain or the players at any time, since there is no restriction on signalling or speaking to players on the field. In dynamic situations, like a run chase with an imminent possibility of rain, it is quite common for coaches to update tactics using signals. Hansie Cronje, the former cricket captain of South Africa, once took the field with a wireless link to the coach, Bob Woolmer. Subsequently, the use of gadgets to transmit messages was banned by the International Cricket Council. Regardless, the coach is merely an adviser; it is almost always the case that the cricket captain has complete authority over the team once play starts. In baseball, by contrast, managers and coaches will often direct the players to carry out a play, or to field at a particular depth. In fact, "stealing signs" can play an important part in baseball strategy when a player on an opposing team tries to interpret hand signals between pitcher and catcher or between runner and base coach, and possibly then relay this information to another player without being themselves detected.
Strategy over the course of the game
In both sports, strategy varies with the game situation. In baseball, pitcher, batter, and fielders all play far differently in the late innings of a close game than they do early, or when one team has already scored many more runs than the other. The number, speed, and position of baserunners, which have no equivalent in cricket, all dramatically change the strategies used by pitcher and batter. A runner on first base must decide how large a lead to take off the base—the larger the lead, the greater the chance of advancing on a stolen base or batted ball, but also the greater the risk of being picked off by the pitcher. In leagues which do not allow designated hitters, strategic thinking also enters into substitutions. For example, in the double switch, the substitution of a relief pitcher is combined with the substitution of a pinch hitter who takes the pitcher's spot in the batting order so that the new pitcher will come to bat later. Since players may not return to the game after being substituted for, a manager cannot take lightly the decision when and if to substitute a better-fielding but worse-hitting player if his team is ahead.Another difference between baseball and cricket strategy is the importance of sacrifice plays in baseball. These are plays in which a batter deliberately hits in a particular way or in a particular direction to advance runner at the expense of himself getting out. For example, a poor batter may deliberately bunt a ball towards first base so that he will be easily put out, to ensure that a runner on second base will end up safe on third. A stronger batter may deliberately hit a long "sacrifice fly" that he knows will be caught so that a runner can make it home to score a run. This strategy results from the relative cheapness of individual outs in baseball and the relative importance of individual runs in baseball compared to cricket, where such a strategy would be foolish as runs cannot be scored when a wicket has fallen except in the case of a run-out.
The essential action in baseball is either to advance runners around the bases or to halt that advance. As simple as this is in principle, in practice it generates a remarkably large range of strategies. Any given situation—the number of runners on base, the bases they occupy, their skills as runners or base-stealers, the count on the hitter, the number of outs, the specialties of the pitcher and the batter, the catcher's skill at throwing out runners, the positioning of fielders, which inning is being played, and so on—allows for a considerable variety of possible plays, on either side of the ball. At any moment, one manager may be calculating how to advance his runners while the opposing manager is calculating how best to thwart his opponent. Since the variables that determine which strategies are possible or advisable change from pitch to pitch, and according to all the varieties of play situation that may come about in any game, the game played between the two managers is the most intricate aspect of the game, and for many followers of the sport is considered the true 'inner game'.
First-class cricket also has a number of strategic elements not found in baseball, simply because the maximum time duration of the game is fixed and a match not completed by the end of the time duration results in a draw regardless of the relative score. By contrast, baseball games are played to completion regardless of the time duration and there is no possibility for a tie or draw. There are no equivalents in baseball of, for example, deciding when to declare or whether or not to make your opponent follow on.
Strategy based on the playing surface
The condition of the playing strip in cricket is of vital significance as, unlike baseball, the ball more often than not is deliberately bounced on the pitch before reaching the batsman. While in baseball, playing conditions between different stadia are much the same, the physical characteristics of the cricket pitch can vary over the course of the game, or from one field to another, or from one part of the world to another. On the Indian subcontinent, for instance, pitches tend to be dry, dusty, rough and soft which tends to wear down the ball more. These pitches offer less assistance to fast bowlers because the ball tends to bounce slower and lower, where most fast bowlers rely on bounce and speed to defeat the batsman. On the other hand, spin bowlers prefer this surface because it gives greater traction to the ball and will result in the ball breaking or turning more when it hits the surface. When such a delivery is bowled, the ball is said to have "turned". Conversely, pitches in places such as Australia, England, South Africa and the West Indies tend to be hard, true surfaces, called "batting wickets" or "roads" because the ball bounces uniformly and thus batsman find it easier to score runs, although these wickets suit fast bowlers more than spinners. Accordingly, teams are generally much harder to beat in their own country, where both their batsmen and bowlers are presumably suited to the types of pitches encountered there. On any given pitch, however, conditions will become more suitable for spinners as time progresses as the pitch becomes softer and worn through use, making the spin bowler something of a cricketing "closer". The pitch can be cleaned of debris and rolled between innings, and should be mowed before each day's play at the discretion of the umpires. But the pitch cannot be watered once the match has started. Its characteristics can therefore change during the game, and can be a major factor in deciding whether to bat or field first.Baseball parks are also not completely uniform, however many of the variations in playing conditions in baseball also arise in cricket. Stadiums with retractable roofs, for example, usually play differently with and without the roof. For example, with the roof open the wind will affect how far the ball carries. Against a running team the basepaths may be heavily watered. Many stadiums have idiosyncratic features – for example, the short right field and high left field wall at Fenway Park, the hill and flagpole in the outfield at Minute Maid Park, or numerous "porches" which allow short home runs. There is an equivalent for this in cricket, where the placement of the pitch may render one perpendicular boundary significantly shorter than the other. For example, in a particular game, the leg-side boundary may be 15 feet closer to the batsman than the off-side boundary. Such a boundary can then be targeted by batmen in search of quick runs.
The baseball behaves differently in those stadiums with artificial turf as well. Artificial surfaces are harder and more uniform than grass, and the ball tends to roll farther and straighter, and to bounce truer and more highly on these fields. Teams built to play the majority of their games on this field tend to place a higher premium on defence and speed than on power hitting. The altitude of the stadium can also impact the distance a batted ball travels and the amount of ball movement a pitcher can generate with his deliveries, although recently balls have begun being placed in humidors at high-altitude parks to negate these effects. The amount of moisture in the dirt on the basepaths can also affect the behaviour of ground balls and the ease with which players may steal bases; some teams are known to alter the amount of watering done to the dirt depending on the skills of the home and visiting team. The amount of foul territory is also an important variable, since foul pop-ups that would be outs in some parks may end up in the stands in other parks, thereby allowing the batter to remain at the plate. On the whole, though, these variations do not produce effects as great as variations in cricket pitches, with one arguable exception being Coors Field.
In general, the condition of the pitch is a much greater factor in cricket than in baseball, while at the professional level stadium shape and quirks permanently built into the playing surface are greater factors in baseball than in cricket. Note that in amateur cricket pitches may have considerable variation in shape and may even incorporate obstacles, but this is not considered desirable or ideal. In baseball, familiarity with distinct field layout is considered to be an important part of having home-field advantage.
Strategy based on batting order
The batting order in baseball must be declared before the game begins, and can only be changed if a substitution occurs. Batting out of turn is a rule violation resulting in a penalty. When a manager makes a substitution, the new player must occupy the same place in the batting order as the old one. To allow more complicated changes in batting order, managers may use the double switch, substituting for two players simultaneously. This is typically used to replace the pitcher but put the new pitcher in a spot in the batting order that will not come up to bat soon, previously occupied by another fielder. However, the rule remains that no individual player can ever change his position in the batting order within the same game.Unlike baseball, the batting order in cricket is not fixed, and can be changed at any time, provided each player bats at most once per innings. This gives rise to the "pinch hitter" in cricket– a non-specialist/lower order batsman promoted up the order to get quick runs– and the Nightwatchman. This latter is typically a lower-order batsman put in to bat near the end of the day to avoid a better batsman having to make two cold starts, a particular risk. If a batsman is not ready to bat at the fall of a wicket, another batsman, typically the player who occupies the next spot in the batting order, will go out to bat in his place, to eliminate the risk of the original batsman being timed out.
The roles of individual players in the batting order are strikingly similar. In both sports, the players near the top of the batting order are considered superior batters or batsmen. The initial batters or batsmen generally specialise in avoiding making outs/losing their wicket, while the third through fifth batters and batsmen are considered their team's best at providing runs. After that, the talent generally drops off, with the pitchers and bowlers generally being the worst at batting. Because outs are less important in baseball than in cricket, poorer batters are sometimes asked to attempt a "sacrifice" play in which they deliberately get themselves out in baseball to achieve a bigger team goal. This only occasionally happens in cricket, at the end of a limited-overs game, when a poorer batsman may sacrifice himself so that his partner will be on-strike for the next delivery. Also, since in baseball a batter who puts the ball in play does not get another at-bat until the entire batting order is cycled through, the opposing team may pitch around a skilled batter, deliberately walking him so that another batter comes to the plate. In cricket, a batsman remains at the pitch until he is out, his team is all out, his captain declares or the set number of overs have been bowled, and the other team must bowl to him until he is out or one of the other above mentioned situations occur. The only way captains can negate the influence of superior batters similar to pitching around is to try to keep the more skilled batsman off-strike. This can be seen at the end of closely fought matches, where a captain might try to maximise the number of deliveries his bowlers can bowl at a non-specialist batsman. The exception is if the player is injured and has to leave the field for treatment: the next batsman in the order will then take his place. If the original batsman is able to continue later on, he can join the game again when one of his team's batsmen is out provided his injury time has expired or after 5 wickets have fallen, whichever comes first provided the rest of the team is not bowled out before either of these situations arises.
Equipment
Baseball players use thin, round bats and wear gloves to field, while cricketers use wide, flat bats and field barehanded. Note that while baseball fielders' gloves do provide modest protection against impact, they are used primarily to extend reach and are generally not padded. In cricket a batsman wears protective gear such as pads, gloves, thigh pads, helmet, a chest guard, an arm pad and a box, whereas the only required protective gear for baseball batters is an unsecured helmet ; many batters also use elbow, shin, ankle, or hand protectors, and most wear a cup and use batting gloves to aid grip.Another difference between the two sports involves the condition of the ball as a match progresses. In cricket, if a ball is hit into the stands, the spectators must return it to the field. Also, a ball that is scuffed or scratched will continue in use; a ball must be used for a minimum number of overs before it can be replaced. If a ball is damaged, lost, or illegally modified, it is replaced by a used ball of similar condition to the old one. Finally, cricketers are allowed sparingly to modify the ball, though this is highly restricted. The ball may be polished without the use of an artificial substance, may be dried with a towel if it is wet, and may have mud removed from it under supervision; all other actions which alter the condition of the ball are illegal. In Major League Baseball, a ball that is hit into the stands is never returned to play and spectators are free to keep any balls that come into their possession.
Moreover, baseballs are replaced on a regular interval during the course of a game. Major League Baseball requires the home team to supply the baseballs that will be used during that day's games. MLB further require that the home team make available at least 90 new baseballs to the umpires prior to the start of the game. Generally, a baseball is replaced every time it either is hit by a batter or touches the ground. In a typical Major League Baseball game, baseballs are replaced every five pitches or so with a total game average of around 70 baseballs being used.
Because baseball hitting is difficult, baseball rules prohibit the deliberate scratching or scuffing of a ball, or the application of any foreign substance that could conceivably affect the flight or visibility of a ball. Balls that are deliberately made more difficult to hit by applying foreign substances are often known as spitballs, regardless of the specific substance applied. Both spitballs and those that become scuffed or scratched through normal game play are immediately removed from play and never reused. The current rules regarding the condition of baseballs did not come into effect until 1920, after the death of Ray Chapman from being hit with a Carl Mays spitball. Before that point, the rules were similar to those still present in cricket. However, the new rules were not consistently enforced for several decades afterwards, and several pitchers built careers around skirting these rules, doing such things as hiding nail files in their gloves or putting Vaseline on the underside of the peaks of their caps. In modern baseball, however, the prohibition against modifying the baseball in almost any way is strictly enforced and players found to be in violation of this rule are not only ejected from the game in which the infraction occurred, but are also subject to a suspension. The only substance applied to a baseball is the Delaware River mud formula that umpires rub in before a game to remove the "shine" from the ball and improve its grip. The pitcher is also allowed to use rosin on his hands to improve his grip, and to blow on his hands in cold weather.
Statistics
Both games have a long history of using a vast array of statistics. The scorers are directed by the hand signals of an umpire. Every play or delivery is logged, and from the log, or scoresheet, is derived a summary report. Baseball commonly uses times at bat, base hits, RBIs, stolen bases, errors, strikeouts and other occurrences. These are then often used to rate the player. In cricket, commonly used individual player statistics for batsman include batting average, strike rate, and number of 50 and 100 run scores made during an innings. For bowlers, bowling average, economy rate, career wickets taken and number of five wicket hauls are commonly cited. Although cricket uses detailed statistics as a guide, owing to the variety of situations in cricket, they are not always considered a true reflection of the player. Ian Botham is an example of a player who, despite relatively poor averages, was particularly noted as one of England's greatest cricketers for his ability to dominate games.Henry Chadwick was an English-born American sportswriter, pioneer baseball statistician and historian, often called the "father of baseball". Before he first came across organised baseball in 1856, he was a cricket reporter for The New York Times and player of cricket and similar ball games such as rounders.
In baseball, questioning of the validity and utility of conventional baseball statistics has led to the creation of the field of sabermetrics, which assesses alternatives to conventional statistics. Conclusions are sometimes drawn from inadequate samples – for example, an assertion that a batter has done poorly against a specific pitcher, when they have only faced each other a handful of times, or that a player is "clutch" due to having more success with runners in scoring position or during the late innings with rather small sample sizes.
Culture
Both sports play an important part in the cultures of the societies in which they are popular. Baseball is deeply ingrained in the American psyche, and is known in the United States as "the national pastime". It is one of the sports most readily identified with the United States. Baseball references abound in American English, and the sport is well represented in American cinema in numerous baseball movies. Baseball also plays an important cultural role in many parts of Latin America,, as well as in East Asia. Many terms and expressions from the sport have entered the English lexicon. Examples are "getting to first base," "out of left field", "having two strikes against him/her", "swinging for the fences", "he struck out", "that's a home run", and "southpaw".Cricket has an equally strong influence on the culture of many nations, mainly Commonwealth nations, including England, Australia, New Zealand, South Africa, Kenya, Zimbabwe, the English-speaking Caribbean and especially in the Indian-subcontinent where it is often said to be followed like a religion. Canada has seen a marked increase in domestic, as well as interest in international cricket, over the past decade. This can be attributed, in large part, to the growing subcontinental diaspora in Canada. Cricket is the most popular sport or a major sport in most former British Colonies. Like baseball, cricket has had an influence on the lexicon of these nations with such phrases as "that's not cricket", "had a good innings", "sticky wicket", "hitting for six", "played with a straight bat" and "bowled over".
The twelve Test-playing nations regularly participate in tours of other nations to play usually both a Test and One Day International series. Twenty20 is becoming more popular in international competition. The amateur game has also been spread further afield by expatriates from the Test-playing nations. Many of these minor cricketing nations compete to qualify for the Cricket World Cup. The very first international cricket match was played between the US and Canada in 1844.
India's Indian Premier League and Australia's Big Bash League are the most popular domestic T20 leagues, attracting huge crowds and popular players. Other countries with franchise based leagues include South Africa, West Indies, England, Bangladesh, Pakistan, Sri Lanka and Afghanistan.
Baseball in a similar way has also been spread around the world, most notably in Central America and East Asia. Canadian baseball developed as a minor league sport in parallel to the US major leagues before eventually joining them. Serious domestic leagues are found in many nations including Japan, South Korea, Cuba, Venezuela, Mexico, and the Dominican Republic, and players routinely move across countries to join professional baseball teams. However, baseball does not have a robust tradition of national teams or professional international competition, although this is slowly becoming more popular around the world with the emergence of competitions like the World Baseball Classic. There have been several Australian Major League Baseball players, a country where cricket is more popular by far.
The nature of the top elite level in both sports differs markedly. Nearly all cricket revenue comes from international matches, and domestic leagues serve largely as a development ground for international players. By contrast nearly all baseball revenue comes from domestic leagues, most notably in the United States and Japan.
Cricket's international programme allows the weaker cricketing nations to play against the best in the world, and the players have the chance to become national heroes. On the other hand, the dominance of national teams also means that a great many talented cricketers in nations such as Australia and India will never receive recognition or prestige unless they make it into the national team.
Sportsmanship
Standards of sportsmanship differ. In cricket, the standard of sportsmanship has historically been considered so high that the phrase "It's just not cricket" was coined in the 19th century to describe unfair or underhanded behaviour in any walk of life. In the last few decades though, top-level cricket has become increasingly fast-paced and competitive, increasing the use of appealing and sledging, although players are still expected to abide by the umpires' rulings without argument, and for the most part they do. Even in the modern game fielders are known to signal to the umpire that a boundary was hit, despite what could have been a spectacular save and also signal if they did not take a catch even if it appeared that they did. In addition, many cricket batsmen "walk" when they think they are out, even if the umpire does not declare them out. This is considered a very high level of sportsmanship, as a batsman might easily take advantage of incorrect umpiring decisions; but with the introduction of the decision review system this has become more difficult. The "Spirit of Cricket" was added as a preamble to the Laws in 2000, declaring that "Cricket is a game that owes much of its unique appeal to the fact that it should be played not only within its Laws but also within the Spirit of the Game. Any action which is seen to abuse this Spirit causes injury to the game itself".In baseball, a player correcting an umpire's call to his own team's detriment is unheard of, at least at the professional level. Individual responsibility and vigilance are part of the game's tradition. It is the umpire's responsibility to make the right call, and matters of judgment are final. Similarly, when a runner misses a base or leaves too early on a caught fly ball, the umpire keeps silent, as it is the fielder's responsibility to know where the runners are and to make an appeal. When a fielder pretends not to know where the ball is, the umpire keeps silent, as it is the runner's responsibility to know where the ball is.
In baseball, celebrating an out, stealing bases when well ahead, or smiling on the field when well ahead are considered serious breaches of sportsmanship. Possibly the most serious breach of sportsmanship is the pitcher's throwing behind the batter, since batters often react to a pitch that may hit them by backing up.