Coefficient of relationship


The coefficient of relationship is a measure of the degree of consanguinity between two individuals. The term coefficient of relationship was defined by Sewall Wright in 1922, and was derived from his definition of the coefficient of inbreeding of 1921. The measure is most commonly used in genetics and genealogy. A coefficient of inbreeding can be calculated for an individual, and is typically one-half the coefficient of relationship between the parents.
In general, the higher the level of inbreeding the closer the coefficient of relationship between the parents approaches a value of 1, expressed as a percentage, and approaches a value of 0 for individuals with arbitrarily remote common ancestors.

Coefficient of relationship

The coefficient of relationship between two individuals B and C is obtained by a summation of coefficients calculated for every line by which they are connected to their common ancestors. Each such line connects the two individuals via a common ancestor, passing through no individual which is not a common ancestor more than once. A path coefficient between an ancestor A and an offspring O separated by n generations is given as:
where fA and fO are the coefficients of inbreeding for A and O, respectively.
The coefficient of relationship rBC is now obtained by summing over all path coefficients:
By assuming that the pedigree can be traced back to a sufficiently remote population of perfectly random-bred stock the definition of r may be simplified to
where p enumerates all paths connecting B and C with unique common ancestors, and L is the length of the path p.
To give an example:
Assuming that two individuals share the same 32 ancestors of n = 5 generations ago, but do not have any common ancestors at four or fewer generations ago, their coefficient of relationship would be
Individuals for which the same situation applies for their 1024 ancestors of ten generations ago would have a coefficient of r = 2−10 = 0.1%.
If follows that the value of r can be given to an accuracy of a few percent if the family tree of both individuals is known for a depth of five generations, and to an accuracy of a tenth of a percent if the known depth is at least ten generations. The contribution to r from common ancestors of 20 generations ago falls below one part-per-million.

Human relationships

The coefficient of relationship is sometimes used to express degrees of kinship in numeric terms in human genealogy.
In human relationships, the value of the coefficient of relationship is usually calculated based on the knowledge of a full family tree extending to a comparatively small number of generations, perhaps of the order of three or four. As explained above, the value for the coefficient of relationship so calculated is thus a lower bound, with an actual value that may be up to a few percent higher. The value is accurate to within 1% if the full family tree of both individuals is known to a depth of seven generations.
Degree of
relationship
RelationshipCoefficient of
relationship
0identical twins; clones100%
1mother / father / daughter / son50%
1parent's identical twin / identical twin's child50%
2half-sister / half-brother25%
2full sister / full brother50%
23/4-sister / 3/4-brother37.5%
2grandmother / grandfather / granddaughter / grandson25%
3half-aunt / half-uncle / half-niece / half-nephew12.5%
3aunt / uncle / niece / nephew25%
4half-first cousin6.25%
4first cousin12.5%
4sesqui-first cousin18.75%
4double-first cousin25%
3great-grandmother / great-grandfather / great-granddaughter / great-grandson12.5%
4half-grandaunt / half-granduncle / half-grandniece / half-grandnephew6.25%
4grandaunt / granduncle / grandniece / grandnephew12.5%
5half-first cousin once removed3.125%
5first cousin once removed6.25%
5sesqui-first cousin once removed9.375%
5double-first cousin once removed12.5%
6half-second cousin1.5625%
6second cousin3.125%
6sesqui-second cousin4.6875%
6double-second cousin6.25%
6sester-second cousin7.8125%
6triple-second cousin9.38%
6sesqua-second cousin10.9375%
6quadruple-second cousin12.5%
4great-great-grandmother / great-great-grandfather / great-great-granddaughter / great-great-grandson6.25%
5half-great-grandaunt / half-great-granduncle / half-great-grandniece / half-great-grandnephew3.125%
5great-grandaunt / great-granduncle / great-grandniece / great-grandnephew6.25%
6half-first cousin twice removed1.5625%
6first cousin twice removed3.125%
6sesqui-first cousin twice removed4.6875%
6double-first cousin twice removed6.25%
7half-second cousin once removed0.78125%
7second cousin once removed1.5625%
7sesqui-second cousin once removed2.34375%
7double-second cousin once removed3.125%
7sester-second cousin once removed3.90625%
7triple-second cousin once removed4.6875%
7sesqua-second cousin once removed5.46875%
7quadruple-second cousin once removed6.25%
8third cousin0.78125%
5great-great-great-grandmother / great-great-great-grandfather / great-great-great-granddaughter / great-great-great-grandson3.125%
6half-great-great-grandaunt / half-great-great-granduncle / half-great-great-grandniece / half-great-great-grandnephew1.5625%
6great-great-grandaunt / great-great-granduncle / great-great-grandniece / great-great-grandnephew3.125%
7first cousin thrice removed1.5625%
8second cousin twice removed0.78125%
9third cousin once removed0.390625%
10fourth cousin0.1953125%

Most incest laws concern the relationships where r = 25% or higher, although many ignore the rare case of double first cousins. Some jurisdictions also prohibit sexual relations or marriage between cousins of various degree, or individuals related only through adoption or affinity. Whether there is any likelihood of conception is generally considered irrelevant.

Kinship coefficient

The kinship coefficient is a simple measure of relatedness, defined as the probability that a pair of randomly sampled homologous alleles are identical by descent. More simply, it is the probability that an allele selected randomly from an individual, i, and an allele selected at the same autosomal locus from another individual, j, are identical and from the same ancestor.
The coefficient of relatedness is equal to twice the kinship coefficient.

Calculation

The kinship coefficient between two individuals, i and j, is represented as Φij. The kinship coefficient between a non-inbred individual and itself, Φii, is equal to 1/2. This is due to the fact that humans are diploid, meaning the only way for the randomly chosen alleles to be identical by descent is if the same allele is chosen twice. Similarly, the relationship between a parent and a child is found by the chance that the randomly picked allele in the child is from the parent and the probability of the allele that is picked from the parent being the same one passed to the child. Since these two events are independent of each other, they are multiplied Φij = 1/2 X 1/2 = 1/4.